iHome iBT920 Color Changing Splashproof Boombox

Product Overview

This guide provides instructions for the iHome iBT920 Color Changing Splashproof Boombox.

Model: iBT920

Questions? Visit ihomeintl.com

Top Panel Controls

• Mode Button: Short press to switch modes (Bluetooth, FM, AUX, U disk, TF card). Long press for TWS function.
• Volume Button (-): Short press to decrease volume. Long press to play the previous song (music mode) or select the previous radio station (FM mode).
• Volume Button (+): Short press to increase volume. Long press to play the next song (music mode) or select the next radio station (FM mode).
• Light Button: Short press to turn on the light. Long press to turn off the light.
• Power On/Off Button: Long press for 2 seconds to power on/off.
• Play/Pause Button: Short press to play/pause. Long press to automatically search for channels (FM mode).
• Battery Indicator: Shows charging status (Red for charging, Green for fully charged).
• Bluetooth Indicator: Flashes blue when pairing, solid blue when connected.

Back Panel Connections

• AUX audio input: Plug in a wired microphone.
• U disk input: Insert U disk to play MP3 music (Max 64 GB).
• TF card input: Insert TF card to play MP3 music (Max 64 GB).
• Charging Port: Connect the USB-C charging cable.
• Charging Indicator: Located at the rear of the unit.

Charging the Speaker

• Charge the unit for approximately 5 hours before first use.
• Use the included USB-C charging cable and a USB AC adapter (not included).

Bluetooth Connection Operation

1. Turn on the unit and set it to Bluetooth mode. Ensure your device's Bluetooth is on.
2. Press and hold the Play button to enter pairing mode.
3. Select ‘iHome iBT920’ on your device to pair.

Recording Operation

1. Insert TF card or U disk and switch to Bluetooth mode.
2. Play music via Bluetooth.
3. Connect a wired microphone.
4. Short press the record button on the remote control to start recording. Short press again to finish.
5. Long press the Play button to play recorded files.
6. To delete recorded files, play the file and long press the Play button.

True Wireless Pairing (TWS)

Requires two iBT920 speakers.

1. Pair one iBT920 unit to your device via Bluetooth.
2. Power on the second iBT920 unit.
3. Press and hold the Mode button for 2 seconds on each unit.
4. The units will announce “Left Channel” and “Right Channel” when linked.
5. The speakers will automatically link TWS when powered on together in the future.
6. To remove TWS pairing, reset Bluetooth pairing by pressing and holding the Play button for 10 seconds on both units.

Remote Schematic Diagram and Operation Instructions

The remote control operates within a range of approximately 6 meters (20 feet) and 30 degrees from the device's receiving window. Aim the remote at the receiving window and ensure no obstacles are present. Avoid direct strong light exposure on the receiving window, which may cause malfunction. Replace batteries (2x AAA) when needed, and check them regularly.

• Volume Down: Short press for volume down, long press for previous song/station.
• Volume Up: Short press for volume up, long press for next song/station.
• Mode: Switches modes.
• Sound Effects: Adjusts sound effects.
• Microphone Volume Up/Down: Adjusts microphone volume.
• Remove Vocal: Removes vocals from music.
• LED Atmosphere Light: Controls the light effects.
• Play/Pause: Controls playback.
• Record Button: Starts/stops recording.
• Number Buttons (0-9): Select FM preset stations or tracks in TF card/USB mode.
• Repeat Function: Controls repeat mode.

Important Safety Instructions

• Install according to manufacturer's instructions, do not block ventilation openings.
• Keep away from heat sources like radiators or stoves.
• Use only manufacturer-specified attachments.
• Unplug during lightning storms or prolonged disuse.
• Service by qualified personnel if plug is damaged, objects/liquids spilled, unit exposed to rain, dropped, enclosure damaged, or performance changes significantly.
• Do not place naked flame sources (e.g., candles) on the product.
• Dispose of batteries responsibly; do not mix old and new batteries.
• Suitable for tropical and moderate climates.
• Do not dispose of batteries in household trash or fire.
• The mains plug of the power adapter is the disconnect device and should remain accessible.
• Clean with a damp cloth only; avoid harsh cleaning agents.
• Caution: Risk of explosion if battery is replaced with an incorrect type.
• If storing for over a month, charge the unit fully before storage. Use a UL/ETL certified adapter and the supplied USB cable.

FCC Information

This equipment complies with FCC RF radiation exposure limits for uncontrolled environments. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try to correct it by reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician.

ISED Information

This device complies with ISED RF exposure requirements and contains licence-exempt transmitters/receivers that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with IC RSS-102 radiation exposure limits for uncontrolled environments. CAN ICES-3 (B) / NMB-3(B).

Water Resistant Cap

Ensure the water resistant cap is completely covered before using the unit near water.

One Year Limited Warranty

SDI Technologies Inc. (SDI) warrants this product to be free from defects in workmanship and materials for a period of 90 days from the original purchase date. If the product fails to function satisfactorily, return it to the store of purchase. If service is required due to defect or malfunction during the warranty period, SDI will repair or replace the product at its discretion, subject to verification of the defect. Contact Customer Service at ihomeaudio.com/support/contact for a Return Authorization Number and shipping instructions. A sales receipt is required for warranty validation. This warranty is valid only if the product is used for its intended purpose and does not cover damage from negligence, misuse, accident, unauthorized repairs, cracked cabinets, excessive heat, or damage to digital media players, CDs, or cassettes. Shipping costs to and from the Factory Service Center are the owner's responsibility. This warranty is valid in the United States of America only and does not extend to owners other than the original purchaser. SDI and its affiliates are not liable for consequential or incidental damages, lost profits, or exemplary or punitive damages. Some states may have different warranty provisions.

© 2023 SDI Technologies, Inc. All rights reserved.

Visit www.ihome.com for questions.