Issuing Authority
[DEKRA logo]
德凱認證股份有限公司 (DEKRA Certification Co., Ltd.)
Applicant and Manufacturer Information
Applicant: UAB TELTONIKA TELEMATICS
Address: Saltoniskiu st. 9B-1, Vilnius, Lithuania
Manufacturer: UAB TELTONIKA TELEMATICS
Product Information
Equipment Name: LTE/GNSS Terminal
Brand: TELTONIKA
Model Number: FMC920-QJIB0
Technical Specifications
LTE Bands: LTE700, LTE900, LTE1800, LTE2100, LTE2500, LTE2600
4G LTE Maximum Transmit Power: 25.13 dBm
Operating Frequency (Tx/Rx):
- Tx:703-748MHz / Rx:758-803MHz
- Tx:885-915MHz / Rx:930-960MHz
- Tx:1710-1785MHz / Rx:1805-1880MHz
- Tx:1920-1980MHz / Rx:2110-2170MHz
- Tx: 2500MHz-2570MHz / Rx: 2620MHz-2690MHz
Modulation: QPSK, 16QAM, 64QAM
LP0002 (Bluetooth): 2402-2480MHz: 4.47 dBm(BT), -4.74 dBm(BLE)
Certification Details
Certificate Number: CCAH254G0280T8
Date of Issue: 114年08月12日 (ROC Year 114, August 12)
[TAF Product Certification logo]
[Official Seal 1] [Official Seal 2]
Important Notes and Requirements
Section 11: Warnings or Labeling Requirements
- The equipment shall be clearly marked with the approval label or conformity statement and its model number on the main body, and the regulatory body's logo on the packaging, before public display or sale. The final product shall clearly display the approval label for non-plug-and-play restricted communication modules and the final product model number on the main body, and the regulatory body's logo on the packaging, before public display or sale.
- The Chinese warning statement shall be displayed in the designated location according to the regulatory body or relevant technical specifications.
- For telecommunication terminal equipment with a built-in screen or that requires a screen for operation, the label, model number, or Chinese warning statement mentioned in the first item may be displayed on the screen. The operation method shall be specified in the packaging, user manual, or instructions.
- The approval label and conformity statement label belong to the holder of the approval certificate.
- The holder of the type approval certificate or conformity statement certificate may authorize others to use the approval label or conformity statement label on telecommunication terminal equipment or non-plug-and-play restricted communication modules of the same brand and model. The authorized user of the approval label or conformity statement label shall comply with the requirements of items 1-3 above.
Section 12: Special Recording Items
- If the original applicant, brand, model, hardware, telecommunication interface, appearance, color, material, power supply method, accessories, or antenna is changed, a new approval application shall be submitted, unless otherwise stipulated in this regulation. However, if the telecommunication terminal equipment or non-plug-and-play restricted communication module expands its telecommunication interface without affecting the original approved telecommunication interface function, only the expanded part needs to be submitted for approval.
- If the relevant technical specifications are revised and a deadline is set for re-application for approval, re-application for approval shall be made.
- Properly keep the telecommunication terminal equipment or non-plug-and-play restricted communication module, external power supply, accessories, external antenna, test report or test report compliant test fixture submitted for approval.
