Vesync-Warranty Registration
User Manual for Etekcity models including: ESB-591, ESB-591 Smart Body Weight Scale, Smart Body Weight Scale, Body Weight Scale, Weight Scale, Scale
Etekcity ESB-591 Smart Body Weight Scale
Etekcity Bathroom Scale for Body Weight and BMI, Smart Bluetooth Digital Weighing Scale, Upgraded Version of eb9380h Scale, Free VeSync App, Rounded Corner, 11 x 11 inches, 0.1lb/ 0.05kg, 400 Pounds : Health & Household
File Info : application/pdf, 28 Pages, 452.38KB
DocumentDocumentSmart Body Weight Scale
Model: ESB-591
User Manual
Questions or Concerns? MonFri, 9:00 am5:00 pm PST/PDT support@etekcity.com · (855) 686-3835
Table of Contents
Specifications
3
Package Contents
3
Safety Information
4
Function Diagram
6
Display Diagram
7
Before First Use
8
VeSync App Setup
9
Using the Smart Scale
12
Maintenance
15
Common Display Codes
17
Troubleshooting
18
Warranty Information
22
Customer Support
27
2
Specifications
Weight Capacity 400 lb / 180 kg / 28 st Increments 0.1 lb / 0.05 kg
Weight Units lb / kg / st Platform Tempered Glass Battery 3 × 1.5V AAA Batteries (Pre-Installed) Auto-Off 30 seconds
Dimensions 11 × 11 × 0.9 in / 28 × 28 × 2.3 cm Operating System iOS® 12.0+ or AndroidTM 6.0+
Package Contents
1 × Smart Body Weight Scale 3 × 1.5V AAA Batteries (Pre-Installed) 1 × Quick Start Guide
3
READ AND SAVE THESE INSTRUCTIONS
Safety Information
Please read and follow all instructions and safety guidelines in this manual.
Medical
· This scale should not be used to diagnose or treat any medical condition.
· Scale data should not be used as a substitute for medical advice from a healthcare professional.
General Use
· Check the scale before using. Do not use the scale if it is damaged in any way.
· Do not strike or bang on the scale and do not use the scale if there is a crack on the glass. While tempered glass is stronger and fractures more safely than ordinary glass, it may shatter unexpectedly after developing a slight crack. If you see a crack, contact Customer Support (see page 27).
· The glass platform is slippery when wet. Always make sure the platform and your feet are dry before stepping on for measurement.
· Place the scale on a hard, flat surface to avoid tipping.
4
· To weigh safely and accurately, stand with your feet shoulderwidth apart while on the scale. Do not stand on the edge of the scale or jump on the scale.
· Avoid standing on the scale for a long period of time, or when not measuring yourself.
· Do not overload the scale. Maximum weight capacity is 400 lb / 180 kg / 28 st.
· Keep the scale in a cool area with low humidity.
· Keep the scale away from heat sources, such as ovens or heaters. Avoid temperature fluctuations.
· Store the scale in a horizontal position, not a vertical position.
· This scale is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
· Handle with care. Not for commercial use. Household use only.
SAVE THESE INSTRUCTIONS
Batteries
· Do not mix new and old batteries.
· If the scale is not in use for a long period of time, remove the batteries to extend the lifetime of the scale.
5
Function Diagram
A
B
C
D
A. Weighing Platform B. Display C. Anti-Skid Padding D. Battery Compartment
6
Display Diagram
A
B
C
A. Weight Measurement B. Bluetooth® Icon C. Weight Units
7
Before First Use
1. Open the battery compartment on the underside of the scale. Remove the included AAA batteries.
2. Remove the plastic insulator strip from the battery compartment.
3. Replace the batteries. Follow the guidelines in the battery compartment to match the + and terminals.
Push and Lift
1.5V - AAA 1.5V - AAA
1.5V - AAA
8
VeSync App Setup
Note: The VeSync app is continually being improved and may change over time. If there are any differences, follow the in-app instructions.
1. To download the VeSync app, scan the QR code or search "VeSync" in the Apple App Store® or Google Play Store.
Note: · This scale uses the VeSync app, not the VeSyncFit app. · For AndroidTM users, you may need to select Allow to use VeSync.
2. Open the VeSync app. If you already have an account, tap Log In. To create a new account, tap Sign Up.
Note: You must create your own VeSync account to use third-party services and products. These will not work with a guest account. With a VeSync account, you can also allow your family and friends to use your smart body weight scale.
9
3. Make sure to enable Bluetooth® permission of the APP and turn on Bluetooth®. For Android users, please allow the app to access nearby devices in your phone settings.
