Hoshizaki IM-500SAB Stackable Square Cuber
Model: IM-500SAB | Air-Cooled | Item #: 13553 | Date: 10/10/24
Product Overview
The Hoshizaki IM-500SAB is an air-cooled, stackable square cuber ice maker designed for commercial use. It is shown here with an optional storage bin, model B-700. The unit features a durable stainless steel exterior and produces individual square cubes.
Key Features
- ✔️ Individual square cube
- ✔️ Durable stainless steel exterior
- ✔️ Stackable for up to three times the ice production in the same floor space
- ✔️ Up to 489 lbs. of ice production per 24 hours
- ✔️ Stack 2 units high for 978 lbs. per 24 hours (Stacking kit: HS-5530 required)
- ✔️ Stack 3 units high for 1467 lbs. per 24 hours (Two stacking kits: HS-5530 required)
- ✔️ EverCheck™ alert system
- ✔️ R-404A Refrigerant
Available Bin Models:
B-700, B-800, B-900, B-1150, B-1300, B-1500, B-1650. A top kit may be required; consult Bin Spec Sheets. Not recommended for use on large upright bins.
Specifications
Ice Production, Water Usage, and Electrical
| Condenser | Model | Air / Water Temp (70°/50°F) | Air / Water Temp (90°/70°F) | Potable Gal. per 100 lbs. (90°/70°F) | Condenser Gal. per 100 lbs. (90°/70°F) | kWh Used per 100 lbs. (90°/70°F) | Min. Circuit/ Max. Fuse Size | Amperage | Voltage | Circuit Wires (including ground) | Heat Rejection BTU/hr. | Charge Amount | Net / Ship Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Air | IM-500SAB | 489 lbs. | 414 lbs. | 23.0 | N/A | 5.8 | 20A | 11.5A | 115V/60/1 | 3 | 4,500 | 1 lb. 10.5oz | 196 / 234 |
IM Cube Dimensions
Approximate cube size: 1" x 1 1/4" x 1" (28mm x 32mm x 28mm). Note: Image is not to scale.
Operating Information
Operating Limits
- Ambient Temp Range: 45-100°F
- Water Temp Range: 45-90°F
- Water Pressure: 10-113 PSIG
- Voltage Range: 104-127V
- If GFCI protection is required, a GFCI breaker must be used in lieu of a GFCI receptacle.
Service Access
- Removable and cleanable air filters are located on the front and right side.
- Panels are designed for easy removal, providing accessible service points for all components.
Plumbing Requirements
- Icemaker Water Supply Line: Minimum 1/4" Nominal ID Copper Water Tubing or equivalent.
- Icemaker Drain Line: Minimum 3/4" Nominal ID Hard Pipe or equivalent.
Clearance Requirements
- Allow 6 inches clearance at the rear, left side, and top.
- Allow 12 inches clearance at the right side for proper air circulation and ease of maintenance/service.
Water Filter
Refer to the water filter specification sheet for recommendations.
Warranty and Shipping
Warranty Information
3 Year Parts & Labor on the entire machine. 5 Year Parts on the Compressor and air-cooled condenser coil. Warranty is valid in the United States, Canada, Puerto Rico, and U.S. Territories. Contact the factory for warranty details in other countries.
Shipping Information
Shipping Dimensions (LxWxH): 48" x 32" x 27.9". Shipping Volume: 24.8 ft³.
Diagrams Description
The unit has overall dimensions of approximately 44 inches (width) x 27 5/8 inches (depth) x 21 3/4 inches (height).
Overall Unit Views and Dimensions:
- Front View: Width 44" (1118mm), Height 21.7" (550mm).
- Side View: Depth 27.5" (700mm), Height 21.7" (550mm).
- Bottom View: Width 44" (1118mm), Depth 26.4" (672.3mm). This view indicates the ice drop zone.
- Rear View: Height 21.7" (550mm). Key features include an electrical supply opening (7/8" dia), a water inlet connection (1/2" FPT), and a water outlet connection (3/4" FPT). Mounting holes are also indicated.
