Genie® GS™-1932 E-Lift Electric Slab Scissor Lift

Specifications

Models: GS-1932 E-Lift (Full Outdoor Height)

Measurements	US	Metric
Working height max. - indoor⁽¹⁾	24 ft 6 in	7.64 m
Working height max. - outdoor⁽¹⁾	24 ft 6 in	7.64 m
Platform height max. - indoor	18 ft 6 in	5.64 m
Platform height max. - outdoor	18 ft 6 in	5.64 m
Platform height - stowed	2 ft 11 in	0.89 m
Platform length - outside	6 ft 2 in	1.88 m
Platform length - outside, extended	9 ft 2 in	2.79 m
Slide-out platform extension deck - length	3 ft	0.91 m
Platform width - outside	2 ft 6.5 in	0.78 m
Guardrail height	3 ft 7 in	1.10 m
Toeboard height	6 in	15 cm
Machine Height - stowed (fixed guardrails)	6 ft 7 in	2.00 m
Length machine - stowed (integrated ladder or w/out ladder)	6 ft 2 in	1.88 m
Length machine - stowed, extended	9 ft 2 in	2.79 m
Width	2 ft 8 in	0.81 m
Wheelbase	5 ft 1 in	1.55 m
Ground clearance (center) - pothole guards retracted	4 in	10 cm
Ground clearance - pothole guards deployed	0.8 in	2 cm

Productivity

Max. platform occupancy (in/out)	2/1
Lift capacity	500 lb	227 kg
Lift capacity - extension deck extended	250 lb	113 kg
Max. platform drive height	18 ft 6 in	5.64 m
Drive speed - stowed	2.5 mph	4.0 km/h
Drive speed - raised	0.5 mph	0.8 km/h
Gradeability - stowed⁽²⁾	25%
Turning radius - inside/outside	0/5 ft 1 in	0/1.80 m
Lifting speed - raise/lower	33/30 sec
Tilt sensor activation (front to back/side to side)	3°/1.5°
Tires - solid non-marking	12x4.5 in	31x11 cm

Power

Power - FLA⁽³⁾: 24V DC (2x12V 150Ah)
Power - AGM: 24V DC (2x12V 145Ah)
Power - Lithium-Ion: 24V DC (1x24V 90Ah or 106Ah)

Weight and Floor Loading

Weight	3,468 lb	1,573 kg
Weight max. (adding all possible options)	3,655 lb	1,658 kg
Tire load max.	1,748 lb	793 kg
Tire contact pressure	194 psi	1,338 kPa
Occupied floor pressure	258 psf	12.36 kPa

Sound and Vibration Levels

Sound Pressure level (ground workstation): < 70 dBA
Sound Pressure level (platform workstation): < 70 dBA
Vibrations: <8 ft 2 in/s² (<2.5 m/s²)

⁽¹⁾ The metric equivalent of working height adds 2 m to platform height. US adds 6 ft to platform height.

⁽²⁾ Gradeability applies to driving on slopes and may vary depending on options and machine configurations. See operator's manual for details regarding slope ratings.

⁽³⁾ Subject to regional availability.

⁽⁴⁾ Weight refers to standard configuration and may vary depending on options and/or country standards.

⁽⁵⁾ Floor loading information is approximate and may vary depending on options and machine configurations. It should be used only with adequate safety factors.

Diagram Description: The document includes diagrams illustrating the Genie GS-1932 E-Lift from different angles (A-I), showing its overall structure, dimensions, and key components.

