RAVEMEN FR300 ANT+ Bike Light
Product Overview
The RAVEMEN FR300 ANT+ is a high-performance bicycle light designed for cyclists seeking reliable illumination and advanced connectivity. This manual provides detailed information on its features, operation, and maintenance.
Key Features
- ANT+ Connectivity: Seamlessly integrates with ANT+ enabled cycling computers and devices for remote control and data display.
- High Brightness: Provides powerful illumination for enhanced visibility and safety during night rides or in low-light conditions.
- Durable Construction: Built to withstand the rigors of cycling, with water-resistant and shock-absorbent properties.
- Multiple Lighting Modes: Offers various modes to suit different riding environments and preferences.
- Rechargeable Battery: Features a long-lasting rechargeable battery for extended use.
Operation
Getting Started
Before first use, ensure the FR300 ANT+ is fully charged. Connect the provided USB cable to the charging port and a power source. The charging indicator light will show the charging status.
Powering On/Off
Press and hold the power button to turn the light on or off. A short press may cycle through different lighting modes.
Mode Selection
Cycle through the available lighting modes (e.g., High, Medium, Low, Flash) by briefly pressing the power button or using an connected ANT+ device.
ANT+ Pairing
Refer to your ANT+ cycling computer's manual for instructions on pairing new sensors. Ensure the FR300 ANT+ is in pairing mode (if applicable) and discoverable by your device.
Specifications
| Feature | Specification |
|---|---|
| Model | FR300 ANT+ |
| Brightness | 300 Lumens (Max) |
| Battery Type | Rechargeable Lithium-ion |
| Runtime | Varies by mode (refer to detailed specs) |
| Charging Time | Approximately X hours |
| Water Resistance | IPX5 |
| Connectivity | ANT+ |
| Dimensions | [Dimensions] |
| Weight | [Weight] |
Maintenance and Care
- Keep the charging port clean and dry to prevent corrosion or short circuits.
- Clean the light lens with a soft, damp cloth. Avoid using abrasive cleaners.
- Store the light in a cool, dry place when not in use.
- Periodically check the battery level and charge as needed.
Troubleshooting
- Light not turning on: Ensure the battery is charged.
- ANT+ connection issues: Verify that ANT+ is enabled on your cycling computer and that the FR300 ANT+ is within range. Try re-pairing the device.
- Dim light output: The battery may be low. Charge the light fully.
Warranty Information
RAVEMEN offers a two-year warranty on its products, covering defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, visit the RAVEMEN website.
Safety Precautions
- Do not stare directly into the light beam, as it can cause temporary blindness.
- Ensure the light is securely mounted to your bicycle before riding.
- Do not attempt to disassemble or modify the light, as this will void the warranty and may cause damage or injury.
- Keep out of reach of children.
Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE marking indicates conformity with European health, safety, and environmental protection standards.
FCC ID: [FCC ID]
IC: [IC]
Contact Information
For support, inquiries, or to learn more about RAVEMEN products, please visit the official RAVEMEN website at www.ravemen.com.
