Included Accessories
The following items are included with your display:
- 4x magnet screws $3*12 stainless steel
- 2x M6*8 screws
- 4x magnetic pads
- 4x $4*30 screws
- 4x $4*30 screw expansion plugs
- 8x $5*60 screws
- 8x $5*60 screw expansion plugs
- 1x Remote Control
- 1x Power Cable
- 1x Quick Start Guide (this document)
Installation
Follow these steps to install your display:
Step 1: Prepare Mounting Bracket
Attach the mounting bracket to the display. Use Ø3*12 screws for landscape orientation and M6*8 screws for portrait orientation. Ensure correct alignment.
Step 2: Mount to Wall
Secure the display assembly to the wall. Use Ø5*60 screws and Ø5*60 screw expansion plugs for wall mounting. Ensure the wall is suitable for the weight.
Step 3: Attach Magnetic Pad and Safety Buckle
Attach the magnetic pad and safety buckle as shown in the diagram for added security.
Step 4: Final Assembly
Complete the mounting process, ensuring all components are securely fastened.
Connections
The rear panel features the following ports:
- LAN
- HDMI 1
- HDMI 2
- HDMI 3
- USB 2.0 (x2)
- LINE OUT
- RS232
Powering On/Off
Connect the power cable. Press the power button [power-symbol] on the device or remote control to turn the display ON. The LED indicator will show the status (ON, SLEEP, STANDBY).
To turn off, press and hold the power button [power-symbol] or use the remote control.
Recycling Information
Do not dispose of this product or its battery with your household waste. For the most up-to-date recycling information, please visit www.agneovo.com/support/recycling.
German: Werfen Sie das Gerät oder die Batterie nicht in den Hausmüll. Die aktuellsten Informationen zum Recycling finden Sie unter www.agneovo.com/support/recycling.
The diagram indicates optimal viewing angles of 30° horizontal and 30° vertical. It also specifies a minimum distance of less than 6 meters.
