QUIKCELL ON BEAT MAX Portable Wireless Speaker

Specifications

• Driver Size: Two 52mm Dynamic Drivers
• Bluetooth Version: 5.0
• Speaker Materials: ABS/iron net/Silicone
• Weight: 25oz (702g)
• Battery Type: Lithium Ion
• Speaker Power: 10W x 2
• Charging Time (hours from empty): 4.5-5hrs
• Music Playtime (volume at 50%): 24hrs
• Talk Time (volume at 50%): 24hrs
• Frequency Response: 40Hz-20KHz
• Water resistant: IP67
• Wireless Connection Range: 33ft (10 meters)

What's Inside

The package contains the following items:

1. Wireless Speaker (Altavoz Inalámbrico)
2. Built-in Carrying Strap (Correa)
3. USB-C Charging Cable (Cable de Carga USB-C)
4. AUX Cable (Cable Auxiliar)
5. Carabiner Clip (Carabina)

Visual representation shows the speaker (1), USB-C cable (3), AUX cable (4), and carabiner clip (5).

Controls and Features

The speaker has several controls and features:

• 1. Power Button (⏻): Long press to power off/on.
• 2. [+] Button (➕): Long press to skip to next song; Short press to increase volume.
• 3. [-] Button (➖): Long press to skip to previous song; Short press to decrease volume.
• 4. [Play, Pause, Answer] Button (▶️⏸️): Short press to play/pause music & answer/end phone calls. Long press to pair with another smartphone, ignore/decline phone calls. Double press to redial last dialed number.
• 5. TWS Pairing Button: Short press to enter TWS pairing mode; Double press to exit TWS pairing mode; Long press (6 seconds) to clear device pairing history.
• 6. Microphone (?): For calls.
• 7. LED indicator light: Shows status.
• 8. USB-C charging port: For charging the speaker.
• 9. Reset Button: For resetting the device.
• 10. AUX port: For wired audio connection.

Charging Your Speaker

Step 1

Plug the USB-C tip of your charging cable into your speaker and the USB-A tip into a compatible port (such as a wall charger, car charger, or computer).

The LED indicator light is RED while charging and turns off when fully charged.

Allow your speaker to fully charge for 4.5-5 hours prior to first use.

Note: USB charger is not included. Requires at least a 5V/2A charger.

Visual shows the USB-C cable connecting to the speaker's charging port.

Pairing Your Device

Step 2

When you turn on your OnBeat Max for the first time, it will automatically enter pairing mode. The BLUE indicator light will flash. Search for "OnBeat Max" in your device's Bluetooth settings. When your device is paired, you will hear a connection tone.

If you would like to pair another device, you can do so in a couple of different ways:

Option 1: Turn off the Bluetooth for the device that is already connected. You will hear a tone indicating disconnection and see the BLUE indicator light flashing. You can now search for "OnBeat Max" in your other device's settings to connect.

Option 2: Long press the [Play, Pause, Answer] button (▶️⏸️) for 3 seconds until you hear the connection tone and see the BLUE indicator light flashing. You can now search for "OnBeat Max" in your other device's settings to connect.

Visuals show the speaker and a smartphone interface for Bluetooth pairing.

Using Your Speaker

Step 3

Use the POWER BUTTON (⏻) to turn your OnBeat Max ON/OFF.

Use the + (➕) and - (➖) buttons to adjust volume and skip songs.

Use the [Play, Pause, Answer] button (▶️⏸️) to control music and answer, end, or decline phone calls. Long press the [Play, Pause, Answer] button for 3 seconds to connect to another phone.

Your OnBeat Max will turn off after 5 minutes if a device is not connected, your device is out of range, or your Bluetooth is turned off.

Diagram highlights the Power Button on the speaker's control panel.

Pairing with Another OnBeat Max (TWS)

Step 4

To use the TWS (True Wireless Stereo) setting, ensure the other OnBeat Max is within range and that neither speaker is connected to a smartphone. Then, short press the TWS Button on each speaker to begin pairing.

When you see the indicator light flashing BLUE, followed by the connection tone, your speakers are paired. You may now pair them with your phone by selecting "OnBeat Max" in your Bluetooth settings.

When speakers are in TWS mode, all functions are linked. You only need to use controls on one of the speakers to control both.

Visuals show two speakers and the TWS button highlighted.

How Much Power Do I Have?

Step 5

You can check the battery percentage on your smartphone:

Apple iOS 14 and up: From your home screen, swipe left to go to your "Today View". Long press any existing widget, select "Edit Home Screen" to enter jiggle mode. Look for the ➕ in the top left corner to search for the battery widget. Choose the widget size (small, medium, or large). This will show the battery level of all connected devices.

Android Oreo (8.1) and up: In Settings, go to "Connections" > "Bluetooth". Tap on the word "Bluetooth" (not the switch) to see a complete list of all connected devices and their battery level.

Visuals show example battery level displays on Apple iOS and Android devices.

Additionally, when your OnBeat Max reaches 20% power, you will hear "Battery Low" every 2 minutes. If it reaches 5% power, it will turn off automatically.

Warranty and Compliance

ONE YEAR LIMITED WARRANTY

For warranty information, please visit quikcell.com/warranty.

© 2021 All rights reserved. Alpha Comm and Quikcell are registered trademarks of Alpha Comm Enterprises. Designed by Alpha Comm Enterprises at 1500 Lakes Parkway; Lawrenceville, GA 30043.

FCC Information:

Model: OnBeat Max / ONBEATMAX

FCC ID: 2AEZG-0261

Manufacturer: Alpha Comm Enterprises Inc.

Address: 1500 Lakes Parkway Lawrenceville GA 30043.

Phone: 1-888-951-0909

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.