About This Guide
This guide provides essential information for setting up and using your ResMed VPAP ST or VPAP S device. It covers device components, basic operation, and important maintenance procedures. For detailed instructions, please refer to the full Information Guides.
Getting Started
Follow these steps to begin your therapy:
- Ensure the power is connected.
- Adjust ramp time if needed for comfort.
- Fit your mask according to the mask user guide.
- Start therapy by breathing into the mask or pressing the Start/Stop button.
- Position yourself comfortably and ensure the air tubing allows free movement.
- To stop treatment, remove your mask or press the Start/Stop button.
Notes:
- SmartStart functionality, if enabled by your clinician, will automatically start and stop therapy based on your breathing.
- In case of power interruption, the device will automatically resume therapy once power is restored.
Key Features
- VPAP Device: The main unit delivering therapy.
- Air Tubing: Connects the device to the mask.
- Power Supply Unit: Provides power to the device.
- SD Card: Gathers therapy data and settings updates.
- Mask-Fit Feature: Helps ensure a proper mask seal for effective therapy.
- Ramp Time: Allows for a gradual increase in pressure at the start of therapy.
Maintenance
Regular cleaning and maintenance are crucial for optimal device performance:
- Daily: Clean the air tubing.
- Weekly: Wash the air tubing with mild detergent and water.
- Monthly: Wipe the exterior of the VPAP device with a damp cloth. Check and replace the air filter as needed (typically every six months).
Refer to the user guides for detailed cleaning instructions for masks and humidifiers.
Further Information
For troubleshooting and more detailed product information, please visit www.resmed.com.
