Mi Portable Speaker Instructions

Overview

A compact, cylindrical portable Bluetooth speaker with a fabric grille and an orange fabric loop for carrying.

Key components:

• Charging Port
• Power Button
• Indicator Light

How to Use

Charging

When the speaker is off, the indicator is orange and turns off once fully charged. When charging while the speaker is on, there is no charging indicator. If the battery is running low when turning on the speaker, the indicator blinks orange. Please recharge soon.

Power Operations

Turning On

Press and hold the power button for 2 seconds. The indicator will be blue for 1 second, then the Mi Portable Bluetooth Speaker is turned on. The speaker waits for a connection when turned on for the first use.

Turning Off

Press and hold the power button for 2 seconds to turn off the Mi Portable Bluetooth Speaker.

Resetting

If there is any problem with sound, Bluetooth, or battery charging, press and hold the power button for 12 seconds. The reset is completed after the indicator stays orange for 1 second.

Connecting

Connecting to a Device

Press and hold the power button for 2 seconds. After the indicator stays blue for 1 second, the speaker is turned on. Then the indicator blinks blue, indicating the speaker is waiting for a connection. Enable Bluetooth on your device, then locate and connect "Mi Portable Bluetooth Speaker". If a passcode is requested, enter "0000". Once connected, the indicator remains blue. If the speaker is not connected to any device within 30 minutes, it will automatically turn off.

Automatic Connection

The Mi Portable Bluetooth Speaker will automatically connect to the recently paired Bluetooth device once turned on. If no connection history is detected or it fails to connect, the indicator blinks blue, and the speaker enters awaiting connection mode. Note: If automatic connection fails, manually connect via your device's Bluetooth settings.

Connecting to a New Device

Ensure your speaker is off. To prevent automatic connection to a previously paired device, press and hold the power button for 6 seconds. The indicator stays blue for 1 second, the speaker turns on and enters awaiting connection mode. Enable Bluetooth on your new device and connect.

Connection Interrupted

If your device goes out of wireless range, the connection will be interrupted. If your device is back in range within 30 minutes, the speaker will automatically reconnect. If not connected within 30 minutes, it will turn off. If Bluetooth on your device is disabled or turned off, the speaker will enter awaiting connection mode.

True Wireless Stereo (TWS) Function

The TWS function allows two Mi Portable Bluetooth Speakers to connect for wireless audio with a stereo effect.

Enabling TWS

Method A:

Connect Speaker A to your device. Press Speaker A's power button twice to enter TWS pairing mode. Turn on Speaker B, ensuring it's waiting for a connection and not connected to any devices. The two speakers will connect automatically.

Method B:

Turn on two Mi Portable Bluetooth Speakers, ensuring they are not connected to any devices. Press either speaker's power button twice to enter TWS pairing mode. They will connect automatically. Then, enable the Bluetooth function on your device and connect your device to the speakers.

Disabling TWS

To disable TWS, press the power button of either speaker twice.

Notes on TWS

• When successfully connected to your device, TWS is enabled. The speaker with a solid blue indicator is the right channel; the one with a blinking blue indicator is the left channel. Play/Pause functions are available on both speakers.
• During calls when TWS is enabled, only the right channel speaker works.

Button Instructions

Specifications

Important Information

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

EU Declaration of Conformity

CE Hereby, Tiinlab declares that the radio equipment type XMYX04WM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Safety Cautions

• Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.
• Replacement of a battery with an incorrect type that can defeat a safeguard (e.g., catching fire, explosion, leakage of corrosive electrolyte).
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The product's maximum operating ambient temperature is 40°C.
• The speaker can be used in tropical climates.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• To prevent possible hearing damage, do not listen at high volume levels for long periods.

The [DC voltage symbol] symbol indicates DC voltage.

The marking information is located at the bottom of the speaker.

Trademarks and Manufacturer Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Tanilba Acoustic Technology Limited (a Mi Ecosystem company)

Address: Tianliao Building I-403, Tianliao Industrial Area A, Taoyuan Street, Nanshan District Shenzhen 518055, China

For further information, please go to www.mi.com.