V-TAC LED Flood Light Instruction Manual
WEEE Number: 80133970
Technical Data
| MODEL | SKU | WATTS | LUMENS | BEAM ANGLE | LIFE SPAN | DF | CRI | INPUT VOLTAGE | OPERATION TEMPERATURE | DIMENSION | N.W. (KGS) | MAX MOUNTING HEIGHT | PROJECTED AREA(MM²) | WIRE LENGTH |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VT-44031 | 23692 23693 | 30W | 4800 | Sphere 360° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 164.5x34x153mm | 0.41 | <5M | 25168.5 | 0.5 M |
| VT-44051 | 23694 23699 | 50W | 8000 | Sphere 360° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 183.5x34x169mm | 0.56 | <5M | 31011.5 | 0.5 M |
| VT-44106 | 23700 23701 | 100W | 16000 | Sphere 360° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 253.5x40x242.5mm | 1.1 | <5M | 61473.75 | 1 M |
| VT-44160 | 23702 23703 | 150W | 24000 | Sphere 360° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 328.5x43x295mm | 1.78 | <5M | 96907.5 | 1 M |
| VT-44206 | 23696 23704 | 200W | 32000 | Sphere 360° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 402.5x44x349.5mm | 2.8 | <5M | 140673.75 | 1 M |
*This product contains a light source of energy efficiency class [energy efficiency class C], where [energy efficiency class C] shall be replaced by the energy class of the contained light source.
Introduction & Warranty
Thank you for selecting and buying a V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any further queries, please contact your dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 hours daily operation. Usage of the product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.
Features: IP65 RATING | 5 YEAR WARRANTY* | SPHERE 360° BEAM ANGLE | SUPER BRIGHT 160+ LM/WATT EFFICIENCY
Recycling Information: This device, its accessories and cords are recyclable. Dispose of at collection points. Prioritize repair or donation of your device!
Warnings
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- Terminal block not included.
- Proper grounding should be ensured throughout the installation.
- For outdoor use.
- Replace any cracked protective shield.
- Minimum distance from lighted objects: [minimum distance 1m].
NOTE: To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach.
⚡ [Caution, risk of electric shock.]
? [Replaceable (LED only) light source by a professional]
♻️ [This marking indicates that this product should not be disposed of with other household wastes.]
[QR code for multi-language manual]: Please scan the QR code to access the manual in multiple languages.
Installation Diagram
Step 1: Detach the bracket from the fixture.
Step 2: Mark the hole positions on the wall for fixing the bracket.
Step 3: Drill holes at the marked positions.
Step 4: Screw the retaining bracket to the wall using suitable screws.
Step 5: Mount the fixture back to the bracket. Connect wiring: Blue wire to Neutral (N), Yellow/Green wire to Earth (Ground), Brown wire to Live (L).
Installation Instruction
- DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE.
- CONNECT WITH WATERPROOF CABLE HOUSE ONLY.
- ENSURE ELECTRICITY IS SWITCHED OFF BEFORE INSTALLATION.
- Please do not mount to a surface that is prone to vibrations.
- Remove the screw and the bracket (See Figure 1).
- Before drilling, mark the hole position for fixing the bracket onto the wall (Screws not supplied) (See Figure 2).
- Screw the retaining bracket to the wall with a suitable quantity of screws (See Figure 4).
- Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw (See Figure 5).
- Connect your main cable (HO5RN-F3G1.0mm² Recommended) with the input lead of our product through the waterproof junction box.
- Note the line (-) of the lead. Use a junction box of IP65 or above. Ensure to tighten the waterproof screw.
- Switch on the power to make sure if the product is working.
Dismantling Instructions
(For Market surveillance team only)
Note: Light source removal will void the warranty.
Compliance & Contact
[RoHS compliant] [CE certified] [UKCA certified] [PAP packaging]
For any query/issue with the product, please reach out to us at: SUPPORT@V-TAC.EU
For more products range, inquire please contact our distributor or nearest dealers.
V-TAC WEST EUROPE LTD. GROUND FLOOR, 71 LOWER BAGGOT STREET, DUBLIN 02, IRELAND DO2 P593
