Hoover Steam Complete Pet Steam Cleaner
Quick Start Guide
Getting Started
Step 1: Plug In and Heat Up
Plug in your Steam Complete Pet and turn it on. Allow 60 seconds for your unit to heat up, and adjust both dials to your desired setting.
[Illustration: A hand plugging the steam cleaner into an electrical outlet and adjusting two dials on the unit.]
Step 2: Adjust Steam Setting
Adjust steam dial to desired setting. Utilize the Supplemental water tank by turning the dial to 'large area' when cleaning large spaces and turn the dial to 'small area' for quick cleaning.
[Illustration: A hand adjusting a dial on the side of the steam cleaner's water tank.]
Step 3: Use the Trigger
Pull the trigger in short bursts to produce steam and clean. To prevent over-saturating floors, avoid holding down the trigger continuously.
[Illustration: A hand holding the steam cleaner handle and pulling the trigger, showing steam being released.]
Pro Tips
To Engage SteamStream
Press the button on the floor head to activate, and squeeze the trigger to release the steam. Press the button again to deactivate.
[Illustration: A hand pressing a button located on the steam cleaner's floor head.]
To Release the Tile and Grout Scrub Brush
Place your foot on the outer floor head and gently pull away the steam cleaner.
[Illustration: A foot pressing down on the steam cleaner's floor head while a hand pulls the unit away, detaching a brush.]
For Best Performance
Use distilled water.
Tools for Every Mess
The Hoover Steam Complete Pet comes with various tools for different cleaning tasks.
Using Small Accessories
Small tools can be attached with the concentration nozzle. Twist clockwise until locked into position.
[Illustration: A hand attaching a small cleaning tool to the concentration nozzle of the steam cleaner's handheld unit, with an arrow indicating a twisting motion.]
Using Large Accessories
Larger tools can be attached with the concentration nozzle or hose. To attach the hose, twist clockwise until locked into position.
[Illustration: A hand attaching a hose or larger cleaning tool to the concentration nozzle of the steam cleaner's handheld unit, with an arrow indicating a twisting motion.]
To Remove the Handheld Unit
Lift the release button and gently pull away from the steam cleaner.
TIP: Remove the main water tank and fill before use.
[Illustration: A hand lifting a release button on the steam cleaner and pulling the handheld unit away from the main body.]
