Course Overview
Course Number: FDM-0001
Course Duration: 4 Days
Prerequisite Course(s): EXP-2001C3 or EXP-2001UOC
This course provides participants the ability to perform the following tasks:
- Build control networks using Field Device Manager
- Add new devices implementing vendor supplied DD Files and DTMs
- Modify parameters of HART Devices from the Experion Station
- Troubleshoot and Maintain HART and FF Devices
- Learn overview of FDM Express, which is a portable, on-the-go version of the Field Device Manager (FDM) for configuration and management of smart field instruments
- Build and execute Partial Valve Stroke Tests (PVST) for the supported Emergency Shut Down (ESD) valves
- Integrate FDM with Uniformance Asset Sentinel for asset synchronization, fault model creation and instrument diagnostic synchronization
Participants will build HART, FF networks, configure HART, FF devices, configure HART Multiplexers, view demo of modify parameters, utilize history functions, configure, and use Mux Monitoring solution and troubleshoot HART devices using Field Device Manager.
Course Objectives
- Describe Basics of the supported protocols, FDM fundamentals and topologies, and configuration of FDM Networks
- Configure and Modify HART, FF, and Mux devices using Field Device Manager
- Use of Experion Station interface with HART Device strategies
- Implementation of vendor DD Files and DTMs to implement changes to devices modified by device suppliers
- Troubleshooting HART devices using Diagnostics Methods
- Build and execute Partial Valve Stroke Tests (PVST) for the supported Emergency Shut Down (ESD) valves
- Software configuration
- Additional FDM features
- Configure and Implement Bulk Operations
- Use FDM Utilities and Plant Area View
- Integrate FDM with Uniformance Asset Sentinel
Course Delivery Options
- Asynchronous Training (AT)
- Self-paced with 10 days to complete
- Instructor-Led Training (ILT)
Course Languages
English
