StorEdge® Three Phase Inverter
SE5K-RWS / SE7K-RWS / SE8K-RWS / SE10K-RWS
12 Year Warranty
Ideal solution for three phase installations with battery storage
- Simple installation with single inverter for managing both PV production and battery storage
- More energy using DC-coupled solution architecture that stores PV power directly to the battery without AC conversion losses
- Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp
- Designed to eliminate high voltage during installation, maintenance or firefighting for enhanced safety
- Built-in module-level monitoring and full visibility of battery status, PV production, and self-consumption data
- Allows connection of low voltage 48V batteries from multiple battery vendors to provide greater flexibility
Technical Specifications
| SE5K-RWS | SE7K-RWS | SE8K-RWS | SE10K-RWS | Unit | ||
|---|---|---|---|---|---|---|
| OUTPUT | ||||||
| Rated AC Power Output | 5000 | 7000 | 8000 | 10000 | W | |
| Maximum AC Power Output | 5000 | 7000 | 8000 | 10000 | VA | |
| AC Output Voltage Line to Line / Line to Neutral (Nominal) | 380/220; 400/230 | Vac | ||||
| AC Output Voltage Line to Neutral Range | 184 - 264.5 | Vac | ||||
| AC Frequency | 50/60 ± 5 | Hz | ||||
| Maximum Continuous Output Current (per Phase) | 8 | 11.5 | 13 | 16 | A | |
| Residual Current Detector / Residual Current Step Detector | 30/30 | mA | ||||
| Grids Supported Three Phase | 3/N/PE (WYE with Neutral) | |||||
| Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds | Yes | |||||
| INPUT PV | ||||||
| Maximum DC Power (Module STC) | 6750 | 9450 | 10800 | 13500 | W | |
| Transformer-less, Ungrounded | Yes | |||||
| Maximum Input Voltage | 900 | Vdc | ||||
| Nominal DC Input Voltage | 750 | Vdc | ||||
| Maximum Input Current | 8.5 | 12 | 13.5 | 16.5 | Adc | |
| Reverse-Polarity Protection | Yes | |||||
| Ground-Fault Isolation Detection | 700kΩ Sensitivity | |||||
| Maximum Inverter Efficiency | 97.3 | 97.4 | 97.6 | % | ||
| European Weighted Efficiency | 98 | % | ||||
| Nighttime Power Consumption | < 2.5 | W | ||||
| INPUT BATTERY | ||||||
| Maximum DC Power | 5000 | W | ||||
| Input Voltage Range | 40-62 | Vdc | ||||
| Maximum Continuous Input Current | 130 | Adc | ||||
| Battery Communication | CAN, RS485 (optional) | |||||
| ADDITIONAL FEATURES | ||||||
| Supported Communication Interfaces | 2 x RS485, Ethernet, Zigbee communications for Smart Energy (1), Wi-Fi(2), Built-in cellular (optional) | |||||
| STANDARD COMPLIANCE | ||||||
| Safety | IEC-62109 | |||||
| Grid Connection Standards(3) | VDE 0126-1-1, VDE-AR-N-4105, G98 / G99 | |||||
| Emissions | IEC61000-6-2, IEC61000-6-3, IEC61000-3-11, IEC61000-3-12 | |||||
| ROHS | Yes | |||||
| INSTALLATION SPECIFICATIONS | ||||||
| AC Output - Cable Gland Diameter | 15-21 | mm | ||||
| Battery DC - Cable Gland Diameter | 2 x 8-11 | mm | ||||
| PV DC Input | 2 x MC4 pair | |||||
| Dimensions (HxWxD) | 853 x 316 x 193 | mm | ||||
| Operating Temperature Range | -40 - +60 | °C | ||||
| Cooling | Internal and external fans | |||||
| Weight | 37 | kg | ||||
| Noise | < 50 | dBA | ||||
| Protection Rating | IP65 Outdoor and Indoor | |||||
| Mounting | Bracket provided | |||||
For more information refer to: SE Zigbee Plug-in Wireless Communication for SetApp Datasheet
Wi-Fi connectivity requires an external antenna. For more information refer to: SE Wi-Fi/Zigbee Antenna Datasheet
For all standards refer to Certifications category in Downloads page: SolarEdge Support Downloads
SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 11/2019. V.01. Subject to change without notice.
CE
