UltraPro Smart Wall Dimmer Installation Guide and Specifications

Model Numbers: 78002, 78003

Product Overview

This document provides installation instructions and technical specifications for the UltraPro Smart Wall Dimmer. It is designed to offer intelligent lighting control for your home.

Thank you for your purchase.

Safety and Compliance Information

Radiation Exposure Statement:

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.

Wiring Diagrams and Installation Instructions

Single-Pole Wiring

This configuration is used when controlling a light fixture from a single location.

Diagram shows a power source (Line, Neutral, Ground) connected to a dimmer switch. The Line wire connects to one terminal of the dimmer. The Load wire connects to another terminal of the dimmer and then to the light fixture. The Neutral wire from the power source connects directly to the light fixture's neutral terminal. The Ground wire connects to the dimmer's ground terminal and the fixture's ground terminal.

3-Way Wiring

This configuration allows control of a light fixture from two different locations.

Diagram shows a power source connected to the Line terminal of the first dimmer switch. Two "Traveler" wires connect between the first dimmer's traveler terminal and the second dimmer's traveler terminal. The Load wire from the second dimmer's load terminal connects to the light fixture. The Neutral wire connects to both dimmers and the fixture. The Ground wire connects to all components.

4-Way Wiring

This configuration allows control of a light fixture from three or more locations.

Diagram shows a power source connected to the Line terminal of the first switch (which can be a dimmer or a remote switch). Two sets of "Traveler" wires connect between the first switch and a second switch (e.g., a 4-way switch). These travelers then connect to the third switch (e.g., another 4-way switch), and finally to the dimmer switch. The Load wire from the dimmer switch connects to the light fixture. Neutral and Ground wires connect to all components.

Standard 3-Way/4-Way Wiring Hybrid

This section details specific wiring scenarios for 3-way and 4-way installations, often involving a primary dimmer and remote switches.

Diagrams illustrate connections for various combinations of smart dimmers and remote companion switches in 3-way and 4-way setups. Key connections include Line, Load, Travelers, Neutral, and Ground. Specific terminal labels (e.g., L, L1, L2, N, G) are shown for clarity.

Troubleshooting Indicators

The manual includes visual indicators to help diagnose wiring issues:

? (Happy face): Indicates correct wiring.
? (Worried face): Indicates potential wiring error.
? (Sad face): Indicates incorrect wiring.

Specifications

Feature	Specification
Model Numbers	78002, 78003
Power Requirements	120VAC, 60Hz
Load Type Compatibility	Incandescent, Halogen, LED, CFL
Maximum Load	500W Incandescent/Halogen, 150W LED/CFL
Wireless Protocol	Z-Wave Plus
Operating Temperature	0°C to 40°C (32°F to 104°F)
Certifications	FCC, IC

Product Characteristics

Front View

The front of the dimmer features a paddle for manual control and an LED indicator light.

Rear View / Internal Components

The rear of the dimmer includes screw terminals for wire connections: Line, Load, Traveler (for 3-way/4-way), Neutral, and Ground.

Warranty Information

Details regarding the product warranty are provided, typically covering manufacturing defects.

FCC/IC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC/IC Radiation Exposure Statement:

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

	UltraPro ZWA3016 In-Wall Smart Dimmer - Z-Wave Installation and User Guide Comprehensive guide for the UltraPro ZWA3016 Z-Wave certified in-wall smart dimmer. Includes installation instructions for single-pole and 3-way setups, Z-Wave network integration, features, specifications, and troubleshooting.
	UltraPro Z-Wave In-Wall Smart Dimmer Installation and Operation Guide Comprehensive guide for installing and operating the UltraPro Z-Wave In-Wall Smart Dimmer, including features, wiring instructions, Z-Wave network connection, and troubleshooting.
	UltraPro Z-Wave In-Wall Smart Switch Installation Guide This guide provides detailed instructions for installing and using the UltraPro Z-Wave In-Wall Smart Switch (model ZW4009/39354). Learn about its features, wiring, setup, specifications, and Z-Wave integration for smart home automation.
	UltraPro Z-Wave Plus In-Wall Smart Switch Installation Guide This guide provides instructions for installing and using the UltraPro Z-Wave Plus In-Wall Smart Switch (model ZWN4017). It covers wiring diagrams, features, specifications, and troubleshooting.
	UltraPro In-Wall Smart Switch Z-Wave Conformance Statement This document outlines the Z-Wave protocol implementation conformance statement for the UltraPro In-Wall Smart Switch, detailing its product features, Z-Wave information, and supported command classes.
	UltraPro Z-Wave In-Wall Smart Switch Installation Guide Comprehensive guide for installing and operating the UltraPro Z-Wave In-Wall Smart Switch (ZW4008), including wiring instructions, features, specifications, and Z-Wave network integration.
	UltraPro In-Wall Smart Switch Z-Wave Conformance Statement This document provides the Z-Wave Protocol Implementation Conformance Statement for the UltraPro In-Wall Smart Switch, detailing its product features, Z-Wave information, and supported command classes.
	UltraPro In-Wall Smart Toggle Switch Z-Wave Conformance Statement Technical conformance statement for the UltraPro In-Wall Smart Toggle Switch, detailing its Z-Wave features, specifications, and command class support.