Note: If your Android phone system is lower than AndroidTM 12.0+, please authorize the location (GPS) permission of the VeSync app in your phone settings.
4. Tap + in the VeSync app and select your smart body weight scale.
5. Follow the in-app instructions to connect to your smart body weight scale.
Note: You can change the name and icon at any time in the smart body weight scale settings.
10
Creating a User
If you are a new user, you will need to enter physical information before weighing yourself for the first time so the scale can calculate your body metrics. Follow the in-app instructions to create a user profile.
Note: · Entering inaccurate information will make the scale's
measurements less accurate. · If you don't identify with the available gender options (or are
unsure) pick the option that you think best physically matches you. This choice is used for physical measurements, such as body fat percentages.
11
Using the Smart Scale
Note: · To see your BMI measurement, you must connect the scale to the
VeSync app (see page 9). · If you are pregnant, scale measurements will not be accurate. · To measure your baby or pet, turn on Baby Mode and follow the
in-app instructions for weighing. Baby Mode will not measure other body metrics and will only measure weight and BMI.
1. Place the scale on a hard, flat surface. [Figure 1.1]
Note: Placing on soft surfaces such as shaggy carpet may cause inaccurate measurements or tipping.
2. Step on the scale, then step off. Wait for the LCD screen to display " " before using.
[Figure 1.1]
12
3. Stand on the scale until the display flashes several times, showing your final measurement. [Figure 1.2] If your smart scale is connected to the VeSync app, your results (weight and BMI) will show in the app.
4. If you want to measure the weight of your baby or pet using the VeSync app, tap on the home page and then tap . Follow the in-app instructions.
[Figure 1.2]
13
Switching Units
1. To change the unit of measurement (kg, lb, or st), lightly tap on the scale and open the VeSync app. Select the scale(you should see "Connected" in the app), then tap the Settings icon ( ).You can adjust the units on this page.[Figure 2.1]
2. The default unit is pounds (lb). After changing units, the scale will show the new unit of measurement.
Device Home Page
LB KG ST
[Figure 2.1]
14
Maintenance
Clearing the Smart Scale
If the scale has been moved or flipped upside down, it must be cleared to ensure accurate results.
1. Place the scale on a hard, flat surface. 2. Step on the scale until digits appear on the display, then
step off. [Figure 3.1] 3. The scale will show " " when cleared. [Figure 3.2]
[Figure 3.1]
[Figure 3.2]
15
Cleaning the Smart Scale
· Use a slightly damp cloth to clean the surface of the scale, followed by a soft, dry cloth to wipe away any remaining moisture.
· Do not use chemical or abrasive cleaning agents to clean the scale.
Replacing the Batteries
The display will show " " when the batteries need to be replaced. 1. Open the battery compartment on the underside of
the scale. 2. Remove the old batteries and dispose of them properly. 3. Install 3 new 1.5V AAA batteries, making sure they are
placed under the correct polarity. 4. Replace the battery compartment cover.
Note: The scale may need to be cleared after replacing the batteries.
16
Common Display Codes
Bluetooth Connection
No Bluetooth Connection
Clearing
Overload
Change Battery
17
Troubleshooting
The scale doesn't turn on. · Check if the batteries are properly installed. If using the scale for the first time, remove the plastic insulator strip from the battery compartment.
Information flashes on the display and then disappears. · The batteries are low and may need to be replaced.
The smart scale can't be added to the VeSync app. 1. Please confirm the following things before pairing:
· The scale should only be connected to your phone via the VeSync App. Please do not connect the scale to your phone's Bluetooth® settings.
· Allow VeSync to access your Bluetooth® in your phone settings. · Your scale and phone are within 30 ft (10 m) of each other. · The scale is not currently connected to any other phone or app. · Your phone's operating system is running on iOS® 12.0+ or Android 6.0+. · You're using the latest version of the VeSync App. · Turn off VPN (please ignore it if you are not using it).
Note: For Andriod 12+ users, make sure that you turn on the nearby device permission and Bluetooth® to scan the target device. For users whose Android system is below Andriod 12, make sure that turn on location and Bluetooth® to scan the target device.
18
2. Try the following steps to pair your scale and your phone: · Enable Bluetooth® on your Phone. · Light up the scale and keep it on. · Open the Vesync App, and click "Add Device" or "+" on the top right corner of the home page. Choose "Health" to select your device model, and then follow the APP guides. Note: Make sure to choose the right device model(you can find it on the back of the scale), or it will lead to a connection failure.