SKU: Standard Model

GS-1932, E-Lift, E-Steer, AGM, Full Outdoor Height*
* Build to Order

Option Availability

	S	S+	Bto	Standard	Standard +	Build to Order	Standard Features	Options
AGM Maintenance-free batteries	✔			✔			✔
Lithium-Ion battery, 106Ah, UL certified		✔			✔			✔
Battery Isolation Kit			✔			✔
Dual Pole Battery Isolation Kit			✔			✔
Rear recessed charger receptacle	✔			✔			✔
Fixed rails, Half-height swing gate	✔			✔			✔
Slide out extension deck	✔			✔			✔
240Volt Power To Platform Kit			✔			✔
EQSS Overwatch Smartlink			✔			✔
Fold Down Handrails	✔			✔			✔
Forming Platform Controls Smartlink GS			✔			✔
Platform Worklights (Single)			✔			✔
White Noise Alarm Sound Sensitive Kit			✔			✔
Descent, tilt and motion alarm			✔			✔
Diamond plate platform deck	✔			✔			✔
Dual LED flashing beacons			✔			✔
Electric horn	✔			✔			✔
Lanyard attachment points	✔			✔			✔
Platform load sense system	✔			✔			✔
Proportional drive and lift	✔			✔			✔
SmartLink single zone control system			✔			✔
Lift Connect Telematics			✔			✔
Telematics-ready	✔			✔			✔
Lift Connect with Access Manager upgrade			✔			✔
E-Lift, E-Steer	✔			✔			✔
Battery Guard - Anti-theft			✔			✔
Lift Tools Tool Tray	✔			✔			✔
Wheel Chock Kit			✔			✔
Auxiliary platform lowering	✔			✔			✔
Driveable at full height	✔			✔			✔
Dual front wheel sealed AC electric drive motors	✔			✔			✔
Electric brake release	✔			✔			✔
On board diagnostic system with battery charge indicator	✔			✔			✔
Pothole protection	✔			✔			✔
Side and rear fork pockets			✔			✔
Solid non-marking tires	✔			✔			✔
Tech Pro Link connector	✔			✔			✔
Tie-down and lifting points	✔			✔			✔

Genie Genuine Accessories

Lift Tools Work Tray
Lift Tools Productivity Tools
Lift Guard Safety Tools
Tech Pro Link Handheld Device

More accessories available from Genie Genuine Parts.

Product specifications are subject to change without notice or obligation. Photographs and/or drawings herein are for illustrative purposes only. Refer to the appropriate Operator's Manual for instructions on proper equipment use. Failure to follow instructions in the Operator's Manual may result in serious injury or death. The only warranty applicable to Genie equipment is the standard written warranty applicable to the particular product and sale, and Genie makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Terex, Genie, Quality By Design, Xtra Capacity, Lift Power, Lift Guard, Lift Tools, Lift Connect and Tech Pro Link are registered trademarks of Terex Corporation or its subsidiaries.

Models: GS-1932, GS-1932 Electric Scissor Lift, Electric Scissor Lift, Scissor Lift, Lift

Google Docs
Google Drive
Download [pdf]
Download Optimized

File Info : application/pdf, 2 Pages, 850.98KB

gs1932 elift-product-specifications-2025 en-au Adobe PDF Library 17.0 Adobe InDesign 19.5 (Macintosh)

Related Documents

	Genie GS-1932 E-Lift Electric Slab Scissor Lift Specifications Explore the Genie GS-1932 E-Lift, an electric slab scissor lift. This document details its key specifications, including working height, lift capacity, power options, and dimensions, along with available features and accessories for industrial and construction use.
	Genie GS-1932 E-Lift Electric Slab Scissor Lift Specifications and Options Detailed specifications, measurements, productivity, power, weight, and available options for the Genie GS-1932 E-Lift electric slab scissor lift, designed for efficient indoor and outdoor access.
	Genie GS-1932 E-Lift Electric Slab Scissor Lift Specifications Detailed specifications for the Genie GS-1932 E-Lift electric slab scissor lift, including measurements, productivity, power, weight, and sound/vibration levels. Features include working height, platform height, lift capacity, gradeability, and drive speed.
	Genie GS™-1932 E-Lift Electric Slab Scissor Lift Specifications and Options Detailed specifications, productivity metrics, power information, weight data, and available options for the Genie GS™-1932 E-Lift electric slab scissor lift. Includes measurements, gradeability, lift capacity, and accessory information.
	Genie GS-4655 Electric Slab Scissor Lift Specifications Detailed specifications for the Genie GS-4655 Electric Slab Scissor Lift, including measurements, productivity, power, weight, and sound/vibration levels. Features E-Drive technology and various configuration options for industrial use.
	Genie GS-4655 Electric Slab Scissor Lift Specifications and Features Detailed specifications, features, and options for the Genie GS-4655 Electric Slab Scissor Lift, including measurements, productivity, power, weight, and safety information. Optimized for search engines.
	Genie GS Series Operator's Manual: Operation, Safety, and Transport Comprehensive operator's manual for Genie GS Series scissor lifts, covering operation, safety procedures, maintenance, and transport guidelines. Includes model information for GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH, GS-2032, GS-2632, GS-3232, GS-2046, GS-2646, GS-2646 XH, GS-3246, GS-3246 XH, GS-4046.
	Genie GS-1530, GS-1532, GS-1930, GS-1932 Parts Manual This parts manual provides detailed information for Genie GS-1530, GS-1532, GS-1930, and GS-1932 series scissor lifts, including part numbers, descriptions, and diagrams for maintenance and ordering.