Ocu Luminaire

Mounting Dimensions

The luminaire requires a mounting hole with specific dimensions:

• Mounting hole distance from edge: 61 mm
• Mounting hole diameter: ⌀ 68 mm

Electrical Wiring Diagram

This section details the electrical connections for the Ocu luminaire.

The luminaire is designed to operate with a 230V, 50Hz power supply via an integrated LED Power Supply.

The diagram illustrates the connection points:

• N: Neutral
• L: Live

The wiring involves connecting the mains power (230V, 50Hz) to the LED Power Supply, which then powers the luminaire. Proper grounding is essential.

Assembly Instructions

Follow these steps for safe and correct installation:

1. Turn off power: Ensure the main power supply is switched off before beginning installation. [⚡ OFF]
2. Prepare mounting hole: Cut the mounting hole in the ceiling or surface according to the dimensions specified in the "Mounting Dimensions" section.
3. Install mounting box: Place the provided mounting box into the cut-out hole.
4. Attach luminaire body: Secure the main part of the luminaire to the mounting box using the provided screws.
5. Connect power: Connect the 230V power supply to the luminaire's power supply unit. Ensure the ground wire is properly connected. Refer to the "Electrical Wiring Diagram" for specific connection details.
6. Attach cover: Place the luminaire cover onto the main body and push until it clicks securely into place. [✔️ CLICK!]
7. Turn on power: Once assembly is complete and all connections are verified, switch the main power supply back on. [⚡ ON]