User Manual for BrightAI models including: 810-00006, 81000006, 2A9AC810-00006, 2A9AC81000006, 810-00006 Pan and Tilt Laser Scanner, 810-00006 Laser Scanner, Pan and Tilt Laser Scanner, Laser Scanner, Tilt Laser Scanner, Pan Laser Scanner, Laser Scanner, Scanner
BrightAI 810-00006 2A9AC810-00006 2A9AC81000006 810 00006
Pan and Tilt Laser Scanner Warning: Warning content...... Product Name: Scanner, Pan and Tilt Trademark: BrightAI Apply for business name: BrightAI model : 810-00006 1. Overview Thank you for choosing our products! Please carefully read this product User Guide to ensure the quick to install and use this product. The Laser Scanner is a semi-automated device to accurately measure and digitally model swimming pools. This product is a custom, purpose-built opto-mechanical system that's controlled by Latham Measure APP. 2. Components iPad Laser Scanner AR Tags X 2 Battery USB-C cable USB-C charger Mount plate Tripod Screw mounting kit 3. Input DC15V 3A 4. Wireless Wi-Fi: 2412-2462MHz 5180-5240MHz 5745-5825MHz 5. Installation a) Level the Tripod b) Mount the Mount Plate on the Johnny5 Adjust the position of the Mount Plate until the four screw holes of the Mount Plate are aligned with the screw holes on theScanner, and then use the Screw mounting kit to attach it. c) Attach the Scanner with Mount Plate to the Tripod Adjust the position of the scanner with Mount Plate until the center hole of the Mount Plate is aligned with the center hole of the Tripod. Insert the mounting screw of the tripod into the center hole of the scanner and tighten. d) Connect Scanner to the USB-C Cable e) Device Power There are two methods to power the Scanner:: using a 15V PD capable Battery or using a 15V PD capable USB-C Power Supply.. f) Follow the instructions in the Latham Measure app to control the Scanner. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l' utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique re?u, même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif. the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems l'appareil destiné à fonctionner dans la bande 51505250 MHz est destiné uniquement à une utilisation en intérieur afin de réduire les risques de brouillage préjudiciable des systèmes mobiles par satellite à co-canal The distance between user and products should be no less than 20cm La distance entre l'utilisateur et les produits ne doit pas être inférieure à 20 cm Per FCC 15.407(c) and RSS-247 issue 2 clause 6.4a, the device will automatically discontinue transmission in case of either absence of information to transmit or operational failure.Microsoft Word for Microsoft 365