Schneider Electric Modicon X80 BMXDDI1603H Discrete Input Module
Product Data Sheet
Specifications
Product Name: discrete input module X80 - 16 inputs - 48V DC current sink (logic positive) - severe
Product Reference: BMXDDI1603H
Product Availability: Non-Stock - Not normally stocked in distribution facility
Main
| Range of Product | Modicon X80 |
|---|---|
| Product or Component Type | Discrete input module |
| Product Specific Application | For severe environments |
| Discrete input number | 16 |
| Discrete input type | Isolated |
| Input type | Current sink (logic positive) |
| Discrete input voltage | 48 V DC positive |
| Discrete input current | 2.5 mA |
Complementary
| Input compatibility | With 2-wire/3-wire proximity sensors IEC 60947-5-2 With 2-wire/3-wire proximity sensors IEC 61131-2 Type 1 |
|---|---|
| Sensor power supply | 36...60 V @ 140 °F (60 °C) 42.2...52.8 V @ 158 °F (70 °C) |
| Current state 1 guaranteed | >= 2 mA |
| Current state 0 guaranteed | <= 0.5 mA |
| Input impedance | 19200 Ohm |
| Insulation resistance | > 10 MOhm @ 500 V DC |
| Power dissipation in W | 3.6 W |
| DC typical response time | 4 ms |
| DC maximum response time | 7 ms |
| Paralleling of inputs | Yes |
| Typical current consumption | 76 mA @ 3.3 V DC |
| MTBF reliability | 777000 H |
| Protection type | 1 external fuse per group of channel 0.5 A fast blow Reverse polarity protection |
| Voltage detection threshold | < 24 V DC sensor fault > 36 V DC sensor OK |
| Status LED | 1 LED (Green) module operating (RUN) 1 LED per channel (Green) channel diagnostic 1 LED (Red) module error (ERR) 1 LED (Red) module I/O |
| Product Weight | 0.254 lb(US) (0.115 kg) |
Environment
| IP Degree of Protection | IP20 |
|---|---|
| Directives | 2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility |
| Environmental characteristic | Gas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2 |
| Dielectric strength | 1500 V AC 50/60 Hz 1 minute, primary/secondary |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Ambient Air Temperature for Storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | -13...158 °F (-25...70 °C) |
| Relative humidity | 5...95% @ 131 °F (55 °C) without condensation |
| Protective treatment | Conformal coating |
| Operating altitude | 0...6561.68 ft (0...2000 m) 2000...5000 m with derating factor |
Ordering and Shipping Details
| Category | US1PC3418160 |
|---|---|
| Discount Schedule | PC34 |
| GTIN | 3595864025728 |
| Returnability | No |
| Country of origin | US |
Packing Units
Unit Type of Package 1: PCE
| Number of Units in Package 1 | 1 |
|---|---|
| Package 1 Height | 1.97 in (5.000 cm) |
| Package 1 Width | 4.33 in (11.000 cm) |
| Package 1 Length | 4.72 in (12.000 cm) |
| Package 1 Weight | 5.785 oz (164.000 g) |
Unit Type of Package 2: S02
| Number of Units in Package 2 | 15 |
|---|---|
| Package 2 Height | 5.91 in (15.000 cm) |
| Package 2 Width | 11.81 in (30.000 cm) |
| Package 2 Length | 15.75 in (40.000 cm) |
| Package 2 Weight | 6.146 lb(US) (2.788 kg) |
Contractual Warranty
| Warranty | 18 months |
|---|
Dimensions Drawings
Modules Mounted on Racks
Dimensions
mm
150 (2)
5.90 (2)
140 (1)
5.51 (1)
in.
150 (1)
5.90 (1)
160 (2)
6.29 (2)
Diagram showing the module dimensions with labels for different connection types.
(1) With removable terminal block (cage, screw or spring).
(2) With FCN connector.
(3) On AM1 ED rail: 35 mm wide, 15 mm deep. Only possible with BMXXBP0400/0400H/0600/0600H/0800/0800H rack.
Rack references
| Rack references | a in mm | a in in. |
|---|---|---|
| BMXXBP0400 and BMXXBP0400H | 242.4 | 9.54 |
| BMXXBP0600 and BMXXBP0600H | 307.6 | 12.11 |
| BMXXBP0800 and BMXXBP0800H | 372.8 | 14.68 |
| BMXXBP1200 and BMXXBP1200H | 503.2 | 19.81 |
Connections and Schema
Connecting the Module
Input Circuit Diagram
Diagram showing a single input circuit with a fuse, sensor, module, and voltage monitoring.
Module Connection
Diagram showing the terminal connections for the BMXDDI1603H module, including input channels (1-16), 0 VDC, +48 VDC, and fuse.
Status LEDs: RUN (Green), ERR (Red), Channel Diagnostic (Green per channel), I/O (Red per module).
Power supply: 48 VDC
Fuse: Fast blow fuse of 0.5 A
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via its ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
Environmental footprint:
- Carbon footprint (kg CO2 eq, Total Life cycle): 33
- Environmental Disclosure: Product Environmental Profile
Materials and Substances
| Packaging made with recycled cardboard | Yes |
|---|---|
| Packaging without single use plastic | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| SCIP Number | 43b0fbab-d94b-43e8-be0a-0b39cadd288b |
| REACH Regulation | REACH Declaration |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Use Again
| Repack and remanufacture | Circularity Profile |
|---|---|
| Take-back | No |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Product Images
Image of the side and front of the BMXDDI1603H module.
Image showing alternate views of the BMXDDI1603H module, including connection terminals and labeling.
Image showing the top and side views of the BMXDDI1603H module.
Image showing the front and side views of the BMXDDI1603H module with labeling.
