RGF Environmental Group, Inc.

Product Overview: The Mini Split PHI Unit

The PHI line of products by RGF Environmental Group, Inc. is engineered to combat sick building syndrome risks. It achieves this by reducing odors, air pollutants, bacteria, and virus-causing germs through the patented Photohydroionization® (PHI) process. The Mini Split PHI Cell is designed for easy mounting onto existing Mini Split air conditioning, heating, and heat pump units. When the Mini Split system is operational, the PHI Cell employs an Advanced Oxidation Process to effectively reduce airborne contaminants.

Note: Please take time to read the attached assembly instructions. All instructions and precautions should be adhered to while operating this system.

Manufactured in the USA by RGF Environmental Group, Inc. Copyright 2013.

Typical Installation

The system facilitates the purification of incoming air.

Diagram: Arrows indicate 'Incoming air containing bacteria, mold, smoke, virus and VOCs' flowing into an 'RGF Mini Split unit'. Arrows then show 'Purified air distributed to conditioned space' flowing out.

Figure 1 illustrates this process.

PHI Cell Features

The PHI Cell incorporates a proprietary UVX Long life lamp.

Figure 2 shows the components of the PHI Cell, including the ballast and the UVX lamp.

Installation Instructions

CAUTION: NEVER LOOK DIRECTLY AT AN ILLUMINATED PHI CELL. THIS DEVICE PRODUCES GERMICIDAL UV LIGHT AND WILL CAUSE DAMAGE TO EYES.

Kit Contents:

• Mini Split unit with high voltage 230V ballast and 3' leads
• Instruction manual

NOTE: BE SURE MINI SPLIT UNIT IS UNPLUGGED AND POWER IS DISCONNECTED BEFORE PROCEEDING WITH INSTALLATION.

Installation & Electrical Instructions:

1. Remove plastic tapes from velcro tabs and position Mini Split unit over the intake of the indoor air unit. Press firmly to attach the adhesive tab to the unit. (Refer to Figure 3)

Figure 3: Image showing the Mini Split unit being positioned over the intake of an indoor air unit, with red arrows indicating placement.

Electrical Connections:

The power wire leads can be connected to the power source through the back panel of the indoor unit (Refer to Figure 4).

3. Remove the cover from the indoor unit. Connect L1 (black wire) to S1 terminal. Connect L2 (white wire) to S2 terminal. (Refer to Figure 5).

Figure 4: Image showing the back panel of the indoor unit with connection points.

Figure 5: Close-up image of electrical terminals (S1, S2, S3) for connecting wires.

Cell Replacement

Important: Disconnect power before replacing the cell.

1. Pull the Mini Split unit off of the indoor unit.
2. Press the locking springs clips with thumbs to remove the cell bracket. (Figure 6)
3. Disconnect the cell from the bracket and the 4-pin connector. (Figure 7)
4. Install the new cell. Reverse steps 1-3.

Figure 6: Image showing how to remove the cell bracket from the indoor unit.

Figure 7: Image showing the disconnection of the cell from its bracket and a 4-pin connector.

Additional RGF Products: In Duct Microbe, VOC and Allergen Solutions

RGF's Guardian Air PHI

RGF's Guardian Air PHI is designed to eliminate sick building syndrome risks by reducing odors, air pollutants, VOCs (chemical odors), smoke, mold, bacteria, and viruses*. The HVAC-PHI Cells are easily mounted into air conditioning and heating systems air ducts, addressing common indoor air quality issues. When the HVAC system is operational, the HVAC-PHI Cell creates an Advanced Oxidation Process consisting of: Hydro-peroxides, super oxide ions, and hydroxide ions. These are friendly oxidizers that revert back to oxygen and hydrogen after the oxidation of the pollutant.

Image: A cylindrical air purification device with a blue filter element.

