Instruction Sheet of Air Pump
This series of products utilizes a micro-controller design, achieving domestic advanced performance levels. The product features a beautiful and generous design with double sound insulation and comprehensive protection functions, ensuring quality assurance.
Product Operation
- Press the switch button lightly to activate the continuous oxygen supply mode, and press it again to turn it off.
- Click the "+/-" button to precisely adjust the air volume in four gears.
- Press the "Interval" button lightly with one click to switch to interval mode and add oxygen every ten seconds.
Operating Considerations
- Do not immerse the air pump in water, nor apply oil to it.
- If the air pump accidentally falls into water, immediately disconnect the power.
- Regular cleaning and replacement of the air tube or air stone will result in high airflow and extend product life.
- For your safety, do not use the product if the power cord is damaged.
- Before placing your hand in the water, ensure all electrical power is disconnected.
- When the air pump is in use, it must be positioned higher than the water level. If it is placed lower than the water level, a check valve (stop valve) must be installed in the middle of the air tube to prevent backflow into the pump.
Working Principle and Features of Products
- Greaseless: Operates without needing oil, keeping the air fresh and clean.
- High Performance: Utilizes electromagnetic vibration, resulting in low power consumption.
- Low Noise: Designed based on airflow principles with double sound insulation.
- Stable Performance: Maintains stable air volume and pressure, suitable for areas with smooth water flow.
- Aesthetic & Durable: Features an exquisite, personalized design and is constructed from high-quality, durable materials.
Common Anomalies and Causes
| Situation | Examination | Approach |
|---|---|---|
| Pump does not work properly | Check if the power is connected. | Please set the rated voltage according to the product specifications. |
| Air volume is reduced | Check if the air tube is ruptured or kinked. | Replace the air tube. |
| Temperature becomes higher | Check if the air tube is blocked. | Replace the air tube. |
| Abnormal sound | Check for friction or collision with other objects. | Clean up any debris around the machine, internal magnets, or motor. |
