Cooler Master NR200P MAX Build Guide
Your comprehensive guide to assembling your PC with the Cooler Master NR200P MAX case.
Specifications
Case
| Dimension (L x W x H) | 377 x 185 x 292mm (14.84 x 7.28 x 11.50 inch) |
|---|---|
| Motherboard Support | Mini-ITX, Max. size: 170 x 180mm |
| Expansion Slots | 3 |
| Fan Support | Top: 2 x 120mm / 2 x 140mm Bottom: 1 x 120mm (max 15mm, with 3.5" HDD at the bottom) Bottom: 2 x 120mm (max 15mm, w/o 3.5" HDD at the bottom) |
| Liquid Cooling Support | Top: 240mm/280mm |
| CPU Cooler Clearance | 67mm / 2.74 inch |
| Power Supply Clearance | 130mm / 5.12 inch |
| Compatibility (maximum) | Graphics Card: L: 336mm / 13.23 inch, H: 160mm / 6.30 inch, W: 75mm / 2.95 inch |
| Power Supply Form Factor | SFX, SFX-L |
Watercooling
| Exterior Color | Black |
|---|---|
| CPU Socket Support | Intel: LGA 2066 / 2011-v3 / 2011 / 1200 / 1151 / 1150 / 1155 / 1156 / 1700 AMD: AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 |
| Radiator Dimensions (L x W x H) | 318 x140 x 27.2 mm (10.9 x 4.7 x 1.1 inch) |
| Pump Dimensions (L x W x H) | 79.9 x 76 x 48 mm (3.15 x 3 x 1.9 inch) |
| Pump MTTF (Hours) | 70,000 hours |
| Pump Noise Level (dBA) | <10dBA |
| TDP (W) | 230 |
Power Supply
| Form Factor | SFX |
|---|---|
| Fan Type | 92mm FDB Fan |
| Efficiency | 90% |
| Operating Temperature | 0~50°C |
| Protections | OVP / OPP / SCP / OCP / UVP / OTP / Surge and Inrush Protection |
| Regulatory | TUV, cTUVus, CE, BSMI, FCC, CCC, EAC, RCM, KCC, CB |
| Connectors | ATX 24 Pin x1, EPS 4+4 Pin x1, PCI-e 6+2 Pin x2, SATA x2, Peripheral 4 Pin x1 |
| AC INPUT | 100-240V~, 12-6A, 50-60Hz |
| DC OUTPUT | +5V: 20A, +3.3V: 20A, +12V: 70.8A, -12V: 0.3A, +5VSB: 3A |
| TOTAL POWER | 850W |
Fans
| Dimensions (L x W x H) | 140 x 140 x 25mm / 5.5 x 5.5 x 1 inch |
|---|---|
| LED Type | Non-LED |
| Speed (RPM) | 650~1400RPM ± 5% |
| Airflow (CFM) | 67 CFM (Max) |
| Noise Level (dBA) | 10~27 dBA |
| Pressure (mm H2O) | 2.25 mm H2O (Max) |
| Life Expectancy (Hours) | 160,000 hours |
| Connector | 4-Pin |
| Rated Voltage (VDC) | 12 |
| Rated Current (A) | 0.15A |
| Included Splitter Cable | 2to1 4pin PWM splitter |
Accessory Box
Case Accessories
- A: x1
- B: x10
- C: x4
- D: x8
- E: x12
- F: x8
- G: x1
Cooling Accessories
- A: 115X/1200 x1
- B: 1700 x1
- C: x2
- D: x2
- E: x1
- F: x4
- G: x4
- H: x4
- I: x4
PSU Accessories
- A: x1
- B: x1
- C: x1
Installation Guide
Step 1: Remove Panels
To begin assembly, remove the side panels and the bottom panel from the case. The side panels are typically attached via clips or screws and can be slid or pulled off. The bottom panel usually detaches after removing specific screws.
Diagram Description: View 1 shows the case from the side. Arrows indicate pulling the side panels outwards. View 2 shows the case from the bottom/side. An arrow indicates unscrewing the bottom panel (with a [screwdriver] icon next to the screw), and then another arrow shows the panel being removed.
