RISCO Panda 4-Button 2-Way Keyfob: Configuration and User Guide

Introduction

The RISCO Group's Wireless 2-Way Keyfob offers advanced technology in a streamlined design, ideal for users seeking high security standards. It is compatible with all RISCO Group wireless intrusion systems and is easy to configure for use in homes, apartments, or small offices.

How it Works

The keyfob allows users to conveniently control their security system, typically for arming, disarming, and sending panic alarms. Its bi-directional communication enables it to receive status replies from the panel, indicated by color LEDs. The keyfob can be attached to a keychain or worn as a pendant.

Main Features

• Bi-directional wireless communication
• Up to 200 m (650 feet) range
• Simple battery replacement
• Modern aesthetic

Operation

The keyfob has different functions based on button press duration:

Status LED Indications

The LED lights up after each press, indicating successful signal transmission. The first LED indicates command transmission, and the second LED indicates status reception.

Configuration

Allocating the Keyfob / Remote Control to the Receiver

The 2-Way Keyfob must identify itself with the system receiver. Allocation can be done by entering the keyfob’s 11-digit serial number into the system or by using RF mode.

To allocate the Keyfob / Remote Control:

1. Set the system receiver to Learn Mode.
2. Send an allocation message:
   • RF – Press the + keys for at least 2 seconds.
   • Code – Enter the 11-digit serial number into the system.

The system receiver will recognize the Keyfob, and an allocation message will sound. The LED on the Keyfob will blink.

Cleaning and Maintenance

Cleaning the Keyfob / Remote Control

Clean the Keyfob with a dry or damp cloth. Do not expose the keys directly to liquid.

Replacing the Keyfob / Remote Control battery

1. Using a small screwdriver, twist to open the Keyfob (see Figure 1).
2. Remove the old battery.
3. Press any one of the keys.
4. Insert the new battery (see Figure 2).
5. Close the Keyfob cover (see Figure 3).

Replace batteries once a year or when the low battery LED indicates.

Technical Information

SPECIFICATIONS

• Range: Up to 200m (650 feet) range (LOS)
• Frequency: 433.92, 868.65, 915 MHz
• Battery Type: CR2430, 3V lithium, 280 mA
• Power Output 868.65MHz: 10 mW
• Typical Battery Life: 4 years
• Low Battery Threshold: 2.5V
• Quiescent Current Consumption: 4 µA
• Maximum Current Consumption: 30 mA
• Dimensions (H x W x D): 41 x 41 x 17 mm (1.60 x 1.60 x 0.70“)
• Operating temperature: -10°C to 55°C (14°F to 131°F)
• Average Relative Humidity: 75%
• Weight: 20 grams (0.7 oz.)
• Standard Compliance: EN 50131-1, EN 50131-6 Type C and EN50131-3 Grade 2 Environmental Class II, Type A ACE

Ordering Information

RED Compliance Statement

RISCO Group declares that this equipment complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the CE Declaration of Conformity, please visit: www.riscogroup.com.

Standard Limited Product Warranty

RISCO Ltd. guarantees its hardware products to be free from defects in materials and workmanship for 24 months from the date of delivery, when used and stored under normal conditions and in accordance with instructions. This warranty is for customers who purchased directly from RISCO or an authorized distributor. RISCO does not warrant the product to consumers directly. Authorized distributors or installers handle all end-user interactions. RISCO is not liable for warranties or services provided by distributors or installers to end-users. Remedies include repair or replacement of defective products. A Return Material Authorization (RMA) number is required for all returns. Products returned without a valid RMA# will be refused. RISCO's entire liability is limited to the repair or replacement of products. Warranty is contingent upon full payment and proven weekly testing of product functionality. The warranty is void if products are improperly operated, neglected, misused, altered, repaired without approval, or damaged by factors beyond RISCO's control. Batteries are explicitly excluded from the warranty. RISCO is not responsible for the end-user's security system performance or any software or third-party components. RISCO provides products "AS IS" and disclaims all other warranties, express or implied. RISCO is not liable for lost revenues, profits, or consequential damages.