Introduction to Stryker VAV ZIO Controllers
The Honeywell Stryker VAV ZIO controllers are advanced system controllers designed for commercial building HVAC applications. These controllers offer state-of-the-art features and are configured using the NIAGARA FRAMEWORK® software. The Stryker VAV controllers support both LON VAV and BACnet VAV configurations, providing flexibility for various network environments.
This guide details the Stryker LON VAV controllers (CVL4022AS-VAV1 and CVL4024NS-VAV1) and Stryker BACnet VAV controllers (CVB4022AS-VAV1 and CVB4024NS-VAV1). It also covers the Zio® and Zio Plus LCD Wall Modules, which serve as user interfaces for these controllers, allowing for parameter adjustment and system balancing.
Key Features and Capabilities
Stryker VAV controllers are designed for pressure-independent, single duct VAV box control. They feature:
- Flexible, universal inputs for sensors and digital inputs.
- A combination of analog and digital outputs.
- Echelon® LONWORKS® network protocol support for LON VAV controllers.
- BACnet MS/TP network communication for BACnet VAV controllers.
- A Sylk™ bus for Sylk-enabled sensors.
- Built-in zone control functions and remote wall module interface.
- Pressure-independent or pressure-dependent VAV control options.
- Easy user access to air flow sensor inputs.
- Actuators designed for VAV box damper shafts.
- Removable terminal blocks for simplified installation and replacement.
The Zio/Zio Plus LCD Wall Modules offer:
- Access to and adjustment of controller parameters.
- System balancing capabilities.
- Customizable home screens displaying temperature, setpoint, and outdoor conditions.
- Password protection for tenant access and contractor mode.
For detailed specifications and installation instructions, refer to the documents listed in the tables within this guide.
