iTECHBC25 Intelligent Battery Charger User Guide

Quick Start Guide

1. Connect the positive and negative copper terminal wires to the corresponding terminal on the iTECHBC25.
2. Connect the positive and negative copper terminal wires to the corresponding terminal on the battery.
3. Connect the iTECHBC25 to a 240V outlet.
4. Flip the power switch; the LED lights should now be on.
5. Verify that the iTECHBC25 is functioning properly. You will know the iTECHBC25 is outputting power when the power, charging, and battery type LEDs are solid.

Product Overview

Introducing the iTECHBC25 Battery Charger, a smart and multi-stage lithium battery charger that incorporates the latest switch-mode battery charging technology. Engineered for 12-Volt batteries, this charger ensures rapid and efficient charging through a multi-stage algorithm, delivering fast, consistent charging without voltage drop.

The iTECHBC25 not only enhances the longevity of battery cells but also acts as a safeguard against premature battery failure. Additionally, it features an innovative power supply function designed to awaken and recharge a battery with low voltage, effectively revitalizing weak or flat batteries. Welcome to the cutting-edge technology of the iTECHBC25, your reliable partner for effective and intelligent battery charging.

Key Features:

• Suitable for charging all common types of automotive or recreational 12-Volt lead acid and LiFePO4 Lithium batteries.
• Silent mode.
• Excellent performance in harsh environments.
• In-built Low-Voltage, Over-Voltage, Over-Temperature and Reverse Polarity Protection.
• Power supply mode.
• Capable of bringing an iTechworld battery out of safe mode.
• Advanced custom iTechworld charging algorithms.
• Adjustable float voltage.
• Easy to use "set and select" menu.
• Multistage charging process.

Display Panel:

The display panel includes indicators for Power, Fault, Full, Charging, Battery Type (STD, GEL, AGM, CAL, LiFePO4), Float Voltage (13.2V, 13.5V, 13.8V), and Mode (Power Supply).

Battery Charging Profile:

To modify the battery charging profile, float voltage, or charger mode, briefly press the corresponding button. As a result, the indicator will move one LED to the right.

LED Charge Indicator:

Power Supply Mode: This mode allows the iTECHBC25 to output a stable voltage and current without being connected to a battery.

Silent Mode: This mode disables the cooling fan for total silent operation whilst lowering the amp output.

Unit Operation:

1. Ensure the switch on the front panel is set to the OFF position, and the 240V AC supply is disconnected.
2. Connect the DC output to the battery that requires charging. Connect the RED cable to the battery + terminal and the BLACK cable to the battery - terminal.
3. Plug the AC power cable into the AC input socket and switch on the 240V AC supply.
4. Turn the switch on the front panel to the ON position.
5. Press the "Battery Type" button to select your battery type; the iTECHBC25 will now initiate the charging process for the connected battery.
6. Once the battery has completed its charging cycle, switch the iTECHBC25 off, and unplug the AC power cable.
7. Disconnect the charging cables from the battery.
8. The iTECHBC25 features a memory function. The next time the unit is connected to the 240V AC supply, it will continue to charge in the mode you previously selected.

Multistage Charging Process:

Stage 1 - Bulk: The battery is charged at 25 amps until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is charged as fast as possible.

Stage 2 - Absorption: For the remaining 20% of the battery, the iTECHBC25 output will taper off as the battery approaches full charge.

Stage 3 - Float: The iTECHBC25 voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery.

Stage 4 - Maintenance: Once the iTECHBC25 has hit float, the unit will stop outputting power. Once your battery drops below a predetermined level (depending on your battery type), the iTECHBC25 will kick back in, maintaining your battery's state of charge.

Fault LED Indicators:

Installation

Install Location:

Choose a suitable location that meets the following criteria:

• Dry: Ensure that no liquids can drip or splash onto the charger. This is crucial to prevent electrical hazards and damage to the unit.
• Cool: Avoid installing the charger in direct sunlight or near heat sources.
• Ventilated: Maintain a space of 10cm away from the side suction and exhaust ports to ensure proper heat dissipation.
• Clean: Avoid installing the charger in a dusty environment. Dust can be drawn into the charger's cooling fan, potentially damaging or reducing its lifespan.
• Close to Batteries: Minimize cable lengths between the charger and the batteries to prevent voltage drop and ensure efficient charging.

Mounting Surface:

If you are mounting the iTECHBC25 on a hard surface like metal or a wood board, consider using anti-vibration mounts between the unit and the mounting surface. This helps reduce vibrations and extends the life of the charger.

Secure Mounting:

Ensure that the charger is securely mounted to prevent any movement or vibrations during operation.

