FURMAN SERIES III PS-8RE III

Features

• Series Multi-Stage Protection (SMP) for virtually maintenance-free protection from surges and spikes – no sacrificed parts, no service calls, and no downtime.
• Furman's unequaled Linear Filtering Technology (LiFT) rids systems of AC line noise for consistent audio/video clarity.
• Automatic Extreme Voltage Shutdown (E.V.S.) powers down equipment during a prolonged extreme over-voltage.
• Six sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel switched outlet.
• Momentary and Maintained sequencing via rear panel terminal block or front panel switch.
• 10 amp rating.

New in PS-8RE III

• All settings and configuration available on rear panel.
• External delay and remote interface configuration; no need to remove the top cover to adjust potentiometers or jumpers.
• Lower profile depth; shorter depth chassis provides more flexibility with rack placement and cable management.
• Improved "Start On/Off Sequence” rocker switch; tactile black switch replaces push-button.
• Non-illuminated power on/off switch; matte black switch for discreet aesthetics.

Front Panel Features

The front panel includes:

• REAR LAMP SWITCH: Controls the rear-mounted lamp socket.
• DELAY OUTLET BANKS 1, 2 and 3 INDICATORS: LEDs indicating the status of the sequenced outlet banks.
• EXTREME VOLTAGE INDICATOR: LED indicating when E.V.S. has activated.
• POWER ON INDICATOR: LED indicating the unit is powered on.
• SEQUENCING ENABLING SWITCH: A switch to enable/disable the sequencing function.
• RESETABLE 10 AMP CIRCUIT BREAKER: A push-to-reset breaker for overcurrent protection.
• POWER SWITCH: The main power on/off switch.

Rear Panel Features

The rear panel includes:

• AC POWER CORD DETACHABLE: IEC-C13 connector for the power cord.
• CEE-7/7 Schuko Plug: The end of the power cord that plugs into the wall outlet.
• AC INLET IEC-C14 MALE WITH METAL RETAINER CLIP: The input power connector for the unit.
• DELAY 1, 2, 3 OUTLETS BANK SEQUENCED: Six IEC C-13 outlets divided into three banks (2 outlets per bank) that turn on/off in sequence.
• SWITCHED OUTLET: Two IEC C-13 outlets that are switched on/off with the main power.
• PROTECTION OK INDICATOR: LED indicating that the surge protection circuitry is functioning.
• DELAY TIME ADJUSTMENT: Trim pot for adjusting the delay between sequenced outlet banks.
• 3 POSITION DIP SWITCH: For setting remote interface modes (e.g., +12V ON, +12V OFF, GND ON, Mom/Maint).
• REMOTE PORT: Phoenix-type removable 4-pin connector for external control signals.
• LAMP CONNECTOR: BNC socket for an optional gooseneck lamp.

Technical Specifications

Maximum AC Current Rating:

10 Amps, 220 - 240 VAC @ 50 - 60 Hz (Thermal breaker)

AC Cord:

1 mm² x 3, 2.5 m length, IEC-C13 (Female) to CEE-7/7 Schuko plug.

AC Inlet:

IEC-C14 (Male) with metal wire retainer clip.

AC Outlets:

• Convenience Outlet (Front Panel): 1 Switched IEC C-13.
• Rear Panel Outlets: 2 Switched IEC C-13 (1 duplex).
• Rear Panel Outlets: 6 Sequenced IEC C-13 (3 duplexes, each controlled by separate relay).

AC Surge Protection:

• Spike Protection Mode: Line to neutral, zero ground leakage.
• Spike Clamping Voltage: 376VAC peak @ 6,000 Volts / 3,000 Amps.
• Response Time: 1 nanosecond.
• Maximum Surge Current: 6,500 Amps.
• AC Over-voltage Protection: EVS, 275VAC +/- 5VAC.
• AC Over-voltage Reset Modes: Auto.
• Protection Type: Series Multi-Stage Protection.

AC Filtering:

• Technology: LiFT (Linear Filtering Technology).
• Noise Attenuation: 10dB @ 10KHz, 40dB @ 100KHz, 50dB @ 500KHz.

About Furman

Furman is a brand of Core Brands, a Nortek Company.

Website: www.furmansound.com

Address: 1800 S. McDowell Blvd., Petaluma, CA 94954

Copyright ©2014 Core Brands. All rights reserved.