Flowclear Pool Pump and Filter Connection Guide
Pump/Filter Component Assembly
This section details the assembly of pump or filter components.
Step 1
Two circular components are shown being brought together, indicated by directional arrows.
Step 2
Three cylindrical pipe components are connected. A measurement indicates a required diameter of 2.54 cm / 1 inch for connection.
Step 3
A larger component is positioned over another, with a downward arrow indicating placement. A magnified view shows a tab engaging with a slot for secure fitting.
Step 4
One component is rotated relative to another. A circular arrow signifies a locking or securing action, likely to fasten the parts together.
Step 5
A component is placed on top and rotated clockwise. A small rectangular label is visible on this component, possibly indicating a model or function.
Connecting to Inflatable Pool
This section illustrates how to connect the pump/filter system to an inflatable pool.
Connection Sequence 1
Step 1
An inflatable pool ring is depicted with a multi-port valve. A hose is connected to port A. The "ChemConnect" system is visible.
Step 2
The pool ring and valve are shown. A second hose is connected to port B, likely for pump intake or output, utilizing the "ChemConnect" system.
Step 3
The pool ring and valve are shown with hoses connected to both ports A and B. Water spray is indicated, suggesting the system is operational.
Connection Sequence 2
Step 1
An inflatable pool ring is depicted with a multi-port valve. A hose is connected to port A. The "ChemConnect" system is visible.
Step 2
The pool ring and valve are shown. A second hose is connected to port B, likely for pump intake or output, utilizing the "ChemConnect" system.
Step 3
The pool ring and valve are shown with hoses connected to both ports A and B. Water spray is indicated, suggesting the system is operational.
