Metabo SX E 400 Orbital Sander
Model: SX E 400 (00405000)
Product Overview
This document provides a detailed parts list and technical diagrams for the Metabo SX E 400 orbital sander. It is intended for service and maintenance purposes.
Diagram of Components
The diagram on page 1 presents an exploded view of the Metabo SX E 400 (00405000) orbital sander. It visually breaks down the tool into its constituent parts, each identified by a numerical label. The components are arranged to show how they fit together. Notable items include:
- Motor assembly (labeled 'M' on page 3).
- Various gears (e.g., intermediate gear, item 1).
- Bearings (e.g., ball bearings, items 2 and 8).
- A fan (item 3).
- A backing pad (item 14).
- The housing and cover assembly (item 19).
- A cable with plug (item 33).
- A rating plate (item 880) indicating weight (3g / 0.11 oz).
- A reference to a diagram (item 1001).
The diagram serves as a visual guide for identifying parts listed in the accompanying table.
Parts List
The following table lists all replaceable parts for the Metabo SX E 400 (00405000), including their position number, quantity, type number, description, and the page number where they are referenced in the original documentation.
| Position | Amount | Type number | Description | PG |
|---|---|---|---|---|
| 1 | 1 | 341055460 | Intermediate gear | 25 |
| 2 | 1 | 143112150 | Ball bearing, 10x26x8 | 24 |
| 3 | 1 | 330000830 | Fan | 15 |
| 4 | 1 | 141180040 | Retaining ring | 11 |
| 5 | 1 | 317002360 | Motor 230V compl. | 36 |
| 6 | 1 | 143112240 | Needle bushing | 15 |
| 7 | 1 | 341055470 | Coated shaft | 25 |
| 8 | 1 | 143115790 | BALL BEARING, 15x32x9 | 15 |
| 9 | 1 | 315414600 | Oscillating plate | 30 |
| 10 | 1 | 316028090 | Carrier cpl. | 29 |
| 11 | 1 | 141180540 | Ring | 12 |
| 12 | 1 | 344095180 | Brake ring | 21 |
| 13 | 1 | 339006170 | Clamping band | 21 |
| 14 | 1 | 339160460 | Backing pad | 29 |
| 15 | 1 | 341702680 | Screw | 11 |
| 16 | 1 | 338035580 | Rating plate | 11 |
| 17 | 9 | 141116020 | Self-tap fill h screw | 12 |
| 18 | 1 | 343369150 | Switch slide | 12 |
| 19 | 1 | 343369020 | Housing with cover | 24 |
| 20 | 1 | 343079760 | Electronic unit,230V/50Hz | 29 |
| 21 | 1 | 141130100 | Hexagonal nut | 11 |
| 22 | 1 | 344100210 | Cable sleeve | 13 |
| 23 | 1 | 344161530 | Hexagonal key | 12 |
| 24 | 2 | 143192430 | O-ring | 12 |
| 25 | 2 | 344092220 | Rubber plug | 11 |
| 26 | 1 | 343362490 | Cable clip | 12 |
| 27 | 4 | 344091420 | Rubber plug | 11 |
| 28 | 1 | 338122410 | Metabo label | 11 |
| 30 | 1 | 343373440 | Nozzle | 14 |
| 32 | 1 | 141122300 | Cap screw | 11 |
| 33 | 1 | 344485880 | Cable with plug | 23 |
| 34 | 1 | 399999990 | Part not needed | |
| 35 | 1 | 344204790 | Adhesive washer | 20 |
| 880 | 1 | 344130930 | Grease 50Gr 1,8oz | 30 |
| 1001 | 1 | 338501100 | Diagram |
Wiring Diagram
The wiring diagram on page 3 illustrates the electrical connections for the Metabo SX E 400. It depicts the motor, labeled 'M', and the electronic control unit, labeled 'E'.
- The motor has two terminals connected to the electronic unit. One connection uses a White ('WH') wire, and the other uses a Blue ('BU') wire.
- The electronic unit has terminals for connecting to the power cord. These connections are labeled:
- A Blue ('BU') wire.
- A Brown ('BN') wire.
- A connection for the ground wire, indicated by a symbol resembling three horizontal lines of decreasing length, or often represented by wavy lines in simplified diagrams.
This diagram is crucial for understanding the tool's electrical system and for troubleshooting or repair.
