AVANT X programmable multiband amplifier for terrestrial signals, with 32 digital programmable filters and output channelling selection

The AVANT X is a multi-input multiband amplifier designed for terrestrial individual or MDU (Multi Dwelling Unit) installations. It allows programming up to 32 digital filters on 4 LowVHF+HighVHF+UHF inputs (DTT).

This amplifier is equipped with 6 inputs: FM-4xLowVHF/HighVHF/UHF-CATV. It enables programmable amplification and balancing of different RF inputs. Additionally, it facilitates channelling selection (off-air or CATV) of the output signal, allowing the mixing of DTT signals with those from a CATV headend.

Programming the AVANT X is made easy and intuitive through the ASuite application, available for Android or Windows/Mac.

Product Information

Ref.	532182
Logical ref.	AVANTXAM-C
EAN13	8424450215258

Packaging Info

Box	1 pcs.

Physical Data

Net weight	841.00 g
Gross weight	1,120.00 g
Width	226.00 mm
Height	120.00 mm
Depth	53.00 mm
Main product weight	920.00 g

Highlights

Digital processing technology for terrestrial TV signals.
Up to 32 individually programmable filters for single channel digital filtering, including adjacent channels (1 to 4 channels).
Digital processing of channels allows for frequency shifting of output channels.
Digital processing optimized for analog signals.
Automatic signal adjustment (AGC) in each filter and manual output signal regulation.
UHF/HighVHF/LowVHF digital filters with high selectivity (30dB rejection @ 1MHz).
CATV signal input with extended frequency range: 54-1220MHz.
SAW filters (Surface Acoustic Wave) for LTE interference mitigation, offering superior selectivity and stability.
Compatible with ISDB-Tb, ATSC, DVB-T/T2, and NTSC standards.
TForce Technology ensures stable terrestrial signal levels adapted to their optimum value.
Allows storage and transfer of multiple setup configurations between AVANT X units.
Zamak chassis provides high RF shielding.
Light-weight and compact design with dimensions (8.85" x 4.72" x 2.16").
All inputs support UHF, HighVHF, and LowVHF signals.
Automatic balancing based on programmed output level and equalization slope.
High output power.
Output channelling selection: off-air or CATV.
Flexible allocation of filters to inputs without restrictions.
Powers pre-amplifiers or BOSS system.
LED indicators display unit and signal status.
Easy-to-replace power supply.

Discover Avant X: A new evolutionary stage

The Avant X is a full digital programmable single channel headend designed to achieve programmable amplification and balance of different RF input signals.

LowVHF+HighVHF+UHF inputs: Channels can be filtered and adjusted using up to 32 digital filters. Each filter can be tuned to any LowVHF+HighVHF+UHF channel, with a bandwidth covering 1 to 4 channels. The 32 filters are configurable based on the number of channels present on each input. Compatible with ISDB-Tb, ATSC, DVB-T/T2, and NTSC. Output level is programmable between 30-55dBmV, with an equalization slope of up to 8 dB at the output.
FM input: Can be enabled or disabled. If enabled, it is amplified and its output level is set 10 dB below the lowest-level UHF channel, considering the equalization slope.
CATV input: Features an extended frequency range (54-1220MHz) with programmable gain and slope (0-20dB).

Choose the desired programming mode...

Avant X offers flexible programming options:

App ASuite for PC/Mac or tablet/Android smartphone: Configuration is performed via USB connection (OTG cable included) in a user-friendly interface. Configurations can be defined and stored without being connected to the amplifier, for later retrieval during installation and adjustment.
Universal programmer (ref. 7234): Ensures backwards compatibility.

By pressing the READJUST button (short press), the unit readjusts to the stored configuration values. Manual fine-tuning can be performed to slightly correct the gain of the LowVHF/HighVHF/UHF filters after adjustment.

Technical specifications : Ref. 532182

Parameter	LowVHF	FM	HighVHF	UHF	CATV/Off-air
Number of inputs	6
Number of outputs	2
Output channelling	Programmable
Bands	LowVHF	FM	HighVHF	UHF	CATV/Off-air
Frequency range (MHz)	54...88	88...108	174...216	470...698	54...1218
Number of filters	75	30	75	32	40
Channels per filter	1	1...4	1	1...4	1...4
Gain (dB)	75	30	75	75	40
Gain adjustment range (dB)	AGC	AGC	AGC	AGC	10...45
Manual regulation after auto-adjustment (dB)	-3...3	-5...5	-3...3	-3...3	20
Slope regulation (dB)	-20...40	-20...40	-20...40	0...8	0...20
Input level (dBmV)	15...40	15...40	15...40	20...40	-20...-20
Output level DIN45004B (dBmV)	62	62	62	62	62
Output level EN50083 (dBmV)	66	66	66	66	66
Programmable output level (dBmV)	30...55	20...45	30...55	30...55	30...55
Noise figure (dB)	9	7	6	8	8
Selectivity (dB)	> 50	> 20	> 50	> 50	> 50
Powering per inputs (Vdc)	12	0	12	12	0
Max current input (mA)	70	0	70	70	0
Input voltage (Vac)	110 ... 230
Mains frequency	50 Hz / 60 Hz
Max. current (mA)	250
Max. power consumption (W)	14
Protection index (IP)	20
Operating temperature (°F)	23...113

	Televes AVANT 12 SAT Programmable Headend - Technical Specifications and Features Detailed information on the Televes AVANT 12 SAT programmable headend, including its technical specifications, features, and functionalities for terrestrial and satellite signal distribution. Learn about its 32 digital filters, ASuite programming via Bluetooth, and advanced signal processing.
	Televes AVANT X Basic Programmable Multiband Amplifier \| Technical Specifications Detailed specifications and features of the Televes AVANT X Basic programmable multiband amplifier for terrestrial TV signals, offering 32 digital filters, LTE protection, and versatile programming options.
	Televes AVANT 12 SAT Multiband Amplifier - Technical Specifications and Features Detailed information on the Televes AVANT 12 SAT programmable multiband amplifier, including its features, technical specifications, and programming capabilities via the ASuite application.
	Televes AVANT X Basic Programmable Multiband Amplifier \| Technical Specifications Detailed information on the Televes AVANT X Basic programmable multiband amplifier, featuring 32 digital filters, ASuite programming, and LTE signal compatibility for terrestrial TV installations.
	Televes AVANT 12 Programmable Multiband Amplifier Televes AVANT 12 is a programmable multiband amplifier for terrestrial installations, featuring 32 digital filters and Bluetooth® programming via the ASuite application. It offers advanced channel programming, autoadjustment, and 4G/5G filtering.
	Televes Avant X Programmable Head-End Amplifier: User Guide, Specs, and Installation Detailed user guide for the Televes Avant X programmable head-end amplifier (models 532180, 532181, 532182). Covers installation, configuration, technical specifications, safety, and application details.
	Televes AVANT 12 SAT Multiband Amplifier: Features and Specifications Detailed information on the Televes AVANT 12 SAT programmable multiband terrestrial/satellite amplifier, featuring 32 digital filters, advanced programming via ASuite (Bluetooth®), and technical specifications.
	Televes AVANT 12 SAT Programmable Multiband Amplifier Televes AVANT 12 SAT is a programmable multiband amplifier for terrestrial and satellite signals. It features 32 digital filters, Bluetooth connectivity for programming via the ASuite app, and advanced functionalities for signal management and distribution.