The data can't be synced to the VeSync app. 1. When the scale turns off, it will enter into power-saving mode and
the scale and app will be disconnected. To sync data to the app properly, you need to reconnect the scale and the app through the following steps:
· Restart the Bluetooth® of your phone. · Light up the scale and keep it on, then open the APP to enter
the weighing homepage, wait for the Bluetooth® connection to be successful, then weigh on the scale. 2. Reset your scale or restart the Bluetooth® of your Phone: · Remove the batteries for 5-10 seconds, then put them back in. · Try restarting your phone's Bluetooth® after restarting the phone. · Try the methods in solution 1 again. 3. Bluetooth® detection: · Open the APP to enter the weighing homepage, click "Disconnected" on the top center, and click "Start Testing" to detect Bluetooth® anomalies.
19
The scale readings seem unstable or inaccurate. · Make sure the scale is on a hard, flat surface. · Reset the scale to zero (see page 15).
My scale will only measure my weight, not my BMI. · Set up your smart scale in the VeSync app. Your weight will show on the scale display, and your weight and BMI will show on the app. · Make sure Bluetooth is turned on. Note: If the scale has errors on the display, will not turn off automatically, or has a problem not listed here, try removing the batteries for 3 seconds, then replacing them. If the problem is not resolved, replace the batteries with new ones.
If you still need help, please contact Customer Support (page 27).
Attributions
iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. App Store is a trademark of Apple Inc. Google, Android, and Google Play are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Etekcity Corporation is under license. Other trademarks and trade names are those of their respective owners.
20
Federal Communication Commission Interference Statement Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
21
Warranty Information
Product Smart Body Weight Scale Model ESB-591
For your own reference, we strongly recommend that you record your order ID and date of purchase. Order ID
Date of Purchase
Etekcity Limited Product Warranty
Register your products at https://warranty.etekcity.com/warranty to stay up to date with important product information such as product updates, limited warranties, usage and maintenance recommendations, and notifications concerning safety warnings or product recalls. Registration is not required to claim your limited warranty.
Two (2) Year Limited Consumer Product Warranty
Etekcity Corporation ("Etekcity") warrants that the product shall be free from defects in material and workmanship for a period of 2 years from the date of original purchase ("Limited Warranty Period"), provided the product was used in accordance with its use and care instructions (e.g. in the intended environment and under normal circumstances).
Your Limited Warranty Benefits
During the Limited Warranty Period and subject to this limited Warranty Policy, Etekcity will, in its sole and exclusive discretion, either (i) refund the purchase price if the purchase was made directly from the online Etekcity store, (ii) repair any defects in material or workmanship, (iii) replace the product with another product of equal or greater value, or (iv) provide store credit in the amount of the purchase price.
22
Who is Covered?
This limited warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product, regardless of whether the product transferred ownership during the specified term of the limited warranty. The original consumer purchaser must provide verification of the defect or malfunction and proof of the date of purchase to claim the Limited Warranty Benefits.
Be Aware of Unauthorized Dealers or Sellers.
This limited warranty does not extend to products purchased from unauthorized dealers or sellers. Etekcity's limited warranty only extends to products purchased from authorized dealers or sellers that are subject to Etekcity's quality controls and have agreed to follow its quality controls. Please be aware, products purchased from an unauthorized website or dealer may be counterfeit, used, defective, or may not be designed for use in your country. You can protect yourself and your products by making sure you only purchase from Etekcity or its authorized dealers.
If you have any questions about a specific seller, or if you think you may have purchased your product from an unauthorized seller, please contact our Customer Support via support@etekcity.com.
What's Not Covered?
· Normal wear and tear, including parts that might wear out over time (e.g. batteries, filters, cleaning brush, essential oil pads, etc.).
· If the proof-of-purchase has been altered in any way or is made illegible. · If the model number, serial number or production date code on the product has
been altered, removed or made illegible. · If the product has been modified from its original condition. · If the product has not been used in accordance with directions and instructions
in the user manual. · Damages caused by connecting peripherals, additional equipment or accesso-
ries other than those recommended in the user manual. · Damages or defects caused by accident, abuse, misuse, or improper or inade-
quate maintenance. · Damages or defects caused by service or repair of the product performed by an
unauthorized service provider or by anyone other than Etekcity.
23
· Damages or defects occurring during commercial use, rental use, or any use for which the product is not intended.
· If the unit has been damaged, including but not limited to damage by animals, lightning, abnormal voltage, fire, natural disaster, transportation, dishwasher, or water (unless the user manual expressly states that the product is dishwasher safe).
· Incidental and consequential damages. · Damages or defects exceeding the cost of the product.
Claiming Your Limited Warranty Service in 5 Simple Steps:
1. Make sure your product is within the specified limited warranty period. 2. Make sure you have a copy of the invoice and order ID or proof-of-purchase. 3. Make sure you have your product. DO NOT dispose of your product before
contacting us. 4. Contact our Customer Support team via support@etekcity.com. 5. Once our Customer Support team has approved your request, please return
the product with a copy of the invoice and order ID.
Sole and Exclusive Remedy.
THE FOREGOING LIMITED WARRANTY CONSTITUTES ETEKCITY CORPORATION'S EXCLUSIVE LIABILITY, AND YOUR SOLE AND EXCLUSIVE REMEDY, FOR ANY BREACH OF ANY WARRANTY OR OTHER NONCONFORMITY OF THE PRODUCT COVERED BY THIS LIMITED PRODUCT WARRANTY STATEMENT. THIS LIMITED WARRANTY IS EXCLUSIVE, AND IN LIEU OF ALL OTHER WARRANTIES. NO EMPLOYEE OF ETEKCITY CORPORATION OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY WARRANTY IN ADDITION TO THE LIMITED WARRANTY IN THIS LIMITED PRODUCT WARRANTY STATEMENT.
Disclaimer of Limited Warranties.
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE LAW, EXCEPT AS WARRANTED IN THIS LIMITED PRODUCT WARRANTY POLICY, ETEKCITY CORPORATION PROVIDES THE PRODUCTS YOU PURCHASE FROM ETEKCITY CORPORATION "AS IS" AND ETEKCITY CORPORATION HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY
24
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR PARTICULAR PURPOSE.
Limitations of Liability
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE LAW, IN NO EVENT WILL ETEKCITY CORPORATION, ITS AFFILIATES, OR THEIR LICENSORS, SERVICE PROVIDERS, EMPLOYEES, AGENTS, OFFICERS, OR DIRECTORS BE LIABLE FOR:
(a) DAMAGES OF ANY KIND ARISING OUT OF OR IN CONNECTION WITH PRODUCTS PURCHASED FROM ETEKCITY CORPORATION IN EXCESS OF THE PURCHASE PRICE PAID BY THE PURCHASER FOR SUCH PRODUCTS, OR
(b) INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES EVEN IF ETEKCITY CORPORATION OR ONE OF ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES.
AND REGARDLESS OF WHETHER CAUSED BY TORT (INCLUDING NEGLIGENCE), BREACH OF CONTRACT, OR OTHERWISE. OUR LIABILITY SHALL UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT.
EXCEPT AS COVERED BY THIS LIMITED PRODUCT WARRANTY STATEMENT, ETEKCITY CORPORATION SHALL NOT BE LIABLE FOR COSTS ASSOCIATED WITH THE REPLACEMENT OR REPAIR OF PRODUCTS PURCHASED FROM IT, INCLUDING, BUT NOT LIMITED TO, LABOR, INSTALLATION, OR OTHER COSTS INCURRED BY THE USER AND, IN PARTICULAR, ANY COSTS RELATING TO THE REMOVAL OR REPLACEMENT OF ANY PRODUCT.
OTHER RIGHTS YOU MAY HAVE
SOME JURISDICTIONS DO NOT ALLOW FOR: (1) EXCLUSION OF IMPLIED WARRANTIES; (2) LIMITATION ON THE DURATION OF IMPLIED WARRANTIES; AND/OR (3) EXCLUSION OR LIMIATION OF INCIDENTAL OR CONSEQUANTIAL DAMAGES; SO THE DISCLAIMERS IN THIS POLICY MAY NOT APPLY TO YOU. IN THESE JURISDICTIONS YOU HAVE ONLY THE IMPLIED WARRANTIES THAT ARE EXPRESSLY REQUIRED TO BE PROVIDED IN ACCORDANCE WITH APPLICABLE
25
LAW. THE LIMITATIONS OF WARRANTIES, LIABILITY, AND REMEDIES APPLY TO THE MAXIMUM EXTENT PERMITTED BY LAW. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS IN YOUR JURISDICTION. THIS STATEMENT OF LIMITED WARRANTY IS SUBJECT TO APPLICABLE LAWS THAT APPLY TO YOU AND THE PRODUCT. PLEASE REVIEW THE LAWS IN YOUR JURISDICTION TO UNDERSTAND YOUR RIGHTS FULLY. CHANGES TO THIS POLICY We may change the availability of this limited warranty at our discretion, but any changes will not be retroactive. This warranty is made by: Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 USA
26
Customer Support
If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 USA Email: support@etekcity.com Toll-Free: (855) 686-3835
Support Hours MonFri, 9:00 am5:00 pm PST/PDT *Please have your invoice and order ID ready before contacting Customer Support.
27
01.00_D_23E29_us 28