AT&T All-Fi Extender WFEXT4991-41

Getting Started

Front View:

The AT&T All-Fi Extender WFEXT4991-41 is designed to extend your Wi-Fi coverage.

Setup Instructions:

1. Download the setup app to set up your All-Fi Extender by scanning the QR code.
2. Aim your camera at the QR code.
3. Login to the setup app and follow the on-screen steps to set up your All-Fi Extender.

Connections:

• 1. All-Fi Extender: The main unit.
• 2. Ethernet cable: For wired connection.
• 3. Power supply: To power the device.

For a video walkthrough, visit att.com/xxxxxx or scan the provided QR code.

Connecting For a Cleaner Future

This package is 100% recyclable. Please recycle to support a sustainable future. Learn more about AT&T's environmental commitment at att.com/environment.

Alternate Setup Method

1. Plug In: Connect the power cord to your Wi-Fi Extender and plug it into a power outlet near your AT&T Wi-Fi Gateway.

2. Power Up: Push the Power button on the back of the Wi-Fi Extender. Wait approximately 2-3 minutes for the light to blink GREEN.

3. Pair: Press the WPS button on your AT&T Wi-Fi Gateway (ensure WPS is enabled). Then, press the WPS button on your Wi-Fi Extender. Wait about 3 minutes for the devices to automatically pair. The light will turn solid GREEN when paired. (Note: The light may turn off during pairing; this is normal. If it does not light up solid GREEN within 5 minutes, repeat the pairing process.)

4. Place: Unplug your Wi-Fi Extender from the power outlet. Move your Wi-Fi Extender to a new location between your Wi-Fi Gateway and the area where you want a stronger signal. The maximum recommended distance between devices is 40 feet, with a maximum of two walls or one floor separation. Extenders work best on open surfaces away from obstructions and interference sources like microwaves.

5. Plug In Again: Plug your Wi-Fi Extender into a power outlet and wait a few minutes for the connection to reestablish and the light to turn GREEN.

You're done!

Troubleshooting

Indicator Lights:

• Solid red light: Indicates a bad location. Move the Wi-Fi Extender closer to the Wi-Fi Gateway or another connected Extender.
• Flashing red light: Indicates the device is out of range. Move the Wi-Fi Extender closer to the Wi-Fi Gateway or another connected Extender.

Pairing Issues:

• Use the included Ethernet cable to connect your Extender to your Gateway and pair them manually.
• Ensure your AT&T Internet service is active and you have an AT&T Wi-Fi Coverage subscription.
• Check Connections: Ensure all cables and cords are connected properly and securely.
• Power Cycle: Unplug your Wi-Fi Gateway for 15 seconds, then plug it back in. Repeat this process for your Wi-Fi Extender. Allow up to 3 minutes for devices to reboot.

For additional support, visit att.com/wifiextender.

Is my Extender working?

• The Extender is paired and functioning when the light is solid green.
• Use the AT&T Smart Home Manager app to check if the Extender is on your network. Download it at att.com/smarthomemanager.

The AT&T Smart Home Manager app allows you to:

• See who is connected to your Wi-Fi network.
• Personalize device names.
• Invite guests to your Wi-Fi network.

Need more coverage?

Purchase additional AT&T Smart Wi-Fi Extenders at att.com/betterwifi.

Additional Information

Manage your account: Download the myATT app at att.com/myattapp.

Accessibility support: For alternate format guides (Braille, large print), call 800.288.2020. For accessible-tagged PDFs, visit att.com/userguides.

Telephone equipment for visual and/or hearing impaired: Phone: 800.772.3140, TTY: 800-651-5111.

For Spanish language support, visit att.com/userguides and select "Ver en español".

Need more help?

Visit att.com/support or call 800.288.2020 and ask for "technical support".

Safety and Regulatory Information

Important Safety Instructions:

1. Indoor use only.
2. Handle the product carefully to avoid damage.
3. Place on a flat, firm, solid surface away from other items. Do not place on soft furnishings or carpets.
4. Use only the provided power supply.
5. To turn off completely, unplug the product. Ensure the power outlet is accessible.
6. Do not locate or use near water, in excessively moist or humid, or poorly ventilated areas.
7. Do not locate in direct sunlight or near a heat source.
8. Do not block ventilation holes or place in an enclosed location that could cause overheating.
9. Never insert objects into openings other than the "RESET" pinhole to avoid electrical shock, fire, or damage.
10. Do not attempt to disassemble or repair the product, power supply, cords, or cables.
11. Unplug before cleaning. Use a dry, lint-free cloth only. Do not use liquids, aerosols, or forced air.
12. Do not touch or use during an electrical storm.
13. Use caution near personal medical devices (e.g., pacemakers, hearing aids) to avoid wireless interference.
14. Do not expose to extreme temperatures. Use only within the specified environment: Air temperature 0°C (32°F) to +40°C (104°F), Relative humidity 20% to 90%.

Federal Communications Commission (FCC) Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Interference Statement: This product has been tested and complies with Class B digital device specifications. Limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee of no interference in a particular installation. If interference occurs, try to correct it by: reorienting/relocating the receiving antenna, increasing separation between equipment, connecting to a different circuit, or consulting a dealer/technician.

FCC Caution: The grantee is not responsible for unauthorized modifications. Operation is prohibited on oil platforms, cars, trains, boats, and aircraft (except in large aircraft above 10,000 feet in the 5.925-6.425 GHz band). Operation in the 5.915-7.125 GHz band is prohibited for control/communication with unmanned aircraft systems. FCC regulations restrict operation to indoor use only.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install and operate with minimum distance of 45 cm (17.7 in.) between the radiating element and any person. This device and its antennas must not be co-located or operating with any other antenna or transmitter.

California Proposition 65: WARNING: This product can expose you to Antimony Trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.