Ducati Panigale V4SP2 Ignition, Keys, and Immobilizer System
Ignition Switch and Steering Lock
The ignition switch and steering lock are located in front of the fuel tank and feature three positions:
- A) ON: Enables lights and engine operation.
- B) OFF: Disables lights and engine operation.
- C) LOCK: The steering is locked.
Note: To move the key to the LOCK position, press it down before turning it. The key can be removed in positions (B) and (C).
This system is associated with the Panigale V4SP2 model.
Keys and Immobilizer System
The motorcycle is supplied with two keys, each containing the "Immobilizer system code".
Keys (B) are designated for standard use, including:
- Starting the engine.
- Opening the fuel tank plug.
- Opening the seat lock.
Attention: For security, separate the keys and use only one key to operate the motorcycle.
Duplicate Keys
If spare keys are needed, contact a Ducati authorised service centre and present your existing keys.
Immobilizer Functionality
The motorcycle is equipped with an engine electronic block system (immobilizer) for enhanced anti-theft protection. This system is automatically activated each time the instrument panel is switched off.
Each key contains an electronic device within its handgrip that modulates a signal. This modulated signal acts as a unique "password" that changes with each start, allowing the control unit to authenticate the key and enable engine starting.
Note: If the motorcycle ownership changes, it is necessary to program all keys for the new owner.
The Ducati authorised service centre may require proof of ownership to program keys. Missing key codes will be erased during the programming procedure to prevent any lost key from starting the engine.
Declarations of Conformity
This section provides declarations of conformity for radio equipment installed in the vehicle, adhering to EU Directive 2014/53/EU.
Manufacturers of the radio equipment declare that their devices comply with the directive where required by law. The complete text of the EU declaration of conformity is available at: certifications.ducati.com.
Table 1: Radio Equipment Specifications
| Radio equipment installed in the vehicle | Frequency band | Max. transmission power |
|---|---|---|
| Instrument panel | 134.6 KHz | < 66dBμA/m (10m) |
| Instrument panel | 119 KHz + 135 KHz |
Table 2: Manufacturers' Addresses
| Radio equipment installed in the vehicle | Manufacturers' addresses |
|---|---|
| Instrument panel | MAE Via Presolana 31/33 24030 Medolago (Bergamo), Italy |
Declarations of conformity are provided in multiple languages, including German, French, Bulgarian, Croatian, Greek, Hungarian, Italian, Latvian, Lithuanian, Maltese, Dutch, Polish, Portuguese, Romanian, Slovak, Slovenian, Spanish, Swedish, Czech, Danish, Estonian, Finnish, Turkish, and English.
United States (USA) Compliance
FCC Compliance:
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modifications could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
DASHBOARD
FCC ID: 2AVGH-RTADM003
