nVent CADDY 708SF Push Install Rod/Wire Hanger with Shot-Fire Bracket, 1/4" Rod

Catalog Number: 708SF

Product Description

The nVent CADDY 708SF is a push-install rod/wire hanger designed for use with a shot-fire bracket. It allows for pre-assembly of wire or plain rod, facilitating suspension from horizontal structures. This hanger is engineered for quick and secure attachment to concrete, steel, or composite metal decking.

Key Features:

Permits pre-assembly of wire or plain rod.
Suspends wire or plain rod from horizontal structures.
Includes a shot-fire bracket and a pre-assembled drive pin compatible with DEWALT® tools.
Quickly and easily attaches to concrete, steel, or composite metal decking.
Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools.
ICC-ES ESR-2024 evaluation report is available for the DEWALT® drive pin.

Product Attributes

Attribute	Value
Material	Steel; Spring Steel
Finish	Electrogalvanized; nVent CADDY Armour
Rod Size	1/4"
Wire Size	#8
Height	3 1/16"
Width	2 1/4"
Dimension A	1.300"
Static Load Capacity	100 lb

Additional Product Details

This product utilizes a Powers Fasteners, Inc. part number 50032 drive pin.

The static load capacity was established based on a 1-inch (25.4 mm) embedment depth in 3,000 psi (20.68 MPa) lightweight concrete. For variations in embedment depth and material, consult anchors.dewalt.com.

The pre-assembled drive pin is compatible with a wide range of fastening tools, including:

Powers® C4CZ
Simpson® GCN-MEPKT
SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60, P7201
Sniper®
Ramset® 721, Cobra, D45 / D60 / D60L, M70, SA270, T3SS, TS750P, TS60P, Viper®
Hilti® DX35, DX350 / DX351 / DX36M, DX100 / DX200, DX460, DXA40, DXA41, DXE72 / DX400
Würth® Diva-1, BST-1, BST-2, or equivalent nailers.

For shot-fired supports in seismic design categories D, E, or F, the maximum load is the lesser of 90 lb (400 N) or the published load.

Diagrams

Product Illustration: The product is a metal hanger bracket designed to attach to structural elements. It features a pre-assembled drive pin and a hook or loop for suspending a rod or wire. The illustration shows its compact form factor and how it integrates with the fastening pin.

Dimensional Drawing: A line drawing indicates the key dimensions of the hanger. 'H' represents the height (3 1/16 inches), 'W' represents the width (2 1/4 inches), and 'A' represents a specific mounting dimension (1.300 inches). 'RS' denotes the rod size, which is 1/4 inch.

Warning

nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.

Contact Information & Brands

For inquiries and support, nVent offers regional contact points:

North America

+1.800.753.9221 (Option 1 - Customer Care)
+1.800.753.9221 (Option 2 - Technical Support)

Europe

Netherlands: +31 800-0200135
France: +33 800 901 793
Germany: 800 1890272
Other Countries: +31 13 5835404

APAC

Shanghai: +86 21 2412 1618/19
Sydney: +61 2 9751 8500

nVent's powerful portfolio of brands includes:

© 2022 nVent. nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

	nVent GUV16070 Ground Rod Clamp: Specifications and Features Detailed specifications and features for the nVent GUV16070 U-bolt ground rod clamp, designed for copper-bonded ground rods and compatible with various conductor sizes. Includes compliance information and product attributes.
	nVent ESD Clip for Strut for AdvancedMC - Product Information Detailed information on the nVent ESD Clip for Strut, catalog number 20849-021, designed for AdvancedMC guide rails. Includes product attributes and installation warnings.
	nVent CADDY Microfix Double Pipe Clamp MDC023 - Technical Specifications Detailed technical specifications and features for the nVent CADDY Microfix Double Pipe Clamp (MDC023), designed for fast installation and noise reduction in piping systems, compliant with various DIN standards.
	ProAir Harsh Environment Indoor CR23 Air Conditioner - 1600 BTU, 115V Detailed information on the nVent ProAir Harsh Environment Indoor CR23 air conditioner, featuring 1600 BTU cooling capacity, 115V operation, and a durable light gray steel construction for corrosive environments. Includes product attributes, features, and industry standards.
	nVent Mining Switchgear: Rugged, Portable, and Customized Solutions for Tough Environments Discover nVent's comprehensive range of reliable and safe mining switchgear, including substations, switch units, and breaker units. Engineered for harsh conditions with advanced safety features and customizable options for surface mining operations.
	nVent MI9 Series 100mm Plinth Base - Installation and Specifications Details on the nVent MI9 Series 100mm Plinth Base, including part number MHPL0806C141S, features, materials, and installation warnings. Learn about its use with M19 enclosures for cable management.
	nVent CADDY WBT Performance Cable Tray Polymer Insert \| Specifications & Options Explore the nVent CADDY WBT Performance Cable Tray Polymer Insert. Discover flame-retardant polymer solutions for cable tray protection, available in various sizes and configurations. View specifications and catalog numbers.
	nVent LENTON Bottom Support Clamp, Horizontal Side - Product Overview Detailed information on the nVent LENTON Bottom Support Clamp for horizontal side fill applications, including features, specifications, and diagrams.