Bryton Rider 35 GPS Cycling Computer

Buttons and Controls

The Rider 35 features several buttons for operation:

Button Layout: A diagram shows the Bryton Rider 35 device with its primary buttons. Button 1 is labeled 'Power / Back', Button 2 is 'Start / Stop', Button 3 is 'Mode / Up', and Button 4 is 'Lap / Down'. Smaller buttons labeled 'MODE' and 'BACK' are also indicated.

Button 1 (Power / Back): Press and hold to turn the Rider 35 on or off. Press to return to the previous page or cancel an operation.
Button 2 (Start / Stop): In menu mode, press to enter or confirm a selection. In free cycling mode, press to start recording. Press again to stop recording.
Button 3 (Mode / Up): Press to switch modes: Meter, Find & Go, Altitude Chart, and My Buddy. In menu mode, press to move up to scroll through menu options.
Button 4 (Lap / Down): In menu mode, press to move down to scroll through menu options. While recording, press to start to record a lap.

Resetting the Rider 35

To reset the Rider 35, press and release both the [Power/Back Button] and the [Lap/Down Button] at the same time.

Accessories

The Rider 35 comes with the following accessories:

USB cable
Bike mount

Optional items include:

Speed/Cadence sensor
Power adapter
Heart rate belt
Plug(s)

Status Icons

The Rider 35 displays various status icons:

Icon	Description
?	Bike in use
?1	Bike 1
?2	Bike 2
?️	GPS Signal Status
?️❌	No signal (not fixed)
?️⚠️	Weak signal
?️✅	Strong signal
?	Power Status
?100%	Full battery
?50%	Half battery
?25%	Low battery
❤️‍?	Heart Rate Sensor Active
⚡️	Cadence Sensor Active
?	Speed Sensor Active
⏺️	Log Record in Progress
?️	Training mode
?	Free ride mode
?️	Navigation mode

Note: Training Plan and Log Record are displayed only when they are in progress.

Charging the Battery

To charge the battery, connect your Rider 35 to your computer using the USB cable.

Turning On the Rider 35

Press and hold the Power button [?] to turn on the Rider 35.

Acquire Satellite Signals

Once the Rider 35 is turned on, it will automatically search for satellite signals. It may take 30 to 60 seconds to acquire signals.

Initial Setup

When turning the Rider 35 on for the first time, the setup wizard appears on screen. Follow the instructions to complete setup:

Select the display language and time zone.
Select the unit of measurement.
Enter your "user profile". (It is recommended to input the data, as data accuracy highly affects your training analysis.)
Read and accept the Safety Agreement.

Note: If you want to change the language on the device, change the setting via Bryton Bridge -> Rider 35 -> Language.

Ride Your Bike with Rider 35!

Enjoy your rides with the Rider 35:

Ride using the free cycling mode or set up a training program through the Menu options.
Press the [Mode Button] ⚙️ to switch between modes.
Select from the available modes: Meter, Find & Go, Altitude Chart, and My Buddy.
In free cycling mode, press [Start/Record Button] ▶️ to start recording your ride. Press again to stop recording.

Manage Rider 35 Data via Your Computer

To manage your ride data:

Connect your Rider 35 to your computer using the USB cable.
Install the Bryton Bridge application. You can download it from http://corp.brytonsport.com/supportSDownload.html or use the bundled CD.
Follow the on-screen instructions to transfer data to your computer.

Share Your Experience With Other Bikers

To share your experiences and training results with other bikers worldwide, please visit http://Brytonsport.com.

Switching Modes

You can switch between different modes on the Rider 35 using the [Mode Button] ⚙️. Available modes include:

Meter
Find & Go
Altitude Chart
My Buddy
Training
View History

Mount the Rider 35 to the Bike

A visual diagram shows the Rider 35 device being mounted onto a bicycle handlebar. The device is secured to a mount, which is then attached to the handlebars.

	Bryton Cycling Computers and Accessories Catalog 2022 Explore the full range of Bryton GPS cycling computers, including the Rider S800, S500, 750, 420, 320, and 15 neo, along with the Gardia R300 rearview radar. Discover features like advanced navigation, training dynamics, smart notifications, and the Bryton Active app.
	Bryton Rider S800 Quick Start Guide Get started quickly with the Bryton Rider S800 GPS cycling computer. This guide covers essential setup, button functions, data synchronization with the Bryton Active app, navigation features, and workout planning to enhance your cycling experience.
	Bryton Rider 750 GPS Cycling Computer: Quick Start Guide Discover the Bryton Rider 750, a feature-rich GPS cycling computer. This guide covers essential setup, navigation, data synchronization with the Bryton Active app, and route following capabilities for cyclists.
	Bryton Rider 450 User Manual: Setup, Features, and Operation Comprehensive user manual for the Bryton Rider 450 GPS cycling computer, detailing setup, features, settings, data sync, training, and troubleshooting for cyclists.
	Bryton Rider 860 Quick Start Guide Get started quickly with the Bryton Rider 860 GPS cycling computer. This guide covers setup, key functions, navigation, and app connectivity for cyclists.
	Bryton Rider 15 User Manual: Setup, Features, and Specifications Comprehensive user manual for the Bryton Rider 15 cycling GPS computer. Learn how to set up, use features like sensors and notifications, and find detailed specifications.
	Bryton Rider 450 User Manual Comprehensive user manual for the Bryton Rider 450 GPS cycling computer, detailing setup, operation, training features, navigation, settings, and connectivity with the Bryton Active App.
	Bryton Rider S800 GPS Cycling Computer User Manual Comprehensive user manual for the Bryton Rider S800 GPS cycling computer, covering setup, features, navigation, settings, and maintenance for cyclists.