Step 2: Install Motherboard
Mount the motherboard into the case. Connect the necessary power cables, including the 4+4 Pin CPU Power connector. Also, connect front panel headers like Audio, USB 3.2 Gen 1/3.0, and the Fpanel (power switch, LEDs, etc.) to their respective headers on the motherboard.
Diagram Description: Shows a motherboard being placed into the case. Callouts indicate connections for "4+4 Pin CPU Power", "Audio", "USB 3.2 gen 1/3.0", and "Fpanel".
Step 3: Install CPU Block
This section details installing the CPU cooler block onto the CPU socket. Ensure you have the correct mounting hardware for your specific CPU socket type (Intel or AMD).
3.1 Intel CPU Block Installation
Follow the specific instructions for Intel sockets LGA 2066/2011-v3/2011, LGA 115X/1200, and LGA 1700. This typically involves attaching a backplate or mounting bracket to the motherboard, applying thermal paste to the CPU, and then securing the CPU block with screws.
Diagram Description: Shows Intel mounting brackets being attached to the CPU block or motherboard. The CPU block is then mounted onto the CPU, and secured with screws using a specific tightening pattern (e.g., 1, 2, 3, 4), indicated by a [screwdriver] icon.
3.2 AMD CPU Block Installation
Follow the instructions for AMD sockets like AM4/AM3+/AM3/AM2+/FM2+/FM2/FM1. This usually involves using the stock AMD mounting mechanism or provided brackets to secure the CPU block.
Diagram Description: Shows AMD mounting brackets being attached to the CPU block or motherboard and secured with screws.
Step 4: Install 2.5" & 3.5" Drives
Install your storage devices, such as 2.5" SSDs and 3.5" HDDs, into the designated drive bays or mounting points within the case. Use the provided screws for secure mounting.
Diagram Description: Shows 2.5" SSD and 3.5" HDD installation. Each drive is shown being mounted with screws (indicated by a [screwdriver] icon). Subsequent diagrams show these drives being installed into specific locations within the case chassis or on a mounting tray.
Step 5: Install GPU Bracket and GPU
Install the GPU bracket into the expansion slots of the case. Then, carefully insert your graphics card into the primary PCIe slot on the motherboard and secure it to the case bracket. Ensure sufficient clearance for the GPU, noting the maximum supported lengths (e.g., 336mm) and width/height constraints.
Diagram Description: Shows the GPU bracket being attached to the case, secured with screws (indicated by [screwdriver] icons). Then, a graphics card is shown being inserted into the motherboard's PCIe slot and connected to power. Another view shows the GPU installed within the case, with dimensions indicating clearance (150mm and 336mm).
Step 6: Re-install Panels
Once all components are installed and connected, re-attach the side panels and the bottom panel to complete the build.
Diagram Description: Shows the reverse of Step 1, with panels being slid or clipped back into place.
Warranty Information
Cooler Master provides a limited hardware warranty for this device, typically two years from the date of purchase, covering defects in material and workmanship under normal use. Please retain your receipt for proof of purchase. The warranty is void if the product is misused, modified, or damaged due to external factors not related to manufacturing defects. For specific terms and conditions, including regional variations, please refer to the official Cooler Master website or consult the documentation provided with your specific product purchase. Other languages for warranty information are available.
Contact Information & Support
For the latest information, support, and downloads, please visit the official Cooler Master website:
- Website: www.coolermaster.com
- Technical Support: account.coolermaster.com
Regional Contact Information:
- Asia Pacific: Cooler Master Technology Inc., 8F., No. 788-1, Zhongzheng Rd., Zhonghe Dist., New Taipei City 23586, Taiwan (R.O.C.). Tel: +886-2-2225-3517
- China: Cooler Master China, Room 2062, Floor 6, No. 421, Weiqing Rd., Jinshan District, Shanghai City, China. Tel: +86-21-51872177
- Europe: Cooler Master Europe B.V., Lodewijkstraat 1b, 5652AC Eindhoven, The Netherlands. Tel: +31-(0)40-702-0900
- North America: Cooler Master NA, 2929 E Imperial Hwy., Suite#110, Brea, CA 92821, USA. Tel: +1-888-624-5099
- South America: E-mail: Soporte_Latam@coolermaster.com.tw
Product specifications and color are subject to change without prior notification.
CM Fanzone - Sign in to CM Fanzone
Home | Cooler Master
