Introduction

Thank you for purchasing the CLARKE CON1200RD Rotary Hammer Drill. This tool is designed for general drilling, masonry drilling, chiselling, and drill & hammer use in light industrial applications. Please read these instructions carefully to ensure safe operation and long-lasting service from your new tool.

Safety Precautions

Always prioritize safety. Ensure the work area is clean and well-lit. Avoid operating in explosive atmospheres. Keep children and bystanders away. Always use appropriate personal protective equipment, including eye protection, and ensure proper footing and balance. Do not wear loose clothing or jewelry. Disconnect the power supply before making any adjustments or changing accessories.

Product Overview

The CON1200RD features an SDS+ chuck for quick bit changes, a rotation stop switch, a hammer action selector, and a trigger. The front handle can be repositioned for user comfort. Refer to the diagrams for detailed component identification.

Operation

Before starting, select and insert the appropriate drill bit or chisel. Adjust the front handle for optimal positioning. Select the desired operating mode (Drill Only, Hammer Drill, or Hammer only). For vertical overhead drilling, use the dust shield cup. Position the tool against the surface and pull the trigger. For hammer action, ensure the tool is in contact with the surface before starting.

Maintenance and Servicing

After use, clean the tool and remove any dust or debris. Keep the handle clean and free from oil and grease. Worn or damaged parts should be replaced by qualified personnel. Periodically check and top up the gearbox grease with a high melting point grease. Do not overfill the gearbox.

Specifications

The Clarke CON1200RD operates on 230V AC, 50Hz, 1-phase power, with a rated input of 1200W. It features an SDS+ Plus chuck, with rotational speeds of 860 rpm (Drill Mode) and 820 rpm (Drill/Hammer Mode). The impact rating is 4050 blows/min. Maximum drilling capacities are 42mm in wood, 13mm in steel, and 32mm in concrete.

Parts and Service

For spare parts and service, please contact Clarke International. Refer to the contact details provided in the document for Parts Enquiries and Servicing & Technical Enquiries. When ordering spare parts, quote the reference TXCON1200RD01 onwards.

Declarations of Conformity

The product complies with relevant UKCA and CE directives and standards, including Electromagnetic Compatibility, Machinery Safety, and Restriction of Hazardous Substances. Full details of applied standards and declarations are provided within the document.