ROCCAT Kain 200/202 Quick Installation Guide

Connecting the Kain

1. Plug the wireless dongle into any free USB port on your PC.

   To improve connectivity, consider using the included extender plug and charging cable to position the wireless dongle closer to the Kain 200.

2. Flip the Kain over and switch it on.

   [Image description: A diagram showing the underside of the mouse with an 'on/off' switch.]

3. Press the 'pairing' button.

   [Image description: A diagram showing the underside of the mouse with a 'pairing' button highlighted.]

4. Download and install the ROCCAT Swarm software from www.roccat.org/swarm-software and follow the on-screen instructions.

   [Image description: A screenshot of the ROCCAT Swarm software download page.]

Technical Facts

Tech Specs Kain 200/202

• ROCCAT® Owl-Eye 16K sensor with up to 16,000dpi
• Default DPI steps: 400, 800 (default), 1200, 1600, 3200
• 2.4GHz frequency
• 1000mAh battery
• 1000Hz polling rate
• Distance Control Unit
• 40G acceleration
• ARM Cortex-MO 48MHz
• 512 kB onboard memory
• Angle Snapping: Adjustable on/off
• 1ms response time
• Light 105g weight
• Operating Temperature: 0~40 °C
• Input Rating: 5.0 Vdc, 500mA (Mouse), 5.0 Vdc, 100mA (Dongle)

System Requirements

• Windows® 7, 8 and 10 (software support)
• USB 2.0 (or higher)
• Internet connection (for driver software)

Default Button Assignment (no driver installed)

1

Left mouse button

2

Right mouse button

3

Universal scroll

4

Scroll up

5

Scroll down

6

IE Forward

7

IE Backward

8

DPI Cycle

[Image description: A diagram showing the top view of the mouse with numbered buttons corresponding to the default assignments.]

Support

Should you need assistance, ROCCAT's support team is ready to help with any technical questions. Send an e-mail to support@roccat.org or visit the website at: WWW.ROCCAT.ORG/SUPPORT

Disposal Information

The crossed-out wheelie-bin symbol indicates that this product must not be disposed of with unsorted household waste. Electrical devices can contain harmful substances that may cause environmental damage or harm to health if not disposed of correctly. Therefore, these products must be disposed of separately. As the end user, you are legally required to dispose of used electrical equipment at an official recycling point. For information about local recycling points, contact your local authority, civic amenity site, or the store where you purchased this product. By disposing of electrical products at an official recycling point, you contribute to correct recycling and environmental protection.

When purchasing a new product, the retailer may allow you to hand in old products and dispose of them free of charge, provided the product you are handing in is of a similar type and has the same functions as the product you are purchasing. Small used electrical and electronic equipment (measuring no longer than 25 cm on any one side) can be handed in for free and with no obligation to purchase a similar product at electrical and electronic retail outlets with sales areas larger than 400m² or at nearby recycling points designated by the retail outlet.

Wherever possible, remove any batteries before disposing of the device. Unauthorized disposal of devices, batteries, and accumulators by the user may lead to penalties according to applicable legislation.

Technical Support

For technical problems with this product, please contact ROCCAT Support via www.roccat.org/support.

Join the community

Become a ROCCAT member and register your product at: www.roccat.org/support/register-your-product

Benefits include:

• Up to 10% off for registered members
• Easy access to customer support
• Make sure you own an original
• Exclusive deals and opt-in for special offers and downloads

Please use your product's serial number (located on the bottom label) for registration.

Safety Guidelines

General Safety Guidelines and Intended Use

1. Do not open or modify the product.
2. Unauthorized changes or modifications may void the operation authority and/or warranty.
3. In case of trouble or doubt, contact ROCCAT Support immediately.
4. Keep the product away from fire, water, humidity, and temperature extremes.
5. Only use as intended with a compliant PC and connector part.
6. Improper or incorrect use of the product, or use of the product for purposes not recommended by the manufacturer, voids the liability and/or warranty.
7. Do not look into the light beam on the bottom of the mouse.

Battery Safety Guidelines

1. Improperly treated rechargeable batteries may catch fire or cause chemical damages and injuries.
2. Do not disassemble or modify the battery in any way.
3. If the battery is damaged or appears abnormal, stop using it.
4. Do not short-circuit the battery.
5. Do not leave the battery discharged or unused for extended time periods.
6. If the battery is replaceable by design, do not apply higher forces which may damage the battery.
7. Only use original equipment and cables for charging.

Warning: If the battery is incorrectly replaced, there is a danger of explosion. Dispose of used batteries according to the manufacturer's instructions.

Compliance Information

Hereby, Voyetra Turtle Beach Corp. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. The full Declaration of Conformity can be requested via: Company: Voyetra Turtle Beach Corp., Address: 11011 Via Frontera, Suite A, San Diego, CA 92127 United States, E-Mail: support@roccat.org.

FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Mouse FCC ID: XGBKAIN

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

NCC 警語: According to the Low-Power Radio-Frequency Devices Management Regulation: Article 12: Without permission, any company, business or user shall not change the frequency, increase the power or change the original design and function of a low-power radio-frequency electrical machine. Article 14: The use of low-power radio-frequency electrical machines shall not affect flight safety and interfere with legal communications. If interference occurs, it should be stopped immediately and improved until no interference occurs. The aforementioned legal communications refer to radio communications operated in accordance with telecommunications regulations. Low-power radio-frequency electrical machines must tolerate interference from legal communications or industrial, scientific and medical radio-frequency equipment.

BSMI Limited Substances Declaration: For inquiry, please visit http://bsmi.roccat.org/200

Australian Consumer Law: Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.