Safety Instructions
Please keep these instructions in a safe place. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning safe use of the appliance and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
An all-pole switch must be added for disconnection from the supply mains in the fixed wiring, in accordance with wiring rules. The switch shall provide all-pole full disconnection under overvoltage category III condition.
WARNING: If any abnormal pendulum motion is observed, immediately stop using the ceiling fan and contact the manufacturer, its after-sales service, or a suitably qualified person.
Safety Information: Do not poke any objects or fingers through the protective screens. Do not place any objects, such as clothing, on the device. Be careful with long hair, as it can be sucked in by the airflow. Keep sufficient distance. Keep all safety instructions and instructions for future reference.
Maintenance Cycle: No maintenance is scheduled for this unit. In the event of a defect or excessive wear, please contact the manufacturer, its after-sales service, or a suitably qualified person. After installation, the fan blades must not be removed for cleaning and maintenance.
Assembly
For assembly, please observe the following instructions.
Product weight: 2.1kg
The replacement of parts of the suspension system securing device may only be carried out by the manufacturer, its customer service, or a suitably qualified person.
? This product may only be mounted at a height of at least 230cm above the floor.
The base plate for mounting on the ceiling must be attached with sufficient strength to withstand 4 times the weight of the ceiling fan.
The mounting of the suspension system must only be carried out by a qualified person.
Assembly Steps:
- Ensure power is OFF at the breaker.
- Mount the ceiling bracket securely to the ceiling.
- Connect the main power supply wires (Live 'L' and Neutral 'N') to the appropriate terminals.
- Attach the base plate to the ceiling.
- Connect the fan's power wires (Live 'L' and Neutral 'N') to the receiver or junction box.
- Connect the control receiver unit.
- Attach the fan assembly to the mounted bracket. Insert 2x AAA batteries into the remote control.
- Restore power at the breaker.
Remote Control Instructions
Range: max 5m.
Control via wall switch sequence: 6500K-2700K-4000K-2700K 10%
- Button 1 (CW): Main light on/off.
- Button 2 (FAN): Fan on/off.
- Button 3 (?): Night light (2700K - 10%).
- Button 4 (? MODE): RGB mode (9 dynamic modes).
- Button 5 (RGB): RGB On/Off.
- Button 6 (RGB): RGB color change (12 colors).
- Button 7 (⬆️): Increase brightness.
- Button 8 (⬇️): Decrease brightness.
- Button 9 (☀️): Change light color from warm white to cool white.
- Button 10 (☀️): Change light color from cool white to warm white.
- Button 11 (6500K-2700K-4000K): CCT Presets (Cool White, Warm White, Neutral White).
- Button 12 (⏱️ L-30min): LED timer function 30 minutes. Press once to start (1 optical signal). Press again to cancel (2 optical signals).
- Button 13 (?): Fan forward/reverse rotation.
- Button 14 (⏱️ F-1h): Fan timer function 60 minutes. Press once to start (1 acoustic signal). Press again to cancel (2 acoustic signals).
- Button 15 (+): Short press: Fan ON (lowest level).
- Button 16 (m): Short press: Fan ON (medium level).
- Button 17 (+): Short press: Fan ON (highest level).
Product Information
This product contains a light source of energy efficiency class E.
⚠️ The light source and the separate control gear should only be replaced by a qualified person.
⚠️ Caution: Risk of electric shock.
Battery Disposal
Legal Obligation: As an end-user, you are legally obliged to return used batteries.
Return: Used batteries can be returned free of charge to the Brilliant AG shipping warehouse or your local dealer.
Symbols:
- Pb: Battery contains more than 0.004% lead by mass.
- Cd: Battery contains more than 0.002% cadmium by mass.
- Hg: Battery contains more than 0.0005% mercury by mass.
- ??️ (Crossed-out dustbin): Battery must not be disposed of in household rubbish.
Battery Handling:
- Clean battery and device terminals before insertion if required.
- Remove exhausted batteries promptly to prevent leakage.
- Never expose batteries to excessive heat (sunlight, fire).
- Always replace all batteries at the same time.
- Use only batteries of the same type; do not mix types or used/new batteries.
- Remove batteries if the device is unused for long periods.
Home
