Elektronik - Elektroniknet
senTec Elektronik GmbH
User Guide for senTec ELEKTRONIK models including: WM08A, WM08A VIII Module, VIII Module, Module
senTec Elektronik GmbH WM08A Modul VIII 2BB4J-WM08A 2BB4JWM08A wm08a
File Info : application/pdf, 21 Pages, 1.07MB
DocumentDocumentsenTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Modul VIII Release 1.x Version 1.2 27.02.2025 Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Dear customer, We are delighted that you have decided on a module from the product range of senTec Elektronik GmbH. The senTec Elektronik GmbH offers you the highest quality and the latest technology. In order to be able to take full advantage of the performance of your module and to enjoy your device for many years, please read these operating instructions carefully before connecting and commissioning and operate the module according to the instructions. The operational safety and function of the module can only be guaranteed if both the general safety and accident prevention regulations of the legislator and the safety instructions in the operating instructions are observed. We assume no liability for damage caused by improper use or incorrect operation. Please ensure that everyone who operate the module has read and understood the operating instructions. Keep the operating instructions in a safe place so that you can refer to them at any time if necessary. Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 2 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Content 1 For your Safety ................................................................................................................... 4 1.1 Observe the Operating Instructions............................................................................. 4 1.2 Safety Instructions ...................................................................................................... 4 1.3 Liability for Function and Damage ............................................................................... 4 2 General............................................................................................................................... 5 2.1 Description.................................................................................................................. 5 2.2 Application .................................................................................................................. 5 2.3 Pinout ......................................................................................................................... 6 3 Electrical Specification ........................................................................................................ 7 3.1 Maximum Operating Conditions .................................................................................. 7 3.2 Technical Data ............................................................................................................ 8 4 Mechanical Specification .................................................................................................. 12 4.1 Dimensions ............................................................................................................... 12 4.2 Footprint ................................................................................................................... 13 4.3 Recommended Connector ........................................................................................ 14 4.4 Soldering profile ........................................................................................................ 14 5 Labelling Modul VIII .......................................................................................................... 15 6 EU Declaration of Conformity ........................................................................................... 17 7 FCC .................................................................................................................................. 18 7.1 Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 ...................................................................................................... 18 7.2 FCC Statement ......................................................................................................... 19 7.3 FCC Radiation Exposure Statement ......................................................................... 19 8 ISED ................................................................................................................................. 20 8.1 ISED RF Exposure Compliance Statement according RSS-102 ............................... 20 8.2 RSP-100/ RSS-Gen .................................................................................................. 20 9 Technical Support............................................................................................................. 21 Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 3 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 1 For your Safety 1.1 Observe the Operating Instructions Any commissioning and handling of the module requires precise knowledge and observance of these operating instructions. The module is only intended for the use described. In these operating instructions, especially important comments are highlighted as follows: Warning This is a warning that indicates risk situations and dangers. Failure to observe this warning may result in life-threatening situations. These warnings must be observed! Information This is information that indicates certain features that must be observed. 1.2 Safety Instructions The module is designed for a DC voltage of 3V to 3.7V. Make sure that your device is always operated with the correct DC voltage. 