SmallRig Cage Kit for Sony ZV-E1 User Manual
Model: 4257
Warnings
- Please read this User Manual carefully.
- Please keep this User Manual. Always keep this User Manual.
- When passing the products on to the third party, heed all warnings and follow all instructions in this User Manual.
In the Box
The package includes the following items:
- Cage with Silicone Grip × 1: A line drawing shows the main camera cage with an integrated silicone grip.
- HDMI Cable Clamp × 1: A line drawing depicts a small clamp designed to secure an HDMI cable.
- Allen Wrench × 1: A line drawing shows a standard L-shaped Allen wrench.
Product Details
The cage features various mounting points and components. Multiple views of the cage are presented with numbered callouts:
- ① 1/4"-20 Threaded Hole: Small threaded sockets for attaching accessories.
- ② Cold Shoe Mount: A standard cold shoe for mounting flashes or microphones.
- ③ Strap Slot: Slots for attaching camera straps.
- ④ ARRI 3/8"-16 Locating Hole: Threaded holes with anti-rotation pins for secure accessory mounting.
- ⑤ QD Socket: A quick-disconnect socket for camera straps.
- ⑥ Dual-Head Wrench: A tool included for tightening screws.
- ⑦ Arca-Swiss Quick Release Plate: A base plate compatible with Arca-Swiss tripod heads.
- ⑧ Left Side Lock Adapter: A component that secures the camera from the left side.
- ⑨ Right Side Lock Adapter: A component that secures the camera from the right side.
- ⑩ Silicone Grip: An ergonomic grip made of silicone.
Cage Installation Introduction
Follow these steps to install the cage onto your Sony ZV-E1 camera:
Step 1: Prepare the Cage
Use the included Dual-Head Wrench (⑥) to remove the Left Side Lock Adapter (⑧) and Right Side Lock Adapter (⑨) from the cage.
Diagram Description: A line drawing shows the cage with the Dual-Head Wrench being used to unscrew and detach the side lock adapters.
Step 2: Mount the Camera
Remove the camera lens. Place the Sony ZV-E1 camera into the cage, inserting it from the back towards the front.
Diagram Description: A line drawing illustrates the camera being slid into the cage from the rear. The text "*The package does not include the camera." is noted.
Step 3: Secure the Bottom Screw
Use the Dual-Head Wrench (⑥) to secure the bottom 1/4"-20 screw (①) that attaches the camera to the cage. Do not fully tighten it yet.
Diagram Description: A line drawing shows the bottom of the camera inside the cage, with the Dual-Head Wrench tightening the 1/4"-20 screw. The text "*The package does not include the camera." is noted.
Step 4: Secure Side Adapters
After fixing the Left and Right Side Lock Adapters (⑧, ⑨) with the camera's shoulder strap slots, lock them securely using the Dual-Head Wrench (⑥).
Diagram Description: A line drawing shows the sides of the camera within the cage, with the side lock adapters being tightened using the Dual-Head Wrench. The text "*The package does not include the camera." is noted for both sides.
Step 5: Final Tightening
Use the Dual-Head Wrench (⑥) to fully lock the bottom 1/4"-20 screw (①).
Diagram Description: A line drawing shows the bottom of the camera in the cage, with the Dual-Head Wrench fully tightening the 1/4"-20 screw. The text "*The package does not include the camera." is noted.
HDMI Cable Clamp Installation Introduction
Install the HDMI cable clamp to protect your HDMI connection:
Step 1: Prepare HDMI Cable
Open the camera's HDMI cover and insert the HDMI cable.
Diagram Description: A line drawing shows the camera's side with the HDMI port cover open and an HDMI cable being inserted.
Step 2: Attach and Secure Clamp
Attach the HDMI Cable Clamp to the left side of the cage using the thumbscrew. Lock the HDMI cable in place.
Diagram Description: A line drawing shows the HDMI cable clamp attached to the cage's left side, securing the inserted HDMI cable with its thumbscrew.
Silicon Grip Disassembly
To remove the silicone grip:
Use the Allen Wrench (③) to remove the screw holding the silicone grip, and then remove the silicone grip.
Diagram Description: A line drawing shows the silicone grip on the cage and the Allen wrench being used to unscrew it. The text "*The package does not include the camera." is noted.
Compatibility
Sony ZV-E1
Specifications
- Product Dimensions: 159.5 × 89.8 × 65.5mm
- Product Weight: 174.0 ± 5.0g
- Material(s): Aluminum Alloy, Stainless Steel, Silicone
