FUJIFILM X100VI Limited Edition Accessory Attachment Guide

Introduction

This guide provides essential information for the FUJIFILM X100VI Limited Edition, detailing the included accessories and offering step-by-step instructions for their attachment. It covers the soft release shutter button and camera strap, ensuring users can properly equip their camera.

Included Accessories

For the FUJIFILM X100VI Limited Edition, the following accessories are supplied, as referenced in the Basic Manual (P viii):

• NP-W126S rechargeable battery
• USB cable (approx. 0.6 m/2 ft.)
• Lens cap (comes attached to camera)
• Protective covers (× 2)
• Shoulder strap
• Hot shoe cover
• Soft release shutter button

Attaching the Soft Release Shutter Button

1. Fix the bundled rubber ring into the concave part around the screw of the soft release shutter button. Note: The rubber ring may have been pre-installed.
2. Attach the screw of the soft release shutter button to the shutter button screw hole. Turn it clockwise while pressing lightly to secure it.

Attaching the Strap

1. Attach the protective cover to the camera.
2. Attach the strap clip to the strap eyelet. Repeat these steps for the second eyelet.