Dimensions: 95 mm (width) x 182 mm (height)

The unit features an AC 240V input port, power switch (ON/OFF), DC output terminals, air intake, air outlet, output fuse, and a temperature sensor port. A remote connection is also noted as "coming soon".

Electrical Connections

Ensure correct connection of the iTECHBC25 to the power source and the batteries it will be charging. Utilize the appropriate wire gauge and connectors to minimize voltage drop and guarantee safe operation.

Maintenance

Ensure that the iTECHBC25 is turned off and disconnected from both the battery and the 240V AC input while conducting any maintenance.

Periodically inspect the charger and the surrounding area to ensure it remains dry, clean, and free from obstructions. Check for any signs of damage or wear and address them promptly.

Also, clean the exterior with a dry cloth to prevent the accumulation of dust and dirt. Additionally, inspect and tighten the DC output terminal screws as needed.

Selection of Cable Size

The iTECHBC25 charger cables may not be long enough for your application. If they need extending, please refer to the table below with the recommended wire sizes. You can select wires that are equal to or larger than the recommended sizes.

iTechworld strongly advises that a properly trained / qualified individual conducts this task. Failure to establish a secure connection could result in a short circuit, potentially leading to fire and property damage.

For wire extensions, it is advisable to utilize soldered butt splice connectors. This ensures minimal resistance in the connections. The optimal approach is to crimp both ends of the connector, followed by soldering both sides of the connector. Once the connection is secured, it is crucial to employ heat shrink tubing to protect the connections and prevent any potential short circuits.

Butt Splice Connector: BN8 for 10-8 AWG

Fuse Specifications

The iTECHBC25 is equipped with an inbuilt 240V AC input fuse, along with an external 40A blade fuse. The external fuse is replaceable if blown; it is essential to install all recommended fuses specific to the below ratings.

Temperature Sensor

The battery charger is equipped with a temperature sensor that we recommend installing on the positive terminal of the battery. This sensor automatically adjusts the charging voltage based on the battery's temperature, ensuring optimal charging performance. In colder temperatures, it increases the voltage for efficient charging, while in hotter conditions, it reduces the voltage to prevent overheating. This feature helps maintain the battery and extend its lifespan.

Specifications

Operating Parameters

Charge Control

The iTECHBC25 complies with AS/NZS 60335.2.29 including Australian deviations.

Safety Precautions

For safe operation and optimal performance, the iTECHBC25 Intelligent Battery Charger must be installed and operated correctly. Please carefully read, understand, and follow all instructions and guidelines in this user guide. iTechworld recommends that a certified technician install the iTECHBC25 charger. Failure to follow these instructions may result in damage to the unit, property, death, or serious injury.

Disclaimer: While iTechworld has taken every precaution to ensure the accuracy of the contents of this user guide, iTechworld assumes no responsibility for any errors or omissions.

Furthermore, all specifications and functionality may change at any time without notice. It is best to view our website for the most up-to-date information.

WARNING: People with physical disabilities, visual, sensory, or mental impairments (including children) should not use this device. Children should be supervised to ensure they do not play with battery chargers.

WARNING: Please select the correct battery charging profile applicable to the auxiliary battery. Selecting the incorrect battery charging profile may cause damage to your auxiliary battery or result in a fire. If you are unsure of the correct battery charging profile to use, please consult your battery's manufacturer.

WARNING: Please use the fuses and wires recommended in this user guide; otherwise, it may result in damage to the charger, a risk of electrical shock, fire, death, or serious injury.

WARNING: Ensure that the selected battery charging profile's charge voltage does not exceed the battery's recommended maximum charging voltage. If you are unsure of the maximum charging voltage of your battery, please consult your battery's manufacturer.

WARNING: Ensure that the continuous output current of the charger does not exceed the battery's recommended maximum charging current. If you are unsure of the maximum charging current of your battery, please consult your battery's manufacturer.

WARNING: When using the charger to charge a lithium battery, ensure that it contains an inbuilt battery management system (BMS) that features under and over-voltage protection with cell balancing. Failure to do so may result in fire, death, or serious injury.

DANGER: Do not disassemble or modify the charger; doing so may result in a risk of electrical shock, fire, death, or serious injury.

DANGER: This charger is only suitable for battery types listed in the manual. Do not use it for other purposes.

DANGER: Do not connect the charger with reverse polarity, as doing so may result in a risk of electrical shock, fire, death, or serious injury.

DANGER: Do not touch the DC output cables together when the charger is switched on or in power supply mode, as doing so may result in a risk of electrical shock, fire, death, or serious injury.

EXPLOSION HAZARD: Do not use the charger in an environment where flammable fumes or gases are present (such as gas bottles, petrol engines, or lead-acid battery compartments).

LIMITATIONS OF USE: Do not use in connection with life support systems or other medical equipment or devices.