1.3 Liability for Function and Damage The liability for the function of the module is in any case transferred to the owner or operator, if the module is improperly maintained, repaired or changed by persons who do not belong to an authorized specialist company or if it is handled that does not correspond to its intended use. The senTec Elektronik GmbH is not liable for damage caused by failure to observe the above information. The warranty and liability conditions of the sales and delivery conditions of senTec Elektronik GmbH are not extended by the above information. Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 4 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 2 General 2.1 Description The Modul VIII is a radio module with an integrated EFR32FG23 from Silicon Labs. The EFR32 combines an ARM Cortex-M33 core with a sub-GHz transceiver. The module has 256kB flash memory, 32kB RAM and can be used as a plug-in module or as module for PCB assembly. The module has a double side 4-pin edge connector and 19 side pads for the PCB assembly. The edge connector contains the power supply, UART interface, programming interface and the side pads contains different user defined GPIOs. The power supply for the module is 3.3VDC. The module has a fixed integrated PCB-antenna. The module is certified according to the Radio Equipment Directive 2014/53/EU, FCC and ISED. 2.2 Application The main applications for the module are: · Home and Building Automation · Water, Gas and Energy Meter Measurements · Wireless Sensor Networks · Lighting Control · Health and Fitness Applications Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 5 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 2.3 Pinout 19 1 2 3 4 18 17 16 15 14 13 12 11 10 9 8 7 6 5 S1 S2 S3 S4 PAD Modul 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PAD SIDE CONNECTOR S1 S2 S3 S3 S7 S5 S8 S6 S4 S3 S3 S3 Funktion VCC_3.3V ADC0_CH0 PA08 #RESET DGND DGND UART0_RX UART0_TX SWCLK SWDIO SWO PC00 PC01 PC02 PC05 PC04 PC03 DGND DGND DGND PIN EFR22FG23 (M40) 12, 24, 27, 28, 40, 57 29 11 EP EP 26 25 22 23 24 1 2 3 6 5 4 EP EP EP Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 6 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de 3 Electrical Specification 3.1 Maximum Operating Conditions Parameter Temperature Range Storage Maximum Soldering Temperature External Voltage Supply Voltage I/O Symbol TSTG TS VDDMAX VIOPIN Min -40 - 0 -0.3 Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Type - - - Max 85 Unit °C 260 °C 3.8 V VDD + 0.3 V The module is designed for a DC voltage of 3V to 3.7V. Make sure that your device is always operated with the correct DC voltage. Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 7 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de 3.2 Technical Data Parameter Temperature Range Operation Voltage Supply Operation Voltage I/O Power Consumption TX (14dBm) Power Consumption RX Symbol TSTG VDD VIOPIN ITX10 IRX Min -20 3.0 -0.3 - Reception Sensitivity PLNA - Receiver Category EN 300 220-1 V3.1.1 - - Internal Clock Frequency fint - Memory Size RAM - - Memory Size Flash - - Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Type - 3.3 25 4 -112 1.5 Max 70 Unit °C 3.7 V VDD + 0.3 V - mA - mA - dBm - - - 78 MHz 32 - kB 256 - kB Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 8 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software HF Characteristics senTec Radio Protocol RED Parameter Modulation Symbol Min Type Max Unit 2GFSK Frequency Deviation fDev ±40 ±50 ±60 kHz Frequency Bandwidth fOCW 150 200 350 kHz Data Rate 100 kbps Transmission Power PPA Power Amplifier 14 dBm Reception Sensitivity PLNA -110 dBm Duty Cycle DC 1% Basic Frequency (Band L&M) fBas 867,500 868,000 869,850 MHz Frequency CH1 (Band L) fCH1 865,450 865,500 865,550 MHz Frequency CH2 (Band L) fCH2 866,120 866,125 866,130 MHz Frequency CH3 (Band L) fCH3 866,700 866,750 866,800 MHz Frequency CH4 (Band L) fCH4 867,370 867,375 867,380 MHz Frequency CH5 (Band R) fCH5 869,800 869,850 869,900 MHz Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 9 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software HF Characteristics senTec Radio Protocol FCC Parameter Modulation Symbol Min Type Max 2GFSK Frequency Deviation fDev ±190 ±200 ±210 Frequency Bandwidth 6dB fOCW 500 550 600 Data Rate 100 Transmission Power PPA 17 Power Amplifier Reception Sensitivity PLNA -110 Duty Cycle DC 1% Basic Frequency fBas 915,150 915,500 915,85 Frequency CH1 fCH1 903,150 903,500 903,85 Frequency CH2 fCH2 904,350 904,700 905,05 Frequency CH3 fCH3 905,550 905,900 906,25 Frequency CH4 fCH4 906,750 907,100 907,45 Frequency CH5 fCH5 907,950 908,300 908,65 Frequency CH6 fCH6 909,150 909,500 909,85 Frequency CH7 fCH7 910,350 910,700 911,05 Frequency CH8 fCH8 911,550 911,900 912,25 Frequency CH9 fCH9 912,750 913,100 913,45 Frequency CH10 fCH10 913,950 914,300 914,65 Frequency CH11 fCH11 916,350 916,700 917,05 Frequency CH12 fCH12 917,550 917,900 918,25 Frequency CH13 fCH13 918,750 919,100 919,45 Frequency CH14 fCH14 919,950 920,300 920,65 Unit kHz kHz kbps dBm dBm MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 10 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Frequency CH15 fCH15 921,150 Frequency CH16 fCH16 922,350 Frequency CH17 fCH17 923,550 Frequency CH18 Frequency CH19 Frequency CH20 fCH18 fCH19 fCH20 924,750 925,950 927,150 Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 921,500 921,85 MHz 922,700 923,05 MHz 923,900 924,25 MHz 925,100 925,45 MHz 926,300 926,65 MHz 927,500 927,85 MHz Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 11 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de 4 Mechanical Specification 4.1 Dimensions Top View Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Bottom View Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 12 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de 4.2 Footprint Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 13 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de 4.3 Recommended Connector Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software The following connectors are recommended for using the module: Manufacturer AVX AVX Manufacturer Designation Vertical Top Entry Card Edge Manufacturer-Nr 009159004551906 Inverted Thru Board Card Edge 009159004501906 When using other connectors, ensure the exact fit and pin assignment! 