Introduction
The Gourmia Thermoelectric Ice Cream Maker allows users to easily create delicious frozen treats like gelato, frozen yogurt, sorbet, and ice cream. Its simple control panel enables customization of ice cream texture with a single button press. The machine operates efficiently without the need for chemicals, salt, or alcohol.
This manual provides comprehensive instructions for assembly, operation, cleaning, and maintenance. It is essential to read all safety instructions and directions carefully for safe usage.
Thank you for your purchase. Gourmia hopes you enjoy their innovative products.
Features and Functions
The Gourmia GSI480 Ice Cream Maker includes the following components:
- A. Transparent Upper Lid: Allows viewing of the ice cream making process.
- B. Mixing Motor: Located in the lid handle, it drives the paddle consistently, automatically adjusting speed based on ice cream texture.
- C. Ice Cream Paddle: Attached to the lid and inserted into the mixing bowl, it ensures a creamy, smooth consistency by creating small ice crystals and preventing large clumps.
- D. Housing: Contains the freezing power and control panel. Handle with care to avoid damage from hard objects.
- E. Aluminum Mixing Bowl: Holds ingredients for churning and freezing. Do not fill more than 80% of capacity, as the volume increases during churning. Avoid using sharp objects on the bowl.
- F. Power Supply: An AC adapter that connects to the machine and a standard electrical outlet.
- G. Control Panel: Allows selection of ice cream texture (Hard or Soft) and stopping the churning process.
Control Panel Options: [Hard] Hard, [Soft] Soft, [Stop] Stop
Operating Instructions
Before First Use: Clean the aluminum bowl and top lid with hot water and mild detergent.
- Insert the mixing motor into the lid and push down to lock.
- Attach the paddle to the bottom of the mixing motor and push to lock.
- Add ice cream ingredients to the mixing bowl and stir gently.
- Place the lid on the bowl, ensuring the mixing motor arm aligns correctly.
- Rotate the lid clockwise to lock it into place.
- Connect the power adapter to the ice cream maker and plug into a 100-240V 50/60Hz AC outlet. The machine will turn on, and the Stop button will light up.
- Select desired consistency (Hard or Soft) on the Control Panel. The machine will churn until the desired consistency is reached, indicated by a beep.
- Once complete, unplug the machine, press the Unlock button, turn the lid counter-clockwise, and remove it.
- Scoop ice cream into a separate bowl. For firmer ice cream, place the bowl in the freezer for about 30 minutes.
Note: Unplug the ice cream maker from the wall outlet when not in use for extended periods.
Basic Ice Cream Recipe
Ingredients:
- 3/4 cup milk
- 3/4 cup cream
- 1/4 cup sugar
Instructions:
- Pour milk, cream, and sugar into the bowl.
- Gently stir ingredients and follow general operating instructions.
Note: Do not exceed the maximum fill line inside the bowl.
Cleaning the Ice Cream Maker
- Always unplug the unit before cleaning.
- After each use, clean the lid and paddle in warm, sudsy water.
- Wipe the inside of the bowl with a clean, wet cloth.
- Use a warm, damp cloth to clean the interior and exterior of the base.
- Ensure all parts are thoroughly dried.
- Do not place any parts in the dishwasher.
Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
Troubleshooting
If you encounter issues, check the following before contacting customer support:
Symptom | Possible Solutions |
---|---|
The ice cream maker does not turn on. | Ensure the machine is plugged in and the outlet has power. Check the fuse box for working fuses. Verify the lid is correctly attached. |
The ice cream maker does not complete the churning process. | Keep the machine away from direct sunlight or heat sources. Ensure good ventilation around the machine and that fans are not obstructed. Close the lid tightly and do not open during churning. |
Warranty & Service
This Limited Warranty is valid for one year from the date of purchase, applicable only to the original purchaser. Repair or replacement of defective parts is at the seller's discretion. If repair is not possible, the seller may replace the product/part or refund its cash value.
The warranty does not cover normal wear and tear, damage from accidental negligence, misuse, or unauthorized repairs. The manufacturer is not liable for incidental or consequential damages.
For Customer Service or Questions, please call: 888-552-0033
Visit: www.gourmia.com
Disposal of the Device & Environmental Protection
Protection of the Environment: At the end of its life, the product should be taken to a specialized waste-recycling center.
The symbol [recycling symbol] on the product or packaging indicates it should not be treated as household waste. Hand it over to the appropriate collection point for electrical and electronic equipment recycling.
Proper disposal helps prevent negative environmental and health consequences. For more detailed information on recycling, contact your local council or household waste disposal service.