Guardian Air REME HVAC Cell

REME (Reflective Electro Magnetic Energy) utilizes an electromagnetic energy cell to create ionized hydro peroxides™, a friendly oxidizer plasma made from oxygen and humidity. This air purifying plasma is propelled into the HVAC duct or plenum by a silent plasma propulsion module that has no moving parts, yet propels the plasma at 2 cfm. This provides for fan or blower-less operation on a 24-hour basis. The purifying plasma will be propelled through the ducts whether the fan or blower is on or not. A 24-volt installation allows the REME to run 24/7 without wiring to the fan/blower circuit. The oxidizer plasma transfers electrical charge (positively and negatively charged ions) from the hydro peroxides to suspended (airborne) particles in the occupied space, causing them to bond together. This makes particles too heavy to float, enabling them to be drawn back to the filter. This is an excellent solution for individuals suffering from dust and dander allergies.

Image: A cylindrical device with internal components visible, labeled as an electromagnetic energy cell.

Warranty Information

Five Year Limited Warranty with Two Year Exchange Policy

This warranty supersedes and replaces any warranty statements made orally by the Sales Person, Distributor, or Dealer, or contained in the written instructions or other brochures or informational documents related to this product.

Manufacturer warrants the new Guardian Air by RGF® unit to be free from defects in material and workmanship under normal use and service when operated and maintained in accordance with manufacturer's instructions for a period of five years (sixty months) from the original date of purchase (excludes PHI or REME cell). The PHI or REME cell included with the original unit is warranted to be free from defects in material and workmanship for a period of 2 years (24 months) from original purchase date. (For international orders, twelve (12) months parts only. Shipping not included.)

For the first two years (24 months), the manufacturer offers an immediate over-the-counter exchange for a demonstrated defective unit. The company making this exchange and requesting credit for said unit is obligated to verify that the unit or cell is in fact defective. After the initial 2-year period (up to five years from original date of purchase), this warranty is limited to repairing or replacing the ballast found to its satisfaction to be defective, excluding the PHI or REME cell included with the original purchase. Hereafter, the unit will need to be returned to the manufacturer under a Returned Materials Authorization (RMA) for review and/or repair (if found defective).

This warranty does not cover parts damaged by decomposition from chemical action or wear caused by abrasive materials, nor does it cover damage resulting from misuse, abuse, or any other than its intended use, accident, neglect, or from improper operation, maintenance, installation, modification, or adjustments.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

To obtain warranty service and a return authorization number, contact your supplier.

Model number: MINI SPLIT-HVAC-PHI-230

Replacement cell part number: PHIC-5GA

Include a copy of your Bill of Sale, Invoice or Receipt of Purchase, with an explanation of the problem or defect.

Hg- LAMP CONTAINS MERCURY: Manage in accord with disposal laws. See: www.lamprecycle.org

WARNING (French): The user should never attempt to wash the inside of the indoor unit. Should the inside of the unit require cleaning, contact your dealer.

LIMITED WARRANTY COMMON QUESTIONS

How long is the warranty?

• 2 years for the cell from initial start up
• 5 years for the ballast from initial start up

How do I contact the Manufacturer about my warranty, a question, or complaint?

• Your local Sales Representative may answer a question or complaint.
• If they cannot answer the warranty question or complaint, you can contact your local supplier and request the warranty department.

Are there any parts not covered by this warranty (that the manufacturer will not repair or replace)?

• Yes. Parts damaged by decomposition from chemical action, humidity, moisture, or wear caused by abrasive materials. It does not cover damage resulting from misuse, abuse, or any other use other than its intended use. This warranty does not cover accident, neglect, or from improper operation, maintenance, installation, modification, or adjustments.
• Parts not made by Manufacturer. However, your supplier will process the claim with the other manufacturer.

What do I do in the event the equipment is damaged in shipping?

• Immediately upon receipt of the unit, you as the purchaser should inspect the unit and test it to make sure it is operational.
• If there is visible damage to the equipment:
  1. Notify the carrier shipping office immediately and write on the Bill of Lading the visible damage or part(s), which are broken or missing.
  2. Call your local supplier immediately to specify the damage.
  3. Your supplier should refund the unit at the supplier's cost.
• Thoroughly read and understand all Operating Instructions, Warnings, and Precautions before commencing application.

Warranty Request Form

(INCOMPLETE FORMS WILL NOT BE PROCESSED!)

NOTE: THIS COMPLETED FORM MUST ACCOMPANY ALL RETURNED ITEMS WITHIN 30 DAYS FOR PROCESSING. SHIP TO YOUR DISTRIBUTOR.