Square D Pumptrol Water Pump Switch
Model: 9013FS
Model Number: 9013FSG2J21M1
Product Overview
This document provides detailed specifications for the Square D Pumptrol, water pump switch, model 9013FS, featuring adjustable differential and a setting range of 30-50 PSI.
Product Availability: Stock - Normally stocked in distribution facility
Price*: 25.40 USD
* Price is "List Price" and may be subject to a trade discount - check with your local distributor or retailer for actual price.
Specifications
Main Specifications
| Range of Product | Square D Pumptrol |
|---|---|
| Pressure Sensor Name | 9013FS |
| Pressure Sensor Size | 65 psi (448.16 kPa) 5...45 psi (34.47...310.26 kPa) |
| Value of Setting | 30...50 psi |
| Electrical Circuit Type | Power circuit |
| Product Specific Application | Control electrically driven water pumps |
| Quantity per Set | 1 |
| Type of Packing | Individual |
Complementary Specifications
| Pressure Sensor Type | Electromechanical pressure switch |
|---|---|
| Controlled Fluid | Fresh water |
| Temperature Range (Controlled Fluid) | -22...257 °F (-30...125 °C) |
| Adjustable Range on Rising Pressure | 20...65 psi (137.90...448.16 kPa) |
| Approximate Adjustable Differential | 15...30 psi (103.42...206.84 kPa) |
| Destruction Pressure | 220 psi (1516.85 kPa) |
| Pressure Actuator | Diaphragm |
| Pressure Switch Type of Operation | Regulation between 2 thresholds |
| Scale Type | Adjustable differential |
| Setting | Internal |
| Local Display | Without |
| Contacts Type and Composition | 2 NC, snap action, DPST-DB, Form YY |
| Cable Entry Number | 2 x 0.88 in (22.35 mm) cable entries with 0.84 in across flats UL 508 |
| Electrical Connection | Screw-clamp terminals 10 AWG, Screw-clamp terminals 5.261 mm² |
| Fluid Connection Type | 0.25 inch NPSF internal UL 508 |
| Short-Circuit Protection | 20 A cartridge fuse gG |
| Materials in Contact with Fluid | Zinc plated steel or equivalent flange, Nitrile (Buna-N) or equivalent rubber diaphragm |
Technical Details
| Material (Cover) | Polypropylene Cover, Noryl thermoplastic resin or equivalent Cover |
|---|---|
| Operating Position | Any position |
| Motor Power kW | 1.5 kW (2 hp) 230 V AC, 1 phase 1.1 kW (1.5 hp) 115 V AC, 1 phase 1.5 kW (2 hp) 115 V AC, 3 phase 2.2 kW (3 hp) 230 V AC, 3 phase 0.75 kW (1 hp) 460 V AC, 3 phase 0.75 kW (1 hp) 575 V AC, 3 phase |
| Electrical Durability | 100000 cycles (10 cyc/mn) |
| Mechanical Durability | 300000 cycles |
| Terminal Block Type | 4 terminals |
| Maximum Operating Rate | 10 cyc/mn |
| [Ui] Rated Insulation Voltage | 575 V UL 508 |
| Net Weight | 1 lb(US) (0.45 kg) |
| Repeat Accuracy | +/- 3 % |
| Terminals Description ISO n°1 | L1-T1, L2-T2 |
| Width | 3.1 in (78.74 mm) |
| Height | 2.8 in (71.12 mm) |
| Depth | 3.76 in (95.50 mm) |
| Factory Modification | Maintained manual cut-out lever (AUTO-OFF) |
Environment
| Standards | CE, NSF ANSI 61 Annex G, UL 508 |
|---|---|
| Ambient Air Temperature for Operation | -33...257 °F (-36...125 °C) |
| Ambient Air Temperature for Storage | -33...257 °F (-36...125 °C) |
| Protective Treatment | None |
| NEMA Degree of Protection | NEMA 1 UL 50 |
| IP Degree of Protection | IP20 conforming to IEC 60529 |
| Product Certifications | CSA file LR25490, UL listed file E12158 |
Ordering and Shipping Details
| Category | 21534-9013 FSG, FYG (INDIVIDUAL - CP7I) |
|---|---|
| Discount Schedule | CP7I |
| GTIN | 785901209515 |
| Returnability | Yes |
| Country of Origin | MX |
Packing Units
Package 1
| Unit Type | PCE |
|---|---|
| Number of Units | 1 |
| Package Height | 10.16 in (25.806 cm) |
| Package Width | 4.00 in (10.16 cm) |
| Package Length | 25.81 in (65.548 cm) |
| Package Weight | 13.28 oz (376.482 g) |
Package 2
| Unit Type | CAR |
|---|---|
| Number of Units | 40 |
| Package Height | 8.40 in (21.336 cm) |
| Package Width | 15.60 in (39.624 cm) |
| Package Length | 20.60 in (52.324 cm) |
| Package Weight | 37.71 lb(US) (17.105 kg) |
Package 3
| Unit Type | PAL |
|---|---|
| Number of Units | 800 |
| Package Height | 40.00 in (101.6 cm) |
| Package Width | 40.00 in (101.6 cm) |
| Package Length | 48.00 in (121.92 cm) |
| Package Weight | 755.00 lb(US) (342.462 kg) |
Offer Sustainability
California Proposition 65: WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope) - EU RoHS Declaration
Mercury free: Yes
RoHS exemption information: Yes
Environmental Disclosure: Product Environmental Profile
Circularity Profile: End of Life Information
Contractual Warranty
Warranty: 18 months
Dimensions
The following diagram illustrates the physical dimensions of the Type F unit. Measurements are provided in inches and millimeters.
Diagram Description: A technical illustration shows a side and front view of the pressure switch. Key dimensions are labeled with numerical values and arrows indicating measurement points. A 15/16 Hex fitting and a 1/2-14 Straight Pipe Thread (Form T) connection are indicated. The 'A' dimension is a variable dependent on the switch type.
| Switch Type | A Dimension (in.) | A Dimension (mm) | ||
|---|---|---|---|---|
| FSG1, FYG1 | 1-1/32 | 26 | ||
| FHG2, 12, 22, 32, 42, 52, FRG2, FSG2, FYG2 | 29/32 | 23 | ||
| FHG3, 13, 33, FRG3, FSG3, FYG3 | 1-9/32 | 33 | ||
| FHG9, 19, 29, 39, 49, 59, FSG9, FYG9 | 1-3/32 | 28 | ||
ALL DIMENSIONS ARE APPROXIMATE. ALSO REFER TO TECHNICAL DRAWINGS AND DOCUMENTATION.
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Document Date: Nov 18, 2022
