Blaze Light Box 3008 - Wall Mounted SEG Display System
Product Overview
The Blaze Wall Mounted Light Box 3008 is a 30-foot wide by 8-foot high illuminated display system featuring a durable 4-inch aluminum frame available in Silver, White, or Black. Integrated perimeter LED light bars provide a uniform glow, eliminating the need for external power supplies and simplifying cord management. The system is designed for easy assembly and graphic installation.
Graphic Material Options
Two backlit graphic material options are available:
- Backlit Textile: A tightly woven, slightly stretchy, foldable, and washable fabric ideal for multiple uses.
- Intensity: A material with a smooth, coated finish, printed using a double-strike process for vibrant graphics.
Refer to graphic templates for specific size requirements.
Features and Benefits
- Dimensions: 30'W x 8'H
- Frame: Sleek, 4-inch aluminum construction
- Frame Colors: Available in White, Black, or Silver
- Lighting: Integrated perimeter LED light bars with internal power supply
- Assembly: Easy to assemble with included hanging hardware
- Compliance: UL Certified & ADA compliant sizing, approved for public spaces
- LED Warranty: 5-year warranty on lights
- Lifespan: 43,800 hours for LED lights (equivalent to 5 years if powered 24/7)
- Frame Warranty: Lifetime warranty on the frame
Specifications
Dimensions & Weight
| Category | Details |
|---|---|
| Hardware Assembled Unit | 360" W x 96" H x 4" D (9144mm x 2438.4mm x 101.6mm) |
| Approximate Weight (Hardware) | 250 lbs / 113.398 kg |
| Packing Case(s) | 5 Boxes |
| Shipping Dimensions | 4 x BOXES (79" L x 9" H x 11" D / 2006.6mm x 228.6mm x 279.4mm) 1 x BOX (24" L x 14" H x 8" D / 609.6mm x 355.6mm x 203.2mm) |
| Approximate Shipping Weight | 289 lbs / 131.088 kg |
Additional Information
Powder Coat Color Options
Available in White, Black, and Silver.
[Image: Swatches showing white, black, and silver powder coat color options, alongside the UL Certified logo.]
Tools Required
- Multi Hex Key (Included)
- Phillips Screw Driver (Not Included)
Assembly Instructions
The assembly process involves mounting brackets, assembling the frame, and hanging the unit.
- Mount top brackets to wall studs.
- Assemble the frame on the floor and attach the graphic liner to the back.
- Hang the assembled frame on the top brackets.
- Mount bottom wall brackets to the wall and secure the frame.
[Diagram: Exploded view of the Blaze Light Box frame components, showing various extrusions, connectors, and brackets labeled with numbers corresponding to the parts list. Also shows wall mounting brackets.]
Parts List
| QTY | DESCRIPTION |
|---|---|
| 2 | 8FT POWER CORD FOR LED-EV LIGHTS |
| 4 | CB10 90 DEGREE CONNECTOR |
| 17 | JOINER BAR (OLD STYLE) |
| 1 | 1524MM (60.00in) LENGTH OF 347 EXTRUSION-WITH MITRE CUT LEFT END FOR CB10-IB2 LOCK HOLE RIGHT END-WITH GROMMET HOLE 250MM FROM LEFT END |
| 2 | 1524MM (60.00in) LENGTH OF 347 EXTRUSION-WITH MITRE CUT RIGHT END FOR CB10-IB2 LOCK HOLE LEFT END |
| 10 | 1203MM LENGTH OF PH EXTRUSION-WITH IB2 LOCK HOLES ONE SIDE-CAM LOCK ONE SIDE |
| 1 | 1524MM (60.00in) LENGTH OF 347 EXTRUSION-WITH MITRE CUT LEFT END FOR CB10-IB2 LOCK HOLE RIGHT END |
| 2 | 1219MM (47.99in) LENGTH OF 347 EXTRUSION-WITH MITRE CUT LEFT END FOR CB10-IB2 LOCK HOLE RIGHT END |
| 2 | 1219MM (47.99in) LENGTH OF 347 EXTRUSION-WITH MITRE CUT RIGHT END FOR CB10-IB2 LOCK HOLE LEFT END |
| 8 | 1524MM (60.00in) LENGTH OF 347 EXTRUSION-WITH IB2 LOCK HOLES BOTH ENDS |
| 6 | BLAZE LIGHTBOX WALL BRACKETS (2-BRACKETS, 4-SCREWS, 4-ANCHORS) |
| 20 | 19" LED AC LIGHT BAR 6000 K |
| 24 | 10" LED AC LIGHT BAR 6000 K |
LED Lights
Note: A maximum of 20 LED fixtures can be connected in a line.
[Diagram: Layout of LED lights within the Blaze Light Box frame. Arrows indicate connecting LED light bars "End to End". Close-up views show corner connections and how the power cable feeds through a grommet hole using a Y-CONNECTOR. A prominent warning is displayed: "** DO NOT CONNECT LIGHTS ** AT CENTER".]
Graphic Application and Removal
Installation
Installation and removal of SEG (Silicone Edge Graphic) graphics is designed to be easy.
To Install:
- Push the SEG bead into each corner of the frame (visualized as steps 1-4).
- Push the SEG bead into the middle of the frame run (visualized as steps 5-8).
- Work your way around the perimeter of the frame, ensuring all beading is pushed in properly.
- If necessary, go around the perimeter again to ensure the beading is secure in the extrusion profile.
[Diagram: Illustration of SEG graphic installation. Top image shows a frame corner with numbered arrows (1-4) pointing to where the graphic's silicone edge (bead) is pushed into the frame channel. Bottom image shows the graphic being pressed along the frame edge (steps 5-8). A separate diagram shows multiple arrows pushing down on the entire graphic surface, indicating final seating.]
Note: Keep the setup area clean by using a drop cloth, washing hands before setup, or wearing gloves.
Removal
Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
[Diagram: Close-up of a graphic corner showing a pull tab and an arrow indicating to gently pull the graphic out of the frame.]
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip-lock/sealable plastic bag.
- Spot Cleaning: Wipe with a damp white cloth.
- Washing: If washing is necessary, use a commercial-size front-loading washing machine on a gentle cycle with cool water.
- Drying: Line dry flat.
Dry cleaning is NOT recommended to prevent shrinkage.
Resources
Refer to related graphic templates for more information:
The Exhibitors' Handbook
