About This Guide
This quick start guide provides essential information for setting up and operating your Sharp electric bike. For more detailed information, please refer to the online manual available at www.sharpconsumer.com/support/. You can also find it by scanning the QR code provided.
What's in the Box
- 1 x E-bike
- 1 x Quick Start Guide (this document)
- 1 x Warranty Card
- 1 x Charger Manual
- 1 x Charger
- 2 x Pedals
- 4 x Allen Keys
- 1 x Phillips Screwdriver
- 2 x Flat Wrenches
- 2 x Battery Keys
Assembly and Setup
Follow these steps to assemble your electric bike:
- Install and Adjust Handlebars: Attach the handlebar stem and adjust its height and angle for comfort. Ensure it is securely locked.
- Adjust Saddle Height: Loosen the quick-release lever, adjust the seat post height and saddle angle, and then tighten the lever.
- Install Pedals: Use the 15mm wrench to install the pedals. Remember to lubricate the threads before mounting. Note that the right pedal tightens clockwise, and the left pedal counter-clockwise.
Operating Your E-Bike
- Powering On/Off: Insert the key into the frame's bottom slot and turn it counter-clockwise to turn on the device. Press and hold the "U" button to activate the display.
- Using Pedal Assist: The e-bike offers three levels of pedal assistance (0-3). Use the "+" and "-" buttons to adjust the assistance level.
- Lights: Press and hold the "+" button for 3 seconds to turn on the front and rear lights. Press again to turn them off.
- Walk Assist: Press and hold the down button for 3 seconds to activate walk assist mode, which moves the bike at up to 6 km/h.
Battery and Charging
- Charge the battery fully before the first use.
- To charge, open the rubber flap and connect the charger to the e-bike's charging port or remove the battery for charging.
- The charging indicator will turn red while charging and green when fully charged.
- Always use the original charger. The charger has overcharge protection.
- Do not expose the battery to high temperatures or fire. Do not disassemble the battery.
Safety Precautions
- Always wear a helmet while riding.
- Ensure all screws and fasteners are tightened before riding.
- Do not ride in bad weather conditions.
- Avoid performing tricks or dangerous maneuvers.
- Do not carry passengers or excessive cargo.
- Ride slowly in crowded areas.
- Check the brakes, tire pressure, and all components regularly.
- Familiarize yourself with the brake levers before riding.
- Do not exceed the speed limits or ride on unsafe surfaces.
- Ensure the bike complies with local regulations.
Technical Specifications
Refer to the technical specifications table for detailed information on the bike's components, including motor, battery, dimensions, and weight.
For the latest product information and specifications, please visit www.sharpconsumer.com/documents-of-conformity/.
