Donner HUSH-X PRO Impulse Response (IR) File Import Guide

Step 1: Software Installation

• Visit the official website: https://www.donnermusic.com/support/downloads
• Download the latest version of HUSH-X PRO application
• Double-click the installer and follow the on-screen instructions to complete setup

Step 2: Device Connection

1. Launch the HUSH-X PRO application, turn on the HUSH-X PRO effect system on the guitar.
2. Connect using the cable:
   • One end to your computer's USB port
   • The other end to the Type-C port on your HUSH-X PRO guitar
3. Wait for the system to recognize the device. Upon successful connection, the software will display:

A textual description of the software interface shows a guitar on the left side, and a list of IR files on the right. The interface has sections for 'Presets', 'IR Files', and 'Firmware Update'. There are also controls labeled 'Hold', 'Power', and 'USB'. The list of IR files shows entries like 'IR 01 (Empty)' through 'IR 10 (Empty)'. Below the main interface, there are instructions for connecting the USB and pressing knobs.

Step 3: IR File Import

1. Locate the [IR Files] module in the main interface.
2. Click the Import icon in the toolbar.

A textual description of the file browser window shows a list of IR files, similar to the main interface display. An arrow indicates the import action.

1. In the file browser window:
   • Navigate to the folder containing your IR files.
   • Confirm your selection.

*Note: The import progress will be shown in the status bar. Once completed, the files will appear in the IR library list.*