Aosu Solar Wall Light Cam Pro

I. What's Included

The following items are included in the package:

• 1. Camera (L7P3DA11)
• 2. Camera Wall Mount Bracket
• 3. Screw Packs
• 4. USB-C Charging Cable
• 5. Solar Panel Wall Mount Bracket
• 6. Solar Panel Positioning Sticker
• 7. Solar Panel Extension Cable
• 8. Quick Start Guide

The 'What's Included' section displays eight items: the camera unit, a wall mount bracket for the camera, a pack of screws, a USB-C charging cable, a wall mount bracket for the solar panel, a sticker for positioning the solar panel, an extension cable for the solar panel, and the Quick Start Guide booklet.

II. Product Overview

Diagrams illustrate the components of the camera:

The front view shows: 1. Lens, 2. PIR Motion Sensor, 3. Status LED, 4. Charging Indicator, 5. Infrared LEDs, 6. Microphone, 7. Speaker, and 12. Floodlight. The rear view shows: 8. USB-C Port, 9. Reset Button, 10. Micro SD Card Slot, and 11. Power.

III. System Setup

To set up your Aosu camera:

1. Download the Aosu App from the App Store (for iOS devices) or Google Play (for Android devices).
2. Sign up for an Aosu App account.
3. Follow the on-screen instructions within the app to complete the setup process.

IV. Mounting the Camera

This section details the camera's field of view and optimal mounting location:

The diagram illustrates the camera's field of view and motion detection zone. It indicates: 1. The camera's field of view, 2. The motion detection zone, with a recommended range of 3. 7-10 feet (approximately 2-3 meters), and a maximum detection range of 4. Up to 30 feet (approximately 10 meters).

Solar Panel Installation Options

Option 1: Integrated Solar Panel Installation

This option shows the camera and solar panel mounted together on a wall.

The diagram depicts the integrated installation process, labeling the components as: 1. Wall, 2. Wall Anchors, 3. Camera Wall Mount Bracket, 4. Screw Packs, and 5. The Camera unit.

Option 2: Split Solar Panel Installation

This option involves mounting the solar panel separately from the camera.

The process involves removing the screws securing the solar panel to the back of the camera, sliding the solar panel off in the indicated direction, and then following specific steps for the split installation.

V. Notice

⚠️ FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The minimum separation distance is 20cm. FCC ID: 2BACU-L7P

⚠️ IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Declaration of Conformity (CE)

This product complies with the radio interference requirements of the European Community. Aosu declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website: https://www.aosulife.com. This product can be used across EU member states.

Operating Conditions: Do not use the Device in environments with excessively high or low temperatures, or expose it to strong sunshine or excessively humid environments. The suitable temperature for the camera and accessories is -10°C to 50°C.

RF Exposure Information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use the product maintaining a 20cm distance between the device and human body.

For Camera: Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 17.13dBm(EIRP).

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

Disposal Information: This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling, contact your local municipality, disposal service, or the shop where you bought this product.

VI. Customer Service

⚠️ Warranty Information: 12-month limited warranty. The actual warranty period shall be implemented according to the requirements of local laws and regulations.

Contact Information:

• Email: support@aosulife.com
• US: +1-866-905-9950 (Mon-Fri 9AM-5PM PST)
• UK: +44-20-3885-0830 (Mon-Fri 9AM-5PM GMT)
• DE: +49-32-221094692 (Mon-Fri 9AM-5PM CET)
• JP: +81-50-5840-2601 (Mon-Fri 9AM-5PM JST)

Social Media:

• Facebook: @aosulife
• X (formerly Twitter): @aosulife
• YouTube: @aosulife