Warrky BR01 Bluetooth Receiver User Guide

Product Overview

This guide provides instructions for the Warrky BR01 Bluetooth Receiver (BRO Series).

Key Features:

• Connects audio devices wirelessly via Bluetooth.
• Supports USB-C power input.
• Includes RCA and 3.5mm audio output options.

Product Schematic

Components:

• USB-C Power Port: For connecting the power supply.
• Power Switch: To turn the device on/off.
• Function Button: Used for pairing and other functions.
• LED Indicator: Shows the status of the device.

Connection Steps

1. Connect the power supply (USB-C cable) and the audio cable (RCA or 3.5mm Aux) to the BR01.
2. Turn on the power switch.
3. Press and hold the function button until the indicator light flashes rapidly to enter pairing mode.
4. On your phone or other Bluetooth-enabled device, navigate to Bluetooth settings, find 'BR01', and connect.

Connection Schematic:

Visual representation showing connections between a power source (USB-C), the BR01 unit, and audio output devices (speakers, amplifier, headphones) via RCA or 3.5mm cables. Also shows mobile devices (phone, tablet, laptop) connecting wirelessly via Bluetooth.

Package Contents

• Bluetooth Receiver (BR01)
• RCA to 3.5mm Audio Cable (or 3.5mm to RCA)
• USB-C Power Cable

Function Buttons and Light Status

• Function Button: Long press to start pairing.
• LED Indicator:
• Slow Flashing: Unpaired
• Rapid Flashing: Pairing
• Steady On: Paired
• Pause/Play: Short press the function button.

Troubleshooting & Operation Guide

If there is no sound:

1. Check the volume settings on both the input and output devices.
2. Ensure the product is connected to the 'Aux in' port of the audio device, not an 'AUX out' port.
3. Some audio devices may require switching the audio output channel.

Add a new device:

Long-press the function button to enter pairing mode, then pair and connect via Bluetooth on the new device.

Switch devices:

Disconnect from the original device in its Bluetooth settings, then connect with another device.

Renaming Devices (for multiple units):

1. Go to your phone/tablet's Bluetooth settings.
2. Identify each 'BR01' device.
3. Tap the icon next to a 'BR01' device to access its settings.
4. Select 'Rename' and assign a unique name (e.g., 'BR01-Living Room').

Notes

This product is designed exclusively for receiving Bluetooth signals and does not support Bluetooth transmission. It can only connect to external Bluetooth-enabled devices (e.g., smartphones, tablets, laptops) as a receiver to stream audio or data from them. It cannot act as a transmitter to send signals to other devices.

Customer Support

For assistance, please contact Warrky customer support:

• Email: support@warrky.com
• Amazon Seller Page: Use the 'Ask a question' feature.
• Website: Visit www.warrky.com and navigate to 'SUPPORT'.

Expect a friendly and efficient response within 18 hours, including weekends and holidays.

Warranty: Activate your lifetime unconditional warranty at www.warrky.com >>> WARRANTY.

Suggestions/Collaboration: For ideas or proposals, email official@warrky.com.

FCC Compliance Information

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.