4.4 Soldering profile Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 14 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de 5 Labelling Modul VIII Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software The label is located on the top of the shielding from the Modul VIII. The Label size is 16,2mm x 15,0mm. It contains the following information: Information: 1. Software version 2. Module address 3. FCC mark 4. CE mark 5. FCC ID 6. ISED ID 7. Production information as QR-Code 8. Production information as plan text 8 . 3 4 6 5 2 7 1 The manufacturer, product name and the hardware release are printed on the backside of the module. Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 15 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software Picture Modul 868MHz VIII top-side Picture Modul 868MHz VIII bottom-side Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 16 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de 6 EU Declaration of Conformity Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software supplier´s name senTec Elektronik GmbH address Robert-Bosch-Ring 2 98693 Ilmenau We declare in our sole responsibility that the product(s) Modul VIII Hardware Release 1.x Firmware Release 8.x complies with requirements of the following European directive(s): Radio Equipment Directive 2014/53/EU RoHS- directive 2011/65/EU the following standards are used: Safety (Art. 3.1a 2014/53/EU) EMC (Art. 3.1b 2014/53/EU) EN 62368-1:2014/ AC:2015/A11:2017/AC2017 EN 301 489-1 V2.2.3:2019-11 EN 301 489-3 V2.3.1:2022-11 Spectrum (Art. 3.2 2014/53/EU) EN 300 220-1 V3.1.1 EN 300 220-2 V3.1.1 Health (Art. 3.1a 2014/53/EU) EN 62479:2010 Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 17 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 7 FCC 7.1 Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC / ISED rules FCC: 47CFR Part 15 Subpart C §15.247 ISED: RSS-247 2.3 Specific operational use conditions The module has a double side 4-pin edge connector and 19 side pads for the PCB assembly. The edge connector contains the power supply, UART interface, programming interface and the side pads contains different user defined GPIOs. The power supply for the module is 3.3VDC. The module has a fixed integrated PCB-antenna. The operation frequency is 903.5Mhz to 927.5MHz. The modulation type is 2GFSK. 2.4 Limited module procedures Installations Notes: The power supply for the module is 3.3VDC When connect the module to the host device, the host device must power off. Make sure the module pins correctly installed. When used as an SMD module, the PCB antenna area on the circuit board must be free of any copper. 2.5 Trace antenna designs Not applicable. The module does have a fixed PCB-antenna. 2.6 RF exposure considerations This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. 2.7 Antennas PCB-antenna is permanently attached, can't be replaced. The PCB-antenna design corresponds to the Silicon Labs reference design WES0118-01-APL915S-01. 2.8 Label and compliance information Each module has its own label with the FCC identification number. It is placed at the shielding of the module. The host device shall be labelled to identify the modules within the host device, which means that the host device shall be labelled to display the FCC ID of the module preceded by words "Contains transmitter module" or "Contains", E.g. Contains FCC ID: 2BB4J-WM08A 2.9 Information on test modes and additional testing requirements Contact senTec Elektronik GmbH for information on how to configure test modes for the module. 2.10 Additional testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for the specific rule parts listed on the grant. The host product manufacturer, is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 18 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 7.2 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the module Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 7.3 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 19 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 8 ISED 8.1 ISED RF Exposure Compliance Statement according RSS-102 This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 8.2 RSP-100/ RSS-Gen This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 20 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de senTec Elektronik GmbH Robert-Bosch-Ring 2 D-98693 Ilmenau Tel.: +49 (0)3677 / 689 37 - 0 Fax: +49 (0)3677 / 689 37 29 Info@senTec-Elektronik.de Innovation by Electronics Sensor Electronics System Solutions Telemetrie Hardware Software 9 Technical Support If you have any technical questions, please contact us at the following E-Mail-Address: Info@senTec-Elektronik.de Bank: Sparkasse Arnstadt Ilmenau IBAN: DE32840510101113012737 BIC: HELADEF1ILK - 21 - Register: Amtsgericht Jena HRB 304930 VAT Nr.: DE 199934786 St. Nr.: 156 126 00594 CEO: Michael Binhack, Rico Röhner http://www.senTec-Elektronik.de