Bluetooth Keyboard User Manual

Product Specifications

• Bluetooth 3.0 interface standard
• Operating Distance: ≤10 meters
• Modulation system: GFSK
• Operation Voltage: 3.0-4.2V
• Operation current: <2.5mA
• Standby Current: <0.3mA
• Sleeping Current: <40uA
• Charging Current: >200mA
• Standby Time: < 100 days
• Charging Time: 3-4 hours
• Battery Capacity: 150mA
• Continuous Working Time: <2.5 hours (with backlight) / 100 hours (without backlight)
• Lithium Battery Life: 3 years
• Key Strength: 80+-10g
• Key life: 5 million strokes
• Operating Temperature: -10~55 °C

Operation Guide

1. Button

OFF/ON Power Switch: Slide the switch to turn on or turn off the Bluetooth connection.

Connect Button: Long press the "Connect" button for 3 seconds, the light starts to twinkle, then the keyboard is ready to connect to the Samsung tablet.

2. Indicator

• Power Indicator: Turn on the power toggle switch. The indicator light will twinkle for 4 seconds, then go off.
• Bluetooth Connect Indicator: Long press the [Connect] button, the [Bluetooth] indicator light will keep blinking, and the indicator light will stay on until the keyboard connects with your device.
• Caps Key Indicator: The indicator light will stay on under capital letter status.
• Charging Indicator: Indicator light will be on when the keyboard is charging by USB.

3. Backlight Operation

• Press Once: Turn on the backlight
• Press Twice: Switch to breathing backlight mode
• Press Three Times: Turn off the backlight
• RGB Key: Adjust rainbow backlight mode

Charging

When the battery is low, the power indicator light will keep flashing, which means you need to charge the Bluetooth keyboard.

1. Connect the Micro USB end of the charging cable to the keyboard.
2. Connect the A end of the charging cable to your power adapter.
3. The "Charge" indicator will light on during charging, and when the battery is full of charge, the light will automatically go out.

Bluetooth Connection Steps

1. To set the power button to "ON" position, the power indicator will light on for 4 seconds and then go off.
2. Long press the "Connect" button, the Bluetooth indicator will keep twinkling. The keyboard is ready to connect.
3. Click the "Settings" icon on your Samsung Tablet, and then click "Bluetooth", and turn on the Bluetooth on your device.
4. Select "Bluetooth Keyboard" on your Samsung Tablet bluetooth interface, and click "Pair", connection finished.
5. Your Samsung Tablet will connect automatically next time after first successful connection.

Caution

1. In order to extend the service life, it is suggested to turn the keyboard off when there is no interactive for a long time.
2. It is suggested to recharge the keyboard only when the [Power] indicator light starts blinking. It is better to charge for not less than 3 hours every time charging the keyboard.