Compliance proofs for products: LANCOM Systems GmbH
User Guide for LANCOM SYSTEMS models including: LANCOM GS-3510XP, Multi-Gigabit Ethernet Access Switch, LANCOM GS-3510XP Multi-Gigabit Ethernet Access Switch, Ethernet Access Switch, Access Switch
LANCOM GS-3510XP: LANCOM Systems GmbH
- LANCOM Systems GmbH
File Info : application/pdf, 1 Pages, 476.71KB
DocumentDocument111952/0622 LED description & technical details owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their Hardware Quick Reference LANCOM GS-3510XP Configuration interface (Console) Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring / monitoring the switch. TP Ethernet interfaces 10M/100M/1G Use Ethernet cables to connect the interfaces 1 to 4 to further network devices. TP Ethernet interfaces 100M/1G/2.5G Use Ethernet cables to connect the interfaces 5 to 8 to further network devices. SFP+ interfaces 10G Insert suitable LANCOM SFP modules into the SFP+ interfaces 9 to 10. Choose cables which are compatible with the SFP+ modules and connect them as described in the SFP+ module's documentation. Power connector (device back side) Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord. Warning! High touch current. Connect to earth before connecting the power supply. Mounting & connecting System / Link/Act/Speed / PoE System: off System: green System: red Link/Act/Speed: green PoE: green Device switched off Device operational Hardware error Port LEDs show link / activity status or port speed Port LEDs show PoE status Mode/Reset button Short press ~5 sec. pressed 7~12 sec. pressed Port LED mode switch Device restart Configuration reset and device restart TP Ethernet ports 10M/100M/1G LEDs switched to Link/Act/Speed mode Off Port inactive or disabled Green Link 1 Gbps Green, blinking Data transfer, link 1 Gbps Orange Link < 1 Gbps Orange, blinking Data transfer, link < 1 Gbps LEDs switched to PoE mode Off Port inactive or disabled Green Port enabled, power supply to connected device Orange Hardware error TP Ethernet ports 100M/1G/2.5G LEDs switched to Link/Act/Speed mode Off Port inactive or disabled Orange Link 100 Mbps Orange, blinking Data transfer, link 100 Mbps Green Link 1 Gbps / 2.5 Gbps Green, blinking Data transfer, link 1 Gbps / 2.5 Gbps LEDs switched to PoE mode Off Port inactive or disabled Green Port enabled, power supply to connected device Orange Hardware error Orange blinkend PoE-Überlastung SFP+ ports 10G LEDs switched to Link/Act/Speed mode Off Port inactive or disabled Green Link 1 Gbps Green, blinking Data transfer, link 1 Gbps Blue Link 10 Gbps Blue, blinking Data transfer, link 10 Gbps Hardware Power supply Internal power supply unit (110230 V, 5060 Hz) Power consumption Max. 165 W (thereof 130 W PoE budget) Environment Temperature range 040°C; short-term temperature range 050°C; humidity 1090%, non-condensing Housing Robust metal housing, 220 x 44 x 242 mm (W x H x D), network connectors on the front Number of fans Fanless Interfaces ETH 4 TP Ethernet ports 10 / 100 / 1000 Mbps 4 TP Ethernet ports 10 / 100 / 2500 Mbps 2 SFP+ ports 10 Gbps 10 concurrent Ethernet ports in total Package Content Documentation Mounting brackets Cable Quick Reference Guide (DE/EN), Installation Guide (DE/EN) Two 19" brackets for rackmounting 1 IEC power cord, 1 serial configuration cable 1.5 m and/or omissions. Cloud-ready Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times. Please observe the following when setting up the device i The power plug of the device must be freely accessible. For devices to be operated on the desktop, please attach the adhesive rubber footpads Do not rest any objects on top of the device Keep all ventilation slots on the side of the device clear of obstruction Mount the device into a 19" unit in a server cabinet using the provided screws and mounting brackets. Please note that support service for third-party accessories is excluded. Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc