Product Overview
This document serves as the user manual for the Remax RP1 OLED Digital Voice Recorder with 8GB storage capacity. It provides essential information on specifications, device layout, charging, and various settings to optimize user experience.
Specifications
- Port: USB 2.0
- Display: OLED
- Battery: 260mAh Li-Ion
- Storage: 8GB (expandable)
- Supported music format: MP3, WMA, WAV, APE, FLAC
- Recording format: MP3, WAV
- Frequency response: 20Hz - 20kHz
- Dimensions: 91mm x 29mm x 8mm
- Recording time: Up to 32 hours
Device Layout
The Remax RP1 features several controls and ports for its operation:
- 1. USB port: For charging and data transfer.
- 2. Previous song button: Navigates to the previous track or option.
- 3. Volume Up button: Increases the volume.
- 4. Volume Down button: Decreases the volume.
- 5. Next song button: Navigates to the next track or option.
- 6. Display: OLED screen showing status and menus.
- 7. Recording button: Initiates or stops recording.
- 8. Play button: Starts playback or confirms selections.
- 9. Speaker hole: Output for audio playback.
- 10. Recording hole: Microphone input for capturing audio.
- 11. Menu button: Accesses the device's settings and options.
- 12. On/Off button: Powers the device on or off.
- 13. TF/MicroSD card slot: For expandable storage.
- 14. Earphone port: For connecting headphones.
Charging the Device
When the battery level is low, a notification sign will appear, or the device may turn off automatically. To recharge:
- Connect one end of the USB cable to the Digital Voice Recorder's USB port.
- Connect the other end to a power source (e.g., a computer or USB adapter).
- Recharging takes approximately 2 hours.
- The display will show when the recorder is fully charged.
Settings Configuration
General Settings Access
- Record Format: Press the "Play" button to enter format settings. Use the +/- buttons to choose between MP3 or PCM format. Press "Play" again to exit settings.
- BPS (Bits Per Second):
- For MP3 format, there are three BPS options: 32, 64, or 128kbps. Select using the +/- buttons.
- For PCM format, there are three BPS options: 512, 768, or 1536kbps. Select using the +/- buttons.
- Voice Control: Press the "Play" button to access voice control settings. Use the +/- buttons to toggle it On or Off.
- Monitor Setting: Press the "Play" button to enter the monitor setting. Use the +/- buttons to toggle it On or Off. Press the "Play" button again to confirm the selection.
Detailed Settings Menu
- Auto Shutdown:
- Navigate to this setting using the +/- buttons.
- Press "Play" to enter the setting.
- Select the desired shutdown time (between 1 to 99 minutes) using the +/- buttons.
- Display Settings:
- Brightness: Press "Play" to enter. Choose the brightness level using the +/- buttons. Press "Play" again to confirm.
- Backlight Timer: Press "Play" to enter. Adjust the timer duration using the +/- buttons. Press "Play" again to confirm.
- Data and Time:
- In the settings menu, press the "Play" button to enter the data and time settings.
- Use the "Previous" and "Next" buttons to navigate between time elements (hours, minutes, etc.).
- Use the +/- buttons to adjust the selected time setting.
- Use the "Previous" and "Next" buttons to switch between different options or fields.
- Press the "Play" button when you have finished setting the date and time.
- Language:
- Select the "Language" option within the settings menu.
- Use the "Previous" and "Next" buttons to scroll through and select your desired language.
- Press the "Play" button to confirm your selection and save the language setting.
- Message:
- Player Message: Displays the current software version number.
- Disk Memory: Shows the available storage space and the total memory capacity of the device.
- Formatting:
- If you need to format the device's storage, select this option.
- Press the "Play" button to initiate formatting.
- A confirmation prompt will appear. Use the "Previous" or "Next" button to select "Ok".
- Press the "Play" button to confirm and begin the formatting process.
- Factory Reset:
- To restore the device to its original factory settings, select this option.
- A confirmation prompt will appear. Use the "Previous" or "Next" button to select "Ok".
- Press the "Play" button to confirm and execute the factory reset.
