User Manual for Sage models including: JSGS006, VRBJSGS006, JSG-S006 BLE Sensor, JSG-S006 Sensor, BLE Sensor, Sensor
Sage Co., Ltd. JSGS006 VRBJSGS006 VRBJSGS006 jsgs006
File Info : application/pdf, 8 Pages, 595.65KB
DocumentDocumentSage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan TM User manual for BLE Sensor JSG-S006 Ver 1.0 Sage Co.,Ltd. April 21, 2022 Date: 2022/4/21 Contact Information Taiki Urasaki Engineer t.urasaki@jsage.co.jp Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama City KanagawaPref 231-0013 Japan Contents GENERAL 1.JSG-S006 date sheet 2. System Block diagram 3. Appearance 4. Components 5. Installation Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan 1 General Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan Purpose of this Guide is to install the devices and to describe the related function how to use them for the Dealers and Mechanic of contracting company. The functions are necessary to operate the initial setup and maintain an appropriate usage of the App. FCC Statement Any changes or modifications not expressly approved by theparty responsible for compliance could void the User's authority to operate the equipment. This Device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This Device may not cause harmful interference, and (2) this Device must accept any interference received, including interference that may causeundesired operation. FCC Radiation Exposure Statement: This Device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should beinstalled and operated with minimum distance 8 inches (20cm) between the radiator & User's body. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter. Class B digital device: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 2 1 JSG-M004 data sheet Physical Size Weight Environment Operating temperature Storage temperature Performance Maximum electric power consumption Standby electric power consumption Version Hardware version Software version Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan W65×D40×H20 mm 50g -20 degrees C to +60 degrees C -30 degrees C to +80 degrees C 2mA /3 V 1mA / 3V 1.00 1.00 3 2 System Block diagram Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan PF TCU JSG-M004 BLE Sensor JSG-S006 BLE Tag JSG-B001 4 3 Appearance Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan 5 4 Components Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan 1 1: Power (CR2477) 2: BLE Module 2 6 5 Installation Sage Co., Ltd. 2F,KY- Bldg. 2-24 Sumiyoshi-Cho Naka-Ku Yokohama-City Kanagawa Pref 231-0013 Japan BLE is installed on the engine cover covering the flywheel. BLE detects engine on/off state by measuring magnetic field using the internal magnetic sensor. This product used at a distance 8 inches (20cm) or more from the User's body. Since this product is fixed to the construction machine with magic tape, it is used with the human body at a distance of 8 inches or more. 7