Wolf Integrated Cooktop Wiring Diagrams
This document contains wiring diagrams for various Wolf Integrated Cooktop models.
Wiring Diagram IG15
Components: Cover Accessory Connector, Element Connector, Control Board, Transformer Board, Triac 1, Triac 2.
Connections:
- Cover Accessory Connector: Black, White, Red, Green wires.
- Element Connector: 1-2 Rear (Black, White, Red, Green), 3-4 Front (Purple, Orange, Green).
- Transformer Board: Connected to P1, P2, P10.
- Control Board: Connections labeled P3, P5, E1-E8.
- Triac 1 & Triac 2: Connected with Blue, Black, Red, Yellow wires.
Diagram Description: Shows the electrical flow from the power cord through the transformer and control board to the heating elements via triacs.
Wiring Diagram IS15
Components: Cover Accessory Connector, Transformer Board, Control Board, Heating Element, Thermal Switch, Drain Valve Connector, Triac 1.
Connections:
- Cover Accessory Connector: Black, White, Red, Green wires.
- Transformer Board: Connected to P1, P2, P7, P8.
- Control Board: Connections labeled P3, P5, E1-E8.
- Heating Element & Thermal Switch: Connected via Orange and Yellow wires.
- Drain Valve Connector: Black, Red wires.
- Triac 1: Connected with Blue, Black, Red wires.
Diagram Description: Illustrates the wiring for the IS15 model, including RTD sensors, a heating element, thermal switch, and triac control.
Wiring Diagram IF15
Components: Cover Accessory Connector, Transformer Board, Control Board, Heating Element, Thermal Switch, Triac 1.
Connections:
- Cover Accessory Connector: Black, White, Red, Green wires.
- Transformer Board: Connected to P1, P2, P6, P7, P8.
- Control Board: Connections labeled P3, P5, E1-E8.
- Heating Element & Thermal Switch: Connected via Orange and Yellow wires.
- Triac 1: Connected with Blue, Black, Red wires.
Diagram Description: Shows the wiring for the IF15 model, similar to IS15 but with specific connection points.
Wiring Diagram IM15 & IM15-2
Components: Spark Module, Solenoid, 3 Conductor Power Cord.
Connections:
- Spark Module: Connected via White and Red wires.
- Solenoid: Connected via Red and White wires.
- Power Cord: White, Black, Green (Ground) wires.
Diagram Description: Details the ignition system wiring for IM15 and IM15-2 models, including the spark module and solenoid.
Wiring Diagram ICBIM15
Components: DSI (Direct Spark Ignition), Gas Valve, Power Cord.
Connections:
- DSI: Connections labeled 10, 7, 4, 3, 2, GRN/YEL.
- Gas Valve: Connected via E, White, Black wires.
- Power Cord: GRN/YEL, White, Black wires.
Diagram Description: Illustrates the wiring for the ICBIM15 model, focusing on the DSI and gas valve connections.
Wiring Diagram IM15 Starting With Serial # 16000000
Components: Spark Module, Solenoid, 3 Conductor Power Cord.
Connections:
- Spark Module: Connected via White and Red wires.
- Solenoid: Connected via Red and White wires.
- Power Cord: White, Black, Green (Ground) wires.
- Control Board Connections: L1, N.
Diagram Description: Shows updated wiring for IM15 models starting with serial number 16000000, including solenoid and